展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
DKSH Taiwan Ltd.
製品の説明 :
PC F series is designed to produce maximum distillate quality with minimum capital and operating costs. Each model is a compact skid-mounted unit, simple, safe and easy to move. Control is by a PLC, including the functions of feed and discharge, therefore allowing automatic operation and minimum supervision. All models are designed for continuous operation, 24h/day, and require just electrical supply and compressed air.
PC F series evaporators operate in a high vacuum condition, with the boiling chamber pressure set at 5-6 kPa (absolute vacuum), in order to save the thermal energy produced by the heat pump. In this way the boiling temperature of the wastewater is approximately 40°C (104°F) and typical phenomena (scaling, precipitation, corrosion) which may reduce the performance are either eliminated or considerably reduced.
From 0,7 to 24 m3/day – 0.13 – 4.4 US gpm of distillate
Dramatic reduction of volumes and disposal costs
Water reuse and matter recovery
JINN FA MACHINE INDUSTRIAL CO., LTD.
製品の説明 :
YK series is designed specially for small and high precision parts with powerful processing capacity, stable quality and accuracy. It is the best choice for various manufacturers of automotive and motorcycle parts, electronic parts, instrument parts and medical equipment parts.
TSYR TZUN INDUSTRIAL CO., LTD.
製品の説明 :
1.With circuit protection of breaking for motor, once any wire of three phases power source is broken off, this unit could cut off current to motor to prevent motor from being burn out.
2. Drill sleeves、tapping adaptors and borer holder are with rapid adaptors, very convenient for replacement of cutters.
3.Tapping adaptors with torsion control, tap bits are protected from being twisted off.
4.MTM-932ADL comes with drilling force control unit for Auto-feeding:
When drill bit is worn out, this unit will drive feeding intermittently or stop feeding.
Once feeding becomes difficult while making a hole, Please replace a new drill bit or re-sharpen the worn out one in order to protect both drilling tool and machine body from being damaged.
5. MTM-932ADL comes with three intermittent breaking rates for breaking chips :
Choose different feeding rates according to different drill bits and material to perform Auto-feeding operation.
This device can break chips intermittently and discharge them while Auto-feeding is processing, so that chips would not roll on drill bit. Easier to discharge chips.
6. MTM-932ADL comes with three feeding rates for Auto-feeding:
Feeding rates are separately 0, 0.15 and 0.25, please choose suitable rate according to size of drill bit and material of work-piece for drilling.
7. The rotation speed of the MTM-932ADL can be changed quickly during running.
It's very convenient for the operator, and the efficiency is increased accordingly.
Dah Young Vacuum Equipment Co., Ltd.
製品の説明 :
DLC coating has the characteristics of high hardness, low friction coefficient, high density, wear resistance and corrosion resistance. The coating can be deposited at low temperature, so it is widely used in cutting tool, drill, automobile friction parts , decorative coating (such as watch and smart phone case), mechanical parts, various molds and other products.
Dah Young's hard coating equipment has a unique chamber design and power configuration. According to customer needs, we can provide target position design.It can also be equipped with a magnetic filter tube. The serial connection of the magnetic filter tubes in front of each arc target can be adjusted according to process needs, so as to increase the target ionization rate, reduce target particle adhesion, reduce production costs, and improve coating quality.
Please refer to：https://zh-tw.dahyoung.com/
DKSH Taiwan Ltd.
製品の説明 :
The PC R series evaporators have a heating system based on a heat pump and operate under vacuum at 5kPa and around 30°C (86°F).
Heat exchange occurs within a conical jacket, and the boiling chamber inside part is cleaned by internal scrapers that continuously stir concentrate. This configuration is designed to produce a concentrate with a high final concentration and a distillate with low conductivity.
•From 0,1 to 2 m3/day – 0.02 to 0.37 US gpm of distillate
•Dramatic reduction of volumes and disposal costs
•Matter recovery
Extremely suitable when:
•the wastewater has a high initial content of dissolved or suspended solids
•the wastewater is already pre-concentrated
•the daily volumes are relatively small
•the distillate has to be of the highest quality
•the concentrate has to be recycled
YI HSIN TECHNOLOGIES CO., LTD.
製品の説明 :
JIHSENSE INDUSTRIAL37JS F200 TOOL HOLDER PULLING FORCE MEASURING DEVICEJS-F200 拉刀力計係結合本公司力量感測器及掌上顯示器而成之高精度拉刀力測試器，使用應變規為感測元件，變形量小，精度高。適用於 7/24 錐度刀把。一體式的設計，簡潔美觀，免除拉線的煩惱；顯示器使用 LCD 顯示螢幕，省電美觀，具高點保持、自動歸零功能，並可設定三種顯示單位，特別設計的省電線路及自動斷電功能，增長電池使用壽命。握把使用高強度鋁合金重量輕易於攜帶：JS F200 is a high-precision tool holder pulling force tester. It use the strain gauge for the sensing element, with small deformation and high precision. Applicable to 7/24 taper spindle. It integrated the load cell, signal processing unit and LCD display, to a compact measuring device. No connector and cable on it, simple and beautiful. Specially designed auto power off function, increase battery life.
