展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
MING HUNQ MACHINERY CO., LTD.
製品の説明 :
GD-100 is a device that can serve your need for grinding and chamfering of sheet metal. Such as flame cutting, laser cutting, punching of the residue and bristles after stamping. All of the sharp angle of the edges and inner holes can easily be done on this machine.
Taiwan Auto-Design Co.
製品の説明 :
// SolidMEN-300的優點
✅ 材料: 不綁材料僅建議合格廠商,未來可自行選用適合材料
✨ 雷射: 德國 500W 水冷式雷射穩定性佳
⚡ 層厚: 層厚可控範圍 10~100μm (最小進給單位 10μm)
🛠️ 成品: 可列印多種金屬材料,強度超過鑄造,可作為表面後處理及拋光使用
🔬 研發: 不綁參數開放製程研究,未來材料無受限可自行開發
⬆️ 尺寸: 300x300x300 可製作大尺寸工件,另有機型可增大或縮小
💎 緻密度>99.5%,品質優於鑄造,近似鍛造
🤖 搭配遠端資訊與智能化視覺模組,方便製程穩定性及智慧化整合。
(即時錄影、列印層數/高度、雷射功率、粉未剩餘量、腔體含氧量、製程時間等)
TSYR TZUN INDUSTRIAL CO., LTD.
製品の説明 :
1.With circuit protection of breaking for motor, once any wire of three phases power source is broken off, this unit could cut off current to motor to prevent motor from being burn out.
2. Drill sleeves、tapping adaptors and borer holder are with rapid adaptors, very convenient for replacement of cutters.
3.Tapping adaptors with torsion control, tap bits are protected from being twisted off.
4.MTM-932ADL comes with drilling force control unit for Auto-feeding:
When drill bit is worn out, this unit will drive feeding intermittently or stop feeding.
Once feeding becomes difficult while making a hole, Please replace a new drill bit or re-sharpen the worn out one in order to protect both drilling tool and machine body from being damaged.
5. MTM-932ADL comes with three intermittent breaking rates for breaking chips :
Choose different feeding rates according to different drill bits and material to perform Auto-feeding operation.
This device can break chips intermittently and discharge them while Auto-feeding is processing, so that chips would not roll on drill bit. Easier to discharge chips.
6. MTM-932ADL comes with three feeding rates for Auto-feeding:
Feeding rates are separately 0, 0.15 and 0.25, please choose suitable rate according to size of drill bit and material of work-piece for drilling.
7. The rotation speed of the MTM-932ADL can be changed quickly during running.
It's very convenient for the operator, and the efficiency is increased accordingly.
PEIPING PRECISION ENTERPRISE CO., LTD.
製品の説明 :
*Automatic spindle polishing control.
*Keep the precision of spindle and no damage to spindle body.
*One setting for the maximum convenience of operation.
[After Use]
*Extend the life of cutting tools.
*Increase workpiece accuracy.
*Reduce the spindle vibration and extend the life of spindle.
MAHO ENTERPRISE CO., LTD.
製品の説明 :
Hydraulic tapping machine is suitable for different size taps (from M4 to M50). The machine is equipped with hydraulic pump system for controlling the spindle to tap. The arm is equipped with lubricated for life bearings at all swivel points, provides weightless operation through the use of gas counter balance springs and permits the operator to bring the tap to the hole with ease.
Hantop Intelligence Technology
製品の説明 :
Tool Holder Spec. provided:
BT30, BT40, HSKA63, HSKE25, HSKE32, HSKE40, CAT40
1. High Speed, high efficiency ultrasonic machining solution for high precision advanced materials machining(can reach 38000 rpm)
2. Plug and Play design for convenient and flexible Installation
3. Effective Intelligent Tracking System for advanced materials machining, finding the suitable resonance between tools and modules
4. Non-Contact transmission Design doesn't limit the high spindle rotation and reduce the impact from cutting heat, enhancing tool life and quality to next level.
RINGTECH INSTRUMENTS CO., LTD.
製品の説明 :
IFP vacuum cleaning machine can effectively clean any size and structure of complex metal products, great for either large or small amount of cleaning, it is also the best vacuum cleaning machine available for environmental protection and energy-saving! The cleaning cycle is carried out in a complete vacuum environment that the working environment is clean and odourless. During operation, the user can select different options from spray, rotate, ultrasonic, rinse...etc. based on the workpiece. With the cutting edge iFP cleaning technology, overcoming difficult cleaning situations such as cleaning blind holes, slits can be effortless. After cleaning, the chips and residual cutting oil will be separated from the cleaned workpiece, the chips are fully dried and can be collected from the filter; the residual cutting oil will also be separated from water and could be recycled and reused.
Facing the new industry trend and the new future, IFP cleaning machine is your best cleaning choice!
TAIWAN 3AXLE TECHNOLOGY CO., LTD
製品の説明 :
Colour Marking Fiber Laser
Marking Machine
Good for metal materials, All polycarbonate material, plastic Stainless steel and other metal materials surface marking.
Laser safty goggles, Simple Fixture, External red light, Foot Switch.
Taiwan laser marking software
Availavle in 9 languages, English, Traditional/Simplified Chinese, German, Japanese, Polish, Portuguese, Turkish, Vietnamese, Portuguese, Turkish, Vietnamese.
Deep engraving, Metal marking, Serial number, QR code, Data matrix all in one machine.
Auto focus up to 4cm.
3D Rotary up 120º degree.
