展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
GUEY CHERNG TRADING CO., LTD.
製品の説明 :
SIMPLE
Tool is clamped in 8 seconds by pushing
only one single button.
SAFE
No heat up – high clamping force. Excellent vibration dampening.
HIGH PRECISION
Toolholder runout TIR ≤ 1 μm
Total system runout TIR ≤3 µm at 3 x D.
powRgrip®
The tool clamping system of today and the future.
TAI CHONG CO., LTD.
製品の説明 :
用途: 車床,直立式車床,旋轉磨床等工作母機研削。<br />
特性:<br />
本體與面板一體成型加工完成。<br />
以電控操作,快速充脫磁場變換。<br />
以永久磁鐵吸著工件,沒有停電的危險性。<br />
吸磁作業面,螺栓孔可應用於模具及固定方式的變化。<br />
可配合彈性導磁塊,針對變形平面,作平面加工,大量節省調整時間,提高工作效率。<br />
結構剛性佳,配合精度穩定,適合高精度加工作業。<br />
與強力型電磁鐵比較,大幅度節省電力消耗。<br />
防水效果最確實,保證不漏水,不漏電。<br />
平均吸磁力18kgf/cm2以上。
MING YANG MACHINERY CO., LTD.
製品の説明 :
This multi-tasking turning center is an advanced machine designed to process precision complex parts in one setup.
Power & Versatility: It has Double Spindles, a VDI/BMT 12 station Turret and a 2nd Y-Axis for back machining with 14 tools for a total capacity of up to 38 tools. This solution with superimposed cutting is a powerful combination of precision and two Y-axes for machining of complex workpieces with extremely fast cycle times.
Front Machining: BMT45 12-Stations, Up to 24 tools, 7.5/11 kW Spindle Power, 55 mm Through Hole.
Back Machining: Gang Tools Slide: 14 Tools, 3 Cross Live Tools, 3 Face Live Tools, 3 OD & 5 ID Tools.
PRECISION MOTION INDUSTRIES, INC.
製品の説明 :
●Equipped with lubrication unit G1, it can reduce the amount of oil used to meet the economic and environmental protection needs in response the carbon reduction trend.
●In required clean environment where it is necessary to avoid oil scattering, and also prevent to temperature rise caused by injecting too much oil.
●Contains more than 70% oil and can run more than 20,000km without oil supply, also easy to supply oil in difficult filling places and saving a lot of maintenance time.
●Even in an environment with water, there is no need to worry about oil and grease being washed by water.
●The extra lubrication unit equals an extra layer of scraping effect, which greatly reduces the chance of foreign matter invasion.
TSYR TZUN INDUSTRIAL CO., LTD.
製品の説明 :
1.With circuit protection of breaking for motor, once any wire of three phases power source is broken off, this unit could cut off current to motor to prevent motor from being burn out.
2. Drill sleeves、tapping adaptors and borer holder are with rapid adaptors, very convenient for replacement of cutters.
3.Tapping adaptors with torsion control, tap bits are protected from being twisted off.
4.MTM-932ADL comes with drilling force control unit for Auto-feeding:
When drill bit is worn out, this unit will drive feeding intermittently or stop feeding.
Once feeding becomes difficult while making a hole, Please replace a new drill bit or re-sharpen the worn out one in order to protect both drilling tool and machine body from being damaged.
5. MTM-932ADL comes with three intermittent breaking rates for breaking chips :
Choose different feeding rates according to different drill bits and material to perform Auto-feeding operation.
This device can break chips intermittently and discharge them while Auto-feeding is processing, so that chips would not roll on drill bit. Easier to discharge chips.
6. MTM-932ADL comes with three feeding rates for Auto-feeding:
Feeding rates are separately 0, 0.15 and 0.25, please choose suitable rate according to size of drill bit and material of work-piece for drilling.
7. The rotation speed of the MTM-932ADL can be changed quickly during running.
It's very convenient for the operator, and the efficiency is increased accordingly.