展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
GSA TECHNOLOGY CO., LTD.
製品の説明 :
Dual lead worm wheel / worm shaft which allowable easy backlash adjustment。
Double bearing design suitable for heavy cutting。
One piece of faceplate and spindle design which offer rigid construction。
Large thru hole design which allowable large work piece going thru spindle。
TAIHO TOOL MFG. CO., LTD.
製品の説明 :
The AERO series is very suitable for high-power equipment above 80KW.
It has a sharp cutting edges and grooves for great efficiency of discharging the chips. The coating is OSG's diamond coating with glossy surface. This bright and smooth surface optimizes the performance of the end mill, especially in aluminum alloy that weldability and lubricity are required.
The 3-short-blade type and center jet type (AERO-ETS, AERO-O-ETS) are corner radius end mills applied to roughing and finishing.
The 3-long-blade type and extra long blade type (AERO-ETL, AERO-EXTL) are corner radius end mills applied to roughing and finishing.
The 2-short-blade type (DLC-AIR-EDS) is corner radius end mills applied to roughing and finishing.
Go power machinery CO.LTD
製品の説明 :
Gutian Cam NC Rotary Table internally adopts cam roller transmission mechanism.
There is backlash-free rolling drive between cam and needle bearings pre-load, no sliding
friction or backlash. Its positive reverse motion has high repeatability accuracy, without theneed for periodic calibration and adjustments. This product is featured with high rigidity,heavy load, high efficiency, and its accuracy is not affected by rising temperature.
BEST DIAMOND INDUSTRIAL CO., LTD.
製品の説明 :
Compared to resin bond and metal bond wheels, Electroplated Grinding Tools are noted for relatively large grit protrusion and higher abrasive concentration. This results in very free cutting properties and in high stock removal capacity. Besides, these tools are noted for:
1. Allow special shapes and profile tools to be made at short notice.
2. Cause very little change on wheel shape after used, suitable for precision grinding.
Application and Processing Material for Electroplated Grinding Tools :
1. Internal grinding: Suitable for the internal grinding of carbide and High Speed Steel. The smallest diameter of our electroplating area is 0.3mm so it could be used in drilling for fined ceramics.
2. Jig grinding: Mostly used in fined ceramics processing and precision grinding for quartz. Customized items are also provided to cater your needs. Common grit size is #80~#325, good for rough and fine processing.
3. Touchscreen Processing: Drilling and chamfering for the glass panel of the smart phone and tablet computer. In order to improve work efficiency, we could also combine different grit sizes in the same diamond mounted point.
4. Grinding for Cutting tools: Normal end-mill grinder and drill grinder go with electroplated wheel. Carbide can be ground by diamond wheel and High Speed Steel could be ground by CBN wheel. Bowl-shape wheel with standard specification is also provided, suitable for the grinding of turning tools.
5. Precision grinding: Electroplating can produce wheel of different shapes without deforming it. Therefore, it is suitable for precision grinding or trimming aluminum oxide wheel.
6. Gem grinding: shape grinding for gem, semi-precious stones, shell and jade.
DAH LIH MACHINERY INDUSTRY CO., LTD.
製品の説明 :
龍門型結構,高速加工極穩定。<br />
12,000 / 15,000 rpm高速直結式主軸。<br />
X, Y, Z軸全配置滾柱型線軌。<br />
X, Y, Z軸快速進給率30米/分。<br />
獨創主軸熱補償功能。<br />
立柱結構左右對稱,為最佳熱平衡設計。<br />
X軸獨立於床台上,Y軸獨立於立柱上,無重疊之負荷。<br />
工作台全行程支撐無懸垂,偏移問題,確保最佳加工精度。<br />
三軸滑軌配置線性滑軌,形成穩定順暢,並兼顧高速加工之需求。<br />
衝錘式主軸頭、開頂式護罩。<br />
滾珠螺桿中空冷卻。
MAHO ENTERPRISE CO., LTD.
製品の説明 :
Hydraulic tapping machine is suitable for different size taps (from M4 to M50). The machine is equipped with hydraulic pump system for controlling the spindle to tap. The arm is equipped with lubricated for life bearings at all swivel points, provides weightless operation through the use of gas counter balance springs and permits the operator to bring the tap to the hole with ease.
CHING HSYANG MACHINERY INDUSTRY CO., LTD
製品の説明 :
1. The machine combines TCT saw blade.
2. The master clamp presses from top, and clamps from two sides to
ensure stable and accurate clamping.
3. Oscillating type feeding device with ball screws, driven by servo motor,
has a feeding accurate of 0.01mm.
4. Oil mist type cooling is clean, and does not pollute the air.
5. Saw blade is protected by overload protector.
6. Touch type screen is easy for ordinary operators to use.
7. Front part and rear part of the material, and finished material are
automatically sorted out. Metal chips are removed automatically.
8. Sawing type feeding, hydraulic motor, servo motor and ball screw make
the feeding stable, and improve the tool life.
9. Three point clamped saw blade reduces sawing vibration, and promotes
the sawing blade life.