展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
XIN GONG YANG MACHINERY CO., LTD.
製品の説明 :
◎Spindle Taper：ISO-50
◎Outside Diameter of Flange：Ø250 / Ø300
◎Ｍax. Speed：1500RPM
◎Applicable work:
0~800RPM-heavy cutting；
800~1500RPM-finish milling,drilling,boring.
Dah Young Vacuum Equipment Co., Ltd.
製品の説明 :
High Power Impulse Magnetron Sputtering (HiPIMS) is a high-power pulsed power supply system used on magnetron sputtering coating technics. Compared to the traditional DC sputtering system, HiPIMS could generate tens of times higher pulsing current to obtain a ten thousand times higher-density electron plasma. Effectively enhancing the ionization rate to obtain a non-porous, high density crystallinity film at lower coating temperatures.
DAH YOUNG's DYHC HiPIMS series sputtering coater power supply and chamber cavity are designed to provide high plasma density (1018~19e-/m3) and high ionization rate (70~100%), increasing the substrate coating compactness, adhesion flatness and corrosion resistance. The lower duty cycle (<5%) results in a significant reduction in process temperature offering more substrate options on PEN, PET, etc. fiexible substrates.
Please refer to：https://zh-tw.dahyoung.com/
EANG LIAN CORPORATION
製品の説明 :
刷、磨、拋、洗<br />
專業化的設計能力<br />
多樣化的線材應用<br />
客制化的生產系統<br />
提供客戶製程製品-刷、磨、拋、洗.全方位的解決方案<br />
瑩聯股份有限公司—主要供應各式工業用刷是工業用刷之專業設計製造廠、擁有自有品牌（優利牌），產品適用於各行各業。無論需要刷洗、精細研磨、拋光、輕研磨、重研磨、毛邊去除、深孔加工皆有顯著效果!<br />
<br />
主要產品：<br />
1.動力輪刷系列適用於各型電動及汽動工具.<br />
2.矽砂尼龍研磨刷系列可針對各種表面精細研磨.<br />
3.輪軸刷及板槽刷系列接受各種線材及特殊尺寸訂製<br />
4.鋼鐵業退火酸洗、脫脂清洗、刷磨、清洗等大型刷輥<br />
5.德國技術合作專業生產高科技合成纖維輥適-用於鋼鐵軋片產線之刮油輥、塗油輥、擠水輥、張力輥、轉向輥、擠油輥、擠乾輥、擠壓輥、擠水輥、不織布擠水 輥。 6.各種線材及特殊尺寸可依照客戶需要量身訂製
GUAN-YU MACHINERY CO., LTD.
製品の説明 :
Dual grinding spindle，
This model is equipped with OD grinding wheel 405mm，
X, Y, Z axis stroke 750/320+150/320+200mm
XIN GONG YANG MACHINERY CO., LTD.
製品の説明 :
◎Spindle Taper：ISO 50
◎Outside Diameter of Flange：Ø250 / Ø300
◎Max. Speed：3000RPM
◎Applicable work:
0~800RPM-light cutting；
800~3000RPM-finish milling
YATAGHAN ENTERPRISE CO., LTD.
製品の説明 :
36W/40W is lightweight Single Function Ultrasonic Polisher with affordable prices so it totally fits the requirements of endusers.
The high micro vibration stroke frequency saves time to reach a quality result of polishing and finishing.
Their shaking is much smaller than Air Tools and it is perfect for objects that needs detailed polishing. Like precision molds, electronic molds, PCB boards, jewelry and so on.
Taiwan Auto-Design Co.
製品の説明 :
// SolidMEN-300的優點
✅ 材料: 不綁材料僅建議合格廠商,未來可自行選用適合材料
✨ 雷射: 德國 500W 水冷式雷射穩定性佳
⚡ 層厚: 層厚可控範圍 10~100μm (最小進給單位 10μm)
🛠️ 成品: 可列印多種金屬材料,強度超過鑄造,可作為表面後處理及拋光使用
🔬 研發: 不綁參數開放製程研究,未來材料無受限可自行開發
⬆️ 尺寸: 300x300x300 可製作大尺寸工件,另有機型可增大或縮小
💎 緻密度>99.5%,品質優於鑄造,近似鍛造
🤖 搭配遠端資訊與智能化視覺模組,方便製程穩定性及智慧化整合。
(即時錄影、列印層數/高度、雷射功率、粉未剩餘量、腔體含氧量、製程時間等)
TSYR TZUN INDUSTRIAL CO., LTD.
製品の説明 :
1.With circuit protection of breaking for motor, once any wire of three phases power source is broken off, this unit could cut off current to motor to prevent motor from being burn out.
2. Drill sleeves、tapping adaptors and borer holder are with rapid adaptors, very convenient for replacement of cutters.
3.Tapping adaptors with torsion control, tap bits are protected from being twisted off.
4.MTM-932ADL comes with drilling force control unit for Auto-feeding:
When drill bit is worn out, this unit will drive feeding intermittently or stop feeding.
Once feeding becomes difficult while making a hole, Please replace a new drill bit or re-sharpen the worn out one in order to protect both drilling tool and machine body from being damaged.
5. MTM-932ADL comes with three intermittent breaking rates for breaking chips :
Choose different feeding rates according to different drill bits and material to perform Auto-feeding operation.
This device can break chips intermittently and discharge them while Auto-feeding is processing, so that chips would not roll on drill bit. Easier to discharge chips.
6. MTM-932ADL comes with three feeding rates for Auto-feeding:
Feeding rates are separately 0, 0.15 and 0.25, please choose suitable rate according to size of drill bit and material of work-piece for drilling.
7. The rotation speed of the MTM-932ADL can be changed quickly during running.
It's very convenient for the operator, and the efficiency is increased accordingly.
MATRIX PRECISION CO., LTD.
製品の説明 :
2080/3080 applies the FANUC controller and high speed grinding spindle, it will design the tooth profile and grinding parameters flexibly through the intelligent
conversations window software. The machinable workpieces include the standard worms
(ZK, ZI, ZN & ZA), dual-lead worms, ZC (Niemann) worms, thread plug gauges and rolling dies. The high efficiency and high-precision machining performance meet the worldwide top brand products in this field. 2080/3080 is your best choice.
