展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
EANG LIAN CORPORATION
製品の説明 :
Steel industry, metal plates rolling production line, wire drawing production line and in processes such as acid pickling, degreasing and cleaning after annealing. Surface treatment such as brushing, grime removal, cleaning, etc. as part of large-scale equipment manufacturing processes for various types of automated production lines.
BEST DIAMOND INDUSTRIAL CO., LTD.
製品の説明 :
Compared to resin bond and metal bond wheels, Electroplated Grinding Tools are noted for relatively large grit protrusion and higher abrasive concentration. This results in very free cutting properties and in high stock removal capacity. Besides, these tools are noted for:
1. Allow special shapes and profile tools to be made at short notice.
2. Cause very little change on wheel shape after used, suitable for precision grinding.
Application and Processing Material for Electroplated Grinding Tools :
1. Internal grinding: Suitable for the internal grinding of carbide and High Speed Steel. The smallest diameter of our electroplating area is 0.3mm so it could be used in drilling for fined ceramics.
2. Jig grinding: Mostly used in fined ceramics processing and precision grinding for quartz. Customized items are also provided to cater your needs. Common grit size is #80~#325, good for rough and fine processing.
3. Touchscreen Processing: Drilling and chamfering for the glass panel of the smart phone and tablet computer. In order to improve work efficiency, we could also combine different grit sizes in the same diamond mounted point.
4. Grinding for Cutting tools: Normal end-mill grinder and drill grinder go with electroplated wheel. Carbide can be ground by diamond wheel and High Speed Steel could be ground by CBN wheel. Bowl-shape wheel with standard specification is also provided, suitable for the grinding of turning tools.
5. Precision grinding: Electroplating can produce wheel of different shapes without deforming it. Therefore, it is suitable for precision grinding or trimming aluminum oxide wheel.
6. Gem grinding: shape grinding for gem, semi-precious stones, shell and jade.
NINE-9 CUTTING TOOLS CO., LTD.
製品の説明 :
NC Helix Drill cuts material by helical interpolation; serrated cutting edge minimizes chip length.
Low spindle power is not a problem, good for drilling material that generates long, soft chips.
● Reduce Your Tool Inventory
Each holder can machine di erent diameters and hole depths, saving your tool inventory and cost!
No need to peck drill or dwell in operation even machine without internal coolant.
● Lower spindle power consumption Easy to cut!
• Thanks to the small cutting load of the serrated cutting edge and helical interpolation lower power consumption. Work quicker, smarter and achieve better results.
• Circular ramping milling, maximum ramping angle is 20°. For example: tool HD27 machining Ø50 mm hole, 9 mm pitch for aluminum, 6 mm pitch for carbon steel.
● Special insert geometry - exceptional swarfs control.
• Serrated cutting edge makes the chips short and small, and easier to evacuate.
• Eliminate swarf and vibration problems while drilling di cult material or deeper holes.
● “One tool” performs multiple applications
• Not only a drill, but an end mill too.
• Small radius path to cut a hole or step hole, various curved cavity shapes on di erent materials.
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
製品の説明 :
1. CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. With CAB or CBB type volume distributor, oil will feed during operation time. With CDB or T type volume distributor, oil will feed during interval time.
2. The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.
3. It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered.
4. CEN03 type has a pressure switch device and been set up as 8kg/cm2, which assures the oil volume of lubrication point and check if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request.
5. It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal.
6. It has a pressure gauge where an operator can check the pressure easily.
7. Do not press the force feed-oil (F button) more than three minutes in order to avoid overloading. When the temperature reaches 100℃, the sensor will be on to stop the motor continuing running about 5 minutes.
8. It can be used for the machines requiring strictly rationing oil flow. It is usually used for such as processing machines or projecting machines.
FAIR FRIEND ENTERPRISE CO., LTD.
製品の説明 :
1. Improve tools life and cutting efficiency, especially ideal for particular process requirements of brittle or hard、 high-temperature superalloy and composite materials.
2. Increased precision and quality of the workpiece to achieve excellent cutting results. (smooth edge)
3. Perfected ultrasonic control technology for easy selection, automatic frequency, and power adjustment.
4. The strong chipping of chassis concentrates the chips into the path as ensures high efficiency.
5. Anti-scale cover + KEVLAR armor material, used in glasses, ceramics super hard metal processing which can preventing dust protection system effectively.。