展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
HAWE Hydraulik Singapore Pte. Ltd. Taiwan Branch
製品の説明 :
Compact hydraulic power packs are a type of hydraulic power pack. They arecharacterised by a highly compact design, since the motor shaft of the electric drive also acts as the pump shaft. Compact hydraulic power packs are designed to supply hydraulic circuits with hydraulic fluid.
The compact hydraulic power pack type INKA consists of the tank, the integrated motor and the radial piston pump or gear pump directly attached to the motor
shaft. The directly mounted electronic communication box with integrated realtime operating system allows the operating state to be recorded and visualised. The
measured values of the integrated multi-sensor (including the motor speed) can be passed on to the higher-level machine controls via standardised interfaces and processed there.
The consistently modular design of the type INKA means that different usage volumes and delivery flows can be realised quickly and easily from the modular
system. Compatible, ready-for-connection, complete solutions can be assembled easily using a wide range of connection blocks and the valve banks that can be combined with them.
Features and benefits
■ Prepared for condition monitoring with integrated sensors and communication box
■ Optimum efficiency through under-oil motor cooling, direct power transmission,and sophisticated heat dissipation
■ Suitable for nominal operating modes S2 (short period operation) and S3 (periodic intermittent operation)
■ Resource-saving due to small oil filling volume
Intended applications
■ Machine tools and material testing
■ Hydraulic tools
■ Handling systems
■ Presses and processing machines
MANFORD MACHINERY CO., LTD.
製品の説明 :
VX-600 5-Axis Machining Center is designed for multiaxes machining of small and large series of complex 5-side workpieces. With swiveling head and rotary table, VX-series is able to do simultaneous 5 axes machining with high accuracy.
High proformance swiveling head, tilting angle from -120 ~ +30 equipped with 15,000rpm built-in spindle.
VX-600/VX-600T is with an enbedded Ø 630mm diameter rotary table. Any complex workpiece can be accomplished with a single setup.
REN AN INFORMATION TECHNOLOGY CO., LTD.
製品の説明 :
RenAn's operation simulation workstation is a physical simulation with 3D graphic, showing the cutting and machining process.
[Save consumable cost]: There is no need to worry about the expenditure of consumables, and it will not be affected by pollutants such as waste materials and oil and gas.
[Safety]: Advanced 3D simulation and CNC virtual machine make high risk CNC operation without any danger.
[Smart learning]: Like training the pilot using flight simulators, we use CNC simulator to train the students or operators to be the machinist. Its industrial panel remains the same functionality as real machine that students can practice constantly to accumulate hands-on operation skills.
The controller series of simulator: Fanuc, Siemens, Heidenhain and Mitsubishi.
Turning, Milling, TurnMill, 4 axis, 5 axis.
HAWE Hydraulik Singapore Pte. Ltd. Taiwan Branch
製品の説明 :
Directional seated valves are a type of directional valve. As cone valves they are tightly sealed, with zero leakage in the closed state.
The directional seated valve type ROLV is available as a 3/2, 4/2 or 4/3-way directional seated valve with different plug types. The patented assembly consists of two parts: a round basic valve with the valve inserts, and an adapter plate which can be designed for manifold mounting with nominal size NG 6 as the
standard connection pattern, or for direct pipe connection.
Additional elements such as a check valve, a restrictor (on the consumer side) and/ or restrictor check valves can be integrated, depending on the functional requirement and adapter plate. The type ROLV can be combined in the valve bank type BA with other types of valves.
Features and benefits
■ Dirt-resistant design with high switching reliability
■ Interchangeable solenoid for greater flexibility and easy servicing
Intended applications
■ Machine tools (cutting and non-cutting)
■ Clamping tools, punching tools, fixtures
■ Testing machinery
■ Wind turbines
FAIR FRIEND ENTERPRISE CO., LTD.
製品の説明 :
★Gantry type structure
- Designed with a gantry type structure, the Feeler U800-5AX 5-axis machining center has the feature of spacious machining space, allowing large workpiece to be loaded and unloaded with ease. It is also convenient for operator to check the current machining condition at any time.
★U-shaped construction of base and column
-The advanced U-Shape structure significantly increases structural rigidity and machining accuracy.
-X.Y.Z axis rapid traverse rate reach 48m/min.
- Suitable for equipping with a large diameter of rotary table.
★Three axes overlap and separated from two rotary axes
- This design avoids a distance between the machining point and the intersection point of two rotating axes.
- Easy to compensate for the errors of radius on rotating axes and movement on three linear axes to ensure the machine's stability and accuracy.
★Separated design for three axes moving area and machining area
- This design feature not only makes chip removal more convenient, but also enables better chip-prevention capability of the machine.
- The rotaary shaft speed is increased by 800 rpm, which makes the turntable have a high-speed turning function.
FAIR FRIEND ENTERPRISE CO., LTD.
製品の説明 :
★Moving column structure :
The M-shaped structure increases anti bend and anti-torsion of the column The counter-weight is supported by the pneumatic cylinder. The shape of the column is similar to the pyramid to increase the stability for moving.
★One piece base structure :
The rigidity of structure is good. The outer shape is not complicated, it is easy for machining. The internal structure adopts the box type design to increase the bearing capacity.The round shape hole is easy to clear sand and increase force flow. The work tableadopts the high and low rail design to increase the rigidity.
★Rotary spindle head structure:
Reduce the interference machining area.
★Modular design :
By changing the column head of the column, etc., the customer can have a variety of opportunities to choose from.
★Turning and milling function(OPT)
Shorten the product manufacturing process. To improve the production efficiency, accuracy and reduce the clamping times and floor space. It can be used in aerospace parts and medical equipment precision molds.
EUMACH CO., LTD.
製品の説明 :
HSM-5X系列是最新的機器與萬能的應用，完美回應數控五軸加工與工件的定位與刀具軸空間要求，為複雜零件的加工提供了廣闊的應用範圍。
本機採用C型架構，機床為高剛性完全支撐結構，機械經久使用，能長時間維持穩定狀態，旋轉銑頭B軸與旋轉工作臺C軸為獨立分開無重迭之兩旋轉軸，便利於工件、刀具及夾制具等設計及擺放，尤其相互干涉現象較旋轉兩軸重迭之銑頭或工作臺大幅減少。並可選用車銑主軸及高速旋轉工作台，達到車銑複合綜合加工。
HSM-5XC是大型高效切割和加工應用的最佳解決方案，無論您的重點是靈活的單元生產還是大批量精密製造，如航空工業的渦輪葉輪，葉盤等，或醫療的心臟瓣膜，人工關節或牙齒等，當然，一般加工，如模具加工或僅5面或多面加工都非常容易！
本機採用實的米漢娜鑄鐵結構，三軸為重型滾柱直線導軌進給系統，能很短時間內加速到48m/min，三軸行程1020/610/610mm，力矩電機驅動B軸連續擺動銑頭0.001角度分割，旋轉範圍-30~120ﾟ，裝進口電機主軸26&32Kw / 124&154Nm / 18000RPM/HSK-A63設計及標準長工作台崁入φ610mm由力矩電機驅動的旋轉工作臺(C軸)，最大轉速50RPM承重500KG，搭配HEIDENHAIN TNC640，15”螢幕的五軸連動控制器，HEIDENHAIN高精度三軸光學尺，刀臂式60把刀，該加工中心用於多面高性能加工和最智能的加工概念提高了生產力。
KAO FONG MACHINERY CO., LTD.
製品の説明 :
5-axis synchronous machining of the KMU series can be used for multi-faceted processing of workpiece clamping positioning at one time or processing deep hole mold and inverted hook area.
Three-axis structure using box-type construction design, which can effectively improve the rigidity of the machine.
X / Y / Z axis with high rigidity roller type linear guideway, with high rigidity, fast moving, low wear and other characteristics, which can greatly enhance the processing dynamic precision and stability and effectively increase production efficiency.
CAMPRO PRECISION MACHINERY CO., LTD.
製品の説明 :
NV series provide more Y-axis and more working area to meet various demands.
Heavy-duty roller type linear guideways on 3 axes which provide integration of heavy cutting ability from box way and fast movement ability from linear guide way.
Z-axis servo motor with brake replaces counter-balance to provide optimal surface accuracy on 3D machining.
Pretensioned class C3 precision ballscrews on 3 axes help to eliminate blacklash.
Bearings with dust-protection device are assembled by 3 sets both in the front and rear.
One-piece column which designed with shoulder to support tool magazine to decrease vibration and increase the machine stability while tool changes.
Optional max. 4/5-axis table diameter allows more working area and less interference between cutting tools and workpieces.
