展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
CLAMPTEK ENTERPRISE CO., LTD.
製品の説明 :
*High supporting force
CSP-P/ CSP-K increases the holding force between the piston rod and the inner jacket to arise the higher supporting force.
*Coolant cleaning measures
In order to prevent the malfunction from the intrusion of high-pressure coolant and the cutting dust entering the internal structure, air can be cleaned at the breathing port when replacing the workpiece. Air cleaning requires a dedicated air circuit. (recommended cleaning pressure is 0.3 - 0.5MPa).
*Universal piping base
CSP-P/ CSP-K piping base is interchangeable, which can be installed with other low-pressure cylinders in the same specifications.
JIN TAIRY ELECTRIC CO., LTD.
製品の説明 :
JPS Technical Specifications
• Input voltage regulation range: rated voltage±15%
• Output efficiency: more than 95%
• Output stability rate: rated voltage±1%
• Waveform distortion: No distortion (compared with input waveform)
• Overload capacity: Above 150% of the rated output current
• Working environment: -0C~+40C
• Induction time: less than 0.1 seconds (less than 5 weeks)
• Working humidity: 95%
JPS Features
• Intelligent logic voltage regulation method
• Self-detection function
• LED indicator on the panel
• Patented bypass device included
• Large-range over-high and low-voltage protection device
• Under-phase instantaneous power failure short-circuit protection device
• Prevent activation of over-voltage device (SOVP)
Electronic double circuit panel design
• The internal panel voltage can monitor the three-phase voltage
• The DIP switch function is easy to set up
• Separated voltage stabilization design, three-phase unbalanced 100%
• Taiwan Patent No. 60215 62577
• Mainland Patent No. 12559 5390066
HYDROKOMP GmbH
製品の説明 :
Swing clamp cylinders release the clamping point on the workpiece. With this, it is easy to change the workpiece. This hydraulic swing clamp cylinder operates as single-acting or double-acting traction cylinder, whereas part of the stroke is used to rotate the piston. The model with 0° swing angle operates only vertical as traction cylinder.
To guarantee a long lifetime the cylinders have an integrated metal wiper as standard. For oil supply, the cylinders are equipped with threaded port and manifold port with O-ring for drilled channels. You can select between right or left turning models with various standardized swing angles. The integrated overload protection protects the swing mechanism from damage due blockage of the rotation or improper assembly of the clamping arm.
For any risk of exceeding the permitted volume flow a throttle check valve must be interposed into the oil supply line. Counter-hold the clamping arm when tightening or loosening the counter nut in order to prevent torque transfer to the piston rod and to avoid damage to the ball guide. Variations with 0°, 30°, 45°, 60° and 90° swing angles are available. The permitted operating pressure is depending from the clamping arm length.
GTW Taiwan Ltd.
製品の説明 :
We develop excellent electric motors that meet every test requirement in the field of e-mobility. We were able to develop a new type of motor family-the RigBes. New bearing concepts and advanced cooling strategies enable temperatures in the motor elements to be kept below 120°C under all operating conditions. Bearing temperatures never exceed the 50°C mark, even at 28,000min-1.