展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
CHIEN CHENS MACHINERY CO., LTD.
製品の説明 :
Specification
Table size: 1515 x 470 mm
Longitudinal travel: 1300 mm
Cross travel: 600 mm
Y slide way width: 720 mm
Z Slide high: MAX 760 mm
Z Slide way width: 420 mm
Spindle taper: NT#50(BT)
Spindle motor: 7.5HP / 2P
Spindle speed: 62~1100 RPM
Feeding speed: 10~6000 mm/min
Ballscrew: Ø32 mm C5
Net weight: 3200 kgs
CENTURY TRADING CORPORATION
製品の説明 :
• 在以第1及第2主軸進行加工中,以第3及第4主軸進行裝載/卸載動作業，加工/拆裝同時進行，加載時間實際上爲零！
• 4個夾頭，4個操作（OP1、OP2、反轉、工件拆裝）集中到1台機器上，同時進行拆裝。經常出現切屑的高運轉率車床， 大幅縮短循環時間，提高生產效率！
• 由於裝卸用主軸在分隔門外， 更方便於更換夾頭及手動拆裝的機械設計。
• 機械手臂可在機上安裝，在不佔空間的情況下，可以實現自動化。把機械手臂放在滑軌上，就能達到龍門裝載機水平。
ANN WAY MACHINE TOOLS CO., LTD.
製品の説明 :
結構設計簡單，能在機床上直接調整刀尖跳動精度，並可簡單有效的解決因機床主軸老化而引起的跳動偏大問題，使加工孔徑穩定化，提高加工面光潔度及延長刀具壽命。
HO CHEN MACHINERY & ELECTRIC IND. CO., LTD.
製品の説明 :
XYZ軸行程：1000x600x500 mm (39"x24"x20") inch
工作台：1250x750 mm (49"x29" )inch
最大工件：2000x1150x625 mm (79"x43"25") inch
最大工件重：4500 kg
最大電極重：350 kg
機器淨重：5700 kg
油位高度: 110-450 mm (4"-18" )inch
佔地面積尺寸(長x寬x高)：4010x4050x2880 (158"x159"x113") inch
電極板至工作台面距離：430-930 mm (17"-37")
過濾箱：2
過濾網：4
容量：1900公升
3D CNC WINDOWS CE 控制器特點：
> 本系統是採用Windows CE 控制器。
> 採以對話式視窗來呈現且搭配圖片描述功能。
> 具有專門維修畫面來加快維修速度。
> 本機三軸均採用數字尺回授之全閉環迴路設計，故能使定位精度及ORBIT-CUT加工精度及效率大幅提升。
> 具有良好且簡易的操作介面。
*常用的功能鍵都在操作面板上直接使用。
*具有快速按鍵功能。
> 可加裝ATC自動換刀及加裝C軸360度分度，可自動修飾從粗加工至超細加工一次完成。
> 對話式程式，提供各種擴孔模式(各種快速尋邊，尋中心、尋基準點功能)。
> 具有較高顏色的畫質（與PC相同高畫色）。
> 可做自動多段加工(粗→中粗→中細→細→極細)，最多可達10段。
> 加工條件採用加工檔案方式儲存，具有無限組加工條件，每組加工條件可直接編輯修改或儲存，編輯簡易查詢方便。
> 自動尋原點功能及多點座標記憶功能。
> 1/2設計功能及ARC自動放電波形偵測與自動調整。
> 自動中心測位自動補償，可尋孔中心尋孔最深點。定孔加工(循環式、獨立式)，適合不同加工情況。放射狀、圖形、方形、直線(向量式)、錐度、45°擴孔加工。
> 三軸直線、二軸圓弧、三軸螺旋。
> 中/英文版及公/英制切換和Z軸快上、快下及慢上、慢下功能。
> 單軸側放，三軸，六種方向(平面旋轉)。
> 所有警報都可詳細描述發生的問題點、紀錄時間、日期。
> 採光學尺Close-loop位置控制，精度高。
> 自動編輯。可依材質、面積、加工深度、單側間隙、最終電流、電極磨耗等設定。
> CNC機型同樣具有傳統式等能量釋放功能，加工穩定快速，電極消耗小，表面精度均勻。
> 監視畫面加工路徑顯示和圖形顯示功能。
LINE SHENG MECHANICAL & ELECTRICAL CO., LTD.
製品の説明 :
Automatic electrode replacement, high-speed and precise automatic positioning
Multi-hole drilling
SGCAM TECHNOLOGY CO., LTD.
製品の説明 :
主功能介紹：<br />
全中文畫面，易學、易懂、易用，為加工業最適合的加工軟體，操作軟體完全不用背指令。<br />
可由AutoCAD製圖畫出工件外形，再匯入DXF、IGS圖檔，轉換為CNC程式碼。<br />
不必畫3D圖形，一條輪廓線和一條路徑線一般2D圖即可輕鬆轉出車銑的加工程式。<br />
快速C軸填充式的輸入方式 ，很簡單的方式就能轉出C軸加工程式。<br />
參數式的C軸工法操作條件更改G碼自動跟著改變。<br />
製作程式時車銑工法可依加工順序任意作排序調整。<br />
3D實體切削模擬預覽，可避免干涉及過切事件發生。<br />
主軸和副主軸的獨動或同動會自動等待(指定機型) 。<br />
同一個程式中可同時指定不同的切削計算方式有走刀式、走心式、櫛式。<br />
車銑的刀具庫參數可依實際機台型號的刀具位置做個別指定。<br />
可在端面、圓弧面、橢圓面上做刻字。<br />
支援單筆劃字型刻字。<br />
系統支援：<br />
支援廠牌有Citizen 、Star、Miyano、Tsugami、洽群、縉錩、利高、精機、瀧澤、程泰、寶麗金…<br />
支援側銑側鑽等循環加工指令G87、G88、G184<br />
支援極座標G12.1 、G13.1、 G112 、G113<br />
支援圓筒補間G07.1、G107
FALCON MACHINE TOOLS CO., LTD.
製品の説明 :
Easy Setup, Flexible and Sealed for Grinding
The FVGC Series of vertical grinding machines is another prime example of Chevalier's position as the global leader in grinding technology. The series seamlessly increases efficiency and productivity for such industries as semiconductor, punch and aerospace, as well as other sectors for which these machines can be equipped. Workpieces in these fields primarily are a composite, single crystal silicon or brittle, along with other materials that present process challenges.
DKSH Taiwan Ltd.
製品の説明 :
PC F series is designed to produce maximum distillate quality with minimum capital and operating costs. Each model is a compact skid-mounted unit, simple, safe and easy to move. Control is by a PLC, including the functions of feed and discharge, therefore allowing automatic operation and minimum supervision. All models are designed for continuous operation, 24h/day, and require just electrical supply and compressed air.
PC F series evaporators operate in a high vacuum condition, with the boiling chamber pressure set at 5-6 kPa (absolute vacuum), in order to save the thermal energy produced by the heat pump. In this way the boiling temperature of the wastewater is approximately 40°C (104°F) and typical phenomena (scaling, precipitation, corrosion) which may reduce the performance are either eliminated or considerably reduced.
From 0,7 to 24 m3/day – 0.13 – 4.4 US gpm of distillate
Dramatic reduction of volumes and disposal costs
Water reuse and matter recovery
TSYR TZUN INDUSTRIAL CO., LTD.
製品の説明 :
PRODUCT FEATURES
FM-35DL Comes with drilling force control unit for Auto-feeding:
When drill bit is worn out, this unit will drive feeding intermittently or stop feeding. Once feeding becomes difficult while making a hole, please replace a new drill bit or re-sharpen the worn out one in order to protect both drilling tool and machine body from being damaged.
FM-35DL Comes with two intermittent breaking rates for breaking chips:
Choose different feeding rates according to different drill bits and material to perform Auto-feeding operation. This device can break chips intermittently and discharge them while Auto-feeding is processing, so that chips would not roll on drill bit.
Easier to discharge chips.
The machine body is with height adjustment. It’s suitable for both lone and short annular cutters as well as general chuck which is for holding drill with straight handle.
The general chuck is applicable for holding drill which is with straight handle for drilling smaller holes(from 8-13mm).
WEXTEN PRECISE INDUSTRIES CO., LTD.
製品の説明 :
■ Maintained the constant oil temperature in order to prevent process-ing precision-losing.
■ Kept oil viscosity and avoid oil deterioration to stable spindle working.
■ With the temperature control panel to avoid thermal expansion.
■ Built-in failure-detection system that connects to control panel in order to warn users and prevent further damage to machine.
■ Filling high-efficiency environmental refrigerant, without pollution.
PRAISE PRECISION IND. CO., LTD.
製品の説明 :
NEW PRODUCT- CUTTING KNURLING TOOLS USED ON LATHE
Method of forming knurling
1. Press forming(Form knurling)
Press knurling tool directly to workpiece in turning on the lathe
to form the patterns. Pressure is applied to the lathe spindle, and the outside diameter of workpiece will become bigger
2. Cutting forming(Cut knurling)
The knurling tool is applied to workpiece just like cutting, less pressure
to lathe spindle and less machining resistance, forming a clear patterns, the best choice for using on CNC lathes
LEPAO ELECTRICITY MACHINERY CO., LTD.
製品の説明 :
Features
Double servo system, close-loop control , precision transmission, accurate in location
There are 6 combination of working coordinates in the system, it is convenient to design
programs and process workpiece
Showing location immediately, self-diagnostics and indicating error function
Providing with Start, Stop, manual fine-tuning, returning origin when it finished,
convenient to operate
Editing and modifying working program on controller
Chinese/ English switch , easy to operate
Supporting memory card, or USB to load files
The program can make by CAD/ CAM
Previewing route of working program
Control axis X , Y 6 axis maximum
Collocating with Pipe cutting, driller
8 inches LCD, a concise panel
Can install「Dust Collector 」
