展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
MAHO ENTERPRISE CO., LTD.
製品の説明 :
Hydraulic tapping machine is suitable for different size taps (from M4 to M50). The machine is equipped with hydraulic pump system for controlling the spindle to tap. The arm is equipped with lubricated for life bearings at all swivel points, provides weightless operation through the use of gas counter balance springs and permits the operator to bring the tap to the hole with ease.
TSYR TZUN INDUSTRIAL CO., LTD.
製品の説明 :
1.With circuit protection of breaking for motor, once any wire of three phases power source is broken off, this unit could cut off current to motor to prevent motor from being burn out.
2. Drill sleeves、tapping adaptors and borer holder are with rapid adaptors, very convenient for replacement of cutters.
3.Tapping adaptors with torsion control, tap bits are protected from being twisted off.
4.MTM-932ADL comes with drilling force control unit for Auto-feeding:
When drill bit is worn out, this unit will drive feeding intermittently or stop feeding.
Once feeding becomes difficult while making a hole, Please replace a new drill bit or re-sharpen the worn out one in order to protect both drilling tool and machine body from being damaged.
5. MTM-932ADL comes with three intermittent breaking rates for breaking chips :
Choose different feeding rates according to different drill bits and material to perform Auto-feeding operation.
This device can break chips intermittently and discharge them while Auto-feeding is processing, so that chips would not roll on drill bit. Easier to discharge chips.
6. MTM-932ADL comes with three feeding rates for Auto-feeding:
Feeding rates are separately 0, 0.15 and 0.25, please choose suitable rate according to size of drill bit and material of work-piece for drilling.
7. The rotation speed of the MTM-932ADL can be changed quickly during running.
It's very convenient for the operator, and the efficiency is increased accordingly.
GUANDA INTERNATIONAL MACHINERY CO., LTD
製品の説明 :
Specifically designed for steel beam / structural steel processing. STD 105 equips with 3 spindles working simultaneously. Each spindle works with a BT-40 ATC, which increases the working efficiency and flexibility.
We apply MQL (minimum quantity lubrication) not only to improve the working environment but also to reduce the operation cost.
We provide various automation solutions to meet your needs.
YING HAN TECHNOLOGY CO., LTD.
製品の説明 :
Suitable for cutting various metal sheets
■Maximum cutting thickness of metal sheet varies with the laser power.
■Upon customer request, the machine can be designed with a work piece platform as mechanism(optional). It helps to reduce work piece loading/unloading time, which in turn upgrades operation efficiency.
■Large laser power, high efficiency and high productivity.
■Equipped with an intelligent digital controller featuring humanized control, which is easy to learn and operate.
■The specially designed software allows the operator to design the graphs on characters with ease, then machining can be conducted immediately.
■Enclosed splash guard
■Fast machining, power saving, outstanding safety protection, low trouble and easy maintenance.
For cutting commonly used metal sheets such as:
■Carbon steel sheets
■Alloy steel sheets
■Galvanized steel sheets
■Stainless steel sheets
RICH SOU TECHNOLOGY CO., LTD.
製品の説明 :
This machine is an improved model from the Y Rail model, featuring similar functions.
Designed standard with 4-station hanger with two side doors on blasting chamber. To meet your specific production line requirements, additional hangers are available for the entire working environment. Contact us for further details.
Features:
1.The machine employs a PLC controller for continuous cycles of blasting operation.
2.The cycle motions are: the hanging shaft enters the blasting chamber, and then moves to a fixed position at a lower speed. The door closes automatically.
Once the door is closed, the blade starts running automatically, and the machine performs blasting. Once operation is accomplished, steel balls are supplied and the blade stops automatically.
When the blade comes to a complete stop, the door opens automatically. When the door opens to the fixed position, the chain conveyor quickly delivers the nest hanging rod into the blasting chamber, then moves forward at a lower speed to a fixed position.
The door closes automatically and performs the nest cycle of blasting operation.
YATAGHAN ENTERPRISE CO., LTD.
製品の説明 :
Cristone Bristle Brush consists of Crystal Fiber Stones. The cutting performance, tool life and flexibility is superior than any other polishing stones or brushes.
It can efficiently remove the roughness of the surface but prevent excessive shaving.
For different grinding purposes and processing ways, we provide a wide selection of variable types for solutions so you can greatly boost your efficiency of grinding or polishing.
JAR HON MACHINERY CO., LTD.
製品の説明 :
1.Both cutting TAP and forming TAP are suitable.
2.Fully automatic machine so a person can operate many machines.
3.Gear-pitch type auto. tapping will get a precise & accurate thread for finished workpiece.
4.It can option to add inverter or use servo motor to control the spindle speed.
4. Especially suitable for light workpiece.
MATRIX PRECISION CO., LTD.
製品の説明 :
GHP-3540 applies the FANUC controller and high speed grinding spindle, through the in-house developed intelligent conversation window software, it can flexibly output the required tooth profile and grinding parameter. The machining workpieces include the involute gears and cycloidal gears, the high efficiency and high precision expressed from the product are equivalent to worldwide top brand's ones. GHP-3540 is your best choice.
YIH KUAN ENT CO., LTD.
製品の説明 :
1. Semiautomatic processing angle head suitablel in all type of milling heads, can change the processing angle and also bring the powerful and high-quality cutting benefits for machine.
2.This product uses for Japanese gear grinding, so the spindle speed can up to 2000rpm and also can bring the powerful and high-quality cutting benefits for machine.
3. This product offer manual or semiautomatic two type for your optional.
4. This product offer one degree or five degree for your optional.
