展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
GSA TECHNOLOGY CO., LTD.
製品の説明 :
Suitable for Horizontal Machining Center，floor type boring machine。
High Accuracy，Adapting a special anti-wearing alloy of bronze/nickel double-lead worm wheel and hardened steel worm scrrew ensure long term indexing accuracy。
Table size from size 400mm to 2500mm or manufactured manufactured according to customer's designing and interface of machine Saddle。
Hydraulic Clamping,high rigid brake structure for heavy cutting。
Build-in hydraulic ports system suitable for Special Machine of Horizontal machining Center and Automobile/Motorbike Industrial。
DKSH Taiwan Ltd.
製品の説明 :
EVALED® RV F is the line of mechanical recompression evaporators designed to reach the highest level of reliability in heat transfer, with minimum impact in terms of fouling and scaling.
High efficiency forced circulation shell & tube heat exchanger with horizontal tubes allows wastewater concentration up to the salts solubility limits and to manage also suspended crystals.
Wastewater is constantly treated: the distillate and the concentrate are continuously separated and then simply discharged through a pump. Heat is recovered by cooling the two outlet streams using the inlet effluent.
Available in different materials to treat different effluents containing dissolved salty, organic compounds and even the most aggressive salted wastewater (high chlorides content), produced by various industries.
The MVR is the lowest energy consumption evaporation technology.
• Maximum water recovery;
• Effective reduction of waste to be disposed of;
• Modular and flexible;
• Intuitive HMI;
• Plug & play;
• Minimum labour.
Parjet Co.,Ltd.
製品の説明 :
PTFE Glide seal sets consists of a PTFE sealing element with a rubber O-ring functioning as elastic energizer. This type of Teflon seal is mainly used to seal reciprocating rods, pistons, and plungers, commonly found in hydraulic and pneumatic applications. The required sealing effect is achieved by radial pressure, produced by the preloaded element and system pressure, on the lip against mating surface. The elastic energizer pushes the PTFE ring against the mating surface which provides the initial sealing force for the PTFE seal.
TAIWAN MACHINE TOOL CO., LTD.
製品の説明 :
Strong casting and the perfect boxway stucture provides excellent cutting capacity for TTB-20MW Series. Sub-spinfle with milling function and Y-axis can satisfy customers' miltiple needs.
-The one cast base incorporates FEM analysis to achieve its optimal ribbing and structure to further enhance machine rigidity and stability.
-The 30 degree slant bed design has low center of gravity for easier swarf management and better erogonomic design. The TTB-20MW Series also offer optional rear type chip conveyor.
-To make sure the usage life of Y-axis ballscrew will get longer, there are three bearing on Y-axis ballscrew to enhance the support for pressure from top.
-The TTB-20MW Series can achieve maximum 20m/min for X axis and 25m/min for X axis. And the servo motors adopt absolute encoders for faster and more reliable positioning.
WIN-HIGH CO., LTD.
製品の説明 :
牌號: 適用加工材料:<br />
<br />
MD10 厚度小於0.2毫米的銅、鋁等薄片<br />
<br />
MD15 銅、鋁、不銹鋼等薄片<br />
<br />
MD20 通用性強，銅、鋁等薄片<br />
<br />
MD35A Q195 、SPCC等冷軋板<br />
<br />
MD36 EI 片、SPCC板等<br />
<br />
MD40A Q195 、SPCC等冷軋板<br />
<br />
MD45A 矽鋼片，冷軋板<br />
<br />
MD55 矽鋼片，上下沖頭<br />
<br />
ST05B 耐磨性好，模腔形狀簡單的模具。<br />
<br />
ST15B 通用性強，軟磁材料，鐵、銅基粉末模具。<br />
.<br />
ST10F 超細晶粒，適合硬磁材料成形模具。<br />
<br />
MD45A 適合型腔複雜的模具。<br />
<br />
MD50A 適合高負荷且型腔很複雜的模具。<br />
<br />
ST10B 綜合性能好，加工實木、密度板、刨花板及灰口鑄鐵、有色金屬等材料。<br />
<br />
ST10C 通用性強，加工實木、密度板、灰口鑄鐵、有色金屬等材料。<br />
<br />
ST03F 超細晶粒，抗腐蝕性能好、高耐磨，適用於有腐蝕介質的竹木刀具及製動材料的切削刀具。<br />
<br />
ST05F 超細晶粒，高硬度、高耐磨，適用於竹木刀具。<br />
<br />
ST10F 超細晶粒，適合製作形狀簡單的木工刀具和加工銅鋁合金、PCB、玻纖強化材料、制動材料、 <br />
石墨。<br />
<br />
ST11F 超細晶粒，適合加工硬木、密度板、刨花板等木工,竹木材料及加工鋁合金、淬硬鋼、冷硬鑄 <br />
鐵、制動材料。<br />
<br />
ST12F 超超細晶粒，適合加工刨花板, 不銹鋼、高淬硬鋼（硬度＞HRC60）、玻纖強化材料，尤其適 <br />
合金屬的高速切削和乾切削。<br />
<br />
ST15F 超細晶粒，適合加工硬木、密度板、刨花板等木工材料及纖維強化材料。<br />
<br />
ST20F 通用性強，主要適用於灰口鑄鐵、冷硬鑄鐵、合金鋼等。<br />
<br />
ST25F 高溫合金、不銹鋼、鈦合金、淬硬鋼、絲錐。<br />
<br />
MD46A 耐磨性要求高，縮徑、單次變形量小的模具。<br />
<br />
MD50A 加工不銹鋼以及單次變形量不大的模具。<br />
<br />
MD60A 直桿，螺絲，螺帽上模等。<br />
<br />
MD62A 工作負荷較大的沉頭模具。<br />
<br />
MD65A 工作負荷較大的直桿模具。<br />
<br />
MD70A 螺帽下模、工作負荷大的模具<br />
ST06F 直徑小於1.5mm的鋼絲、鎢絲、鉬絲等硬材高速拉絲拉拔和表面光潔度要求很高的有色金屬線 <br />
材的拉製。耐腐蝕性強，在酸性潤滑拉伸時更為優越。<br />
<br />
ST19F 直徑在1.5mm～15mm範圍內的鋼絲、鎢絲、鉬絲等硬材高速拉絲拉拔和表面光潔度要求高的 <br />
有色金屬管（線）材的拉製。<br />
<br />
ST10UF 700系鋁、PCB、銅鋁合<br />
<br />
ST25EF 不銹鋼、模具鋼、高溫合金
