展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
RENISHAW (TAIWAN) INC.
製品の説明 :
多感測器 5 軸量測系統<br />
<br />
REVO 系統使用同步運動和 5 軸量測技術，在超高量測速度下，大幅減少 CMM 運動的動態影響。這正是藉由 REVO-2 測頭座進行快速運動，同時讓 CMM 以線性緩慢方式運動達成。使用彈性的端部感應測頭，進一步增加系統的精度和效能。可拆式測頭系統與低成本更換器搭配使用，可提高系統彈性。<br />
<br />
<br />
速度、精度、靈活性<br />
<br />
作為新設備或認證升級，REVO® 5 軸量測系統提供：<br />
<br />
• 表面光潔度量測和尺寸檢測。<br />
• 省下 15% 至 50% 循環時間。<br />
• 充分發揮產能，大幅降低資本投資。
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
製品の説明 :
1. CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. With CAB or CBB type volume distributor, oil will feed during operation time. With CDB or T type volume distributor, oil will feed during interval time.
2. The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.
3. It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered.
4. CEN03 type has a pressure switch device and been set up as 8kg/cm2, which assures the oil volume of lubrication point and check if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request.
5. It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal.
6. It has a pressure gauge where an operator can check the pressure easily.
7. Do not press the force feed-oil (F button) more than three minutes in order to avoid overloading. When the temperature reaches 100℃, the sensor will be on to stop the motor continuing running about 5 minutes.
8. It can be used for the machines requiring strictly rationing oil flow. It is usually used for such as processing machines or projecting machines.
YOKE INDUSTRIAL CORP
製品の説明 :
•Rotates through 360° and pivot 180°, and simultaneously allows lifting from any direction.
•Manufactured from forged alloy steel, quenched and tempered.
•Manufactured and tested in accordance with EN1677-1.
•Load rated parts are 100% magnaflux crack detected.
•Individual forged parts and cap screw are traceable to Test Certification.
•Bolt are Metric thread (ASME / ANSI B18.3.1M).
•Proof tested to 2.5 times the WLL.
•Fatigue rated to 1.5 times the WLL.
•All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
•Quick and simple assembly, just a tapped hole is required.
VICTOR TAICHUNG MACHINERY WORKS CO., LTD.
製品の説明 :
．Turning & Milling in one set-up
．Y-axis travel 260 mm (10.2")
．Max. turning dimension Ø500 x 1075 mm
．Turning spindle 4200 rpm / 15 KW with 8” chuck for Vmt-X200, or 3500 rpm / 22 kW with 10” chuck for Vmt-X260
．Milling spindle 12000 rpm / 22 kW
．with HSK-T63 / A63 tooling
．ATC-40 tools
E-TECH MACHINERY INC.
製品の説明 :
e-tech Machinery Inc. introduces EGP, EGA & EGP-A series of CNC cylindrical grinders with superb grinding capabilities and choice of control options. The customers' requirements can be met with a choice of many machine options, such as a touch probe, automatic sizing device, or swing down ID grinding attachment. The complete product line offers a wide range of between center distances and center heights in both plunge and angular wheelhead designs. Automation and turnkey solutions can be offered optional equipment.
TONGTAI MACHINE & TOOL CO., LTD.
製品の説明 :
‧Dual-spindle, dual-turret CNC lathe with an integrated loading/unloading robotic arm.
‧Designed for processes that require automatic single-piece feeding.
‧The MT series features a smaller footprint, shorter automation pathways, and higher productivity.
‧Short travel distances, minimal idle time, and minimal thermal displacement.
‧The TiOperator enables the MT series to achieve efficient 24-hour operation effortlessly.
MATRIX PRECISION CO., LTD.
製品の説明 :
ZHS-3040 combines FANUC controller and PC, it applies linear motors and direct drive motors, developing out the six-axis-control and four-axis-move high-precision grinder. ZHS-3040 can sharpen the blade of straight and helical hobs, it can also sharpen shaper cutters and Power Skiving cutters by options. Self-developed intelligent conversation window software is easy for operation. It meets the brilliant high-precision and high-efficiency performance. One machine with multi- purpose, ZHS-3040 is your best choice.
Giant Red-Wood Int’l & Co. Ltd
製品の説明 :
RW-600A Hydraulic Riveting Machine (Mitsubishi 10” HMI)
(Without Feeding System)
-Safety Device to protect finger get injured
-Proportional Value Control System
-Double-Pumps hydraulic Designed
-Auto-Riveted Counting to avoid missing riveted
-Mitsubishi 10” HMI
-Control System: Mitsubishi PLC
-Pressure Range:2-53KN(6T)
-Horsepower：3HP
-C type throat depth：450mm
-C types throat height：400mm
-Power Voltage：220V Three-Phase
*Mitsubishi 10” HMI can ensure the pressure during the operation. It also can auto-check for faulty.
*Suitable Rivet：Nut up to M10, Bolt up to M8, FH Screw up to M6 (Carbon Steel)
* Proportional Value Control System: Specific Pressure adjust bottom designed, can adjust correctly pressure within 10 second, precision within+/-1%.
*Positive Stop System: Designed for soft working pieces to ensure the flat surface. Thickness accuracy up to +/-0.05mm
*OMRON 5” HMI can ensure the pressure during the operation. It also can auto-check faulty.
*Suitable Rivet：Nut up to M10, Bolt up to M8, FH Screw up to M6( Carbon Steel)
*Pressure control easy to operate: Specific Pressure adjust bottom designed, can adjust correctly pressure within 10 second, precision within+/-1%.
*Positive Stop System: Designed for soft working pieces to ensure the flat surface. Thickness accuracy up to +/-0.05mm
