展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
REN AN INFORMATION TECHNOLOGY CO., LTD.
製品の説明 :
Realistic CNC Controller Function Panel, Modularized Machine Operation Panel, and Machine Simulation.
Excellent tool for CNC controller recognition and practicing tool offset.
YING HAN TECHNOLOGY CO., LTD.
製品の説明 :
5-AXIS VERTICAL MACHING CENTER BELONGS LINEAR WAYS ON THREE AXES, X, Y, Z -AXIS TRAVEL: 800x600x550mm, MEEHANITE CAST IRON IS TEMPERED FOR STRESS RELIEF TO ENSURE STRUCTURAL STABILITY WITHOUT DEFORMATION. REINFORCED COLUMN BASE GREATLY INCREASES STRUCTURAL STRENGTH AND WILL EXHIBIT ULTRA-HIGH STABILITY DURING HIGH SPEED OPERATION. WITH THE EQUIPMENT OF CNC TILTING ROTARY TABLE, THE MACHINE IS ABLE TO PERFORM 5-AXIS MACHINING, IT CAN MACHINE COMPLEX, MULTI-SIDED PARTS IN A SINGLE SETUP, THEREBY REDUCING SETUP TIME WHILE INCREASING PART ACCURACY.
REN AN INFORMATION TECHNOLOGY CO., LTD.
製品の説明 :
1. Production progress control
2. Finish time estimate
3. Cutting Feedrate Verify monitoring
4. Machine alarm notification
TAIWAN MACHINE TOOL CO., LTD.
製品の説明 :
TMT TG series with meticulous design, is your best choice in precision finishing. Multi-performance, while satisfy different machining demand. Work table can be mounted with APC, 5 Axes or fix table.
-High cutting rigidity with ganty type structure design.
-Compact design less floor occupation.
-Without carring ATC system on moving parts to make it lighter, make sure cutting without vibration.
- Cutting area isolation to ensure the transmission system life longer and easier to install linear scale.
-High efficiency servo drive ATC system, C-C(T1-T2)only 4sec., with high stable performance.
-ATC install at the center of basement to reduce the width of machine to save the walking steps to loading and unloading workpiece.
YEONG CHIN MACHINERY INDUSTRIES CO., LTD.
製品の説明 :
￭ The unique IDD spindle design provides power, speed, and stiffness required for the most adverse machining applications while providing long spindle life.
￭ Ceramic bearings help to minimize heat and provide thermal stability improving overall machining accuracy.
￭ High precision rotary encoders in the B and C
axes as a standard feature, allowing for the most demanding machining accuracies.
￭ ø650 mm table provides stable machining performance with a wide machining area and trunnion support.
HC FENG CO., LTD.
製品の説明 :
Replenishing Fluid automatically, accurate cutting fluid concentration. One equipment to multiple CNC machining centers. The supply line can be as long as 20 meters.
#Filtration by 3 filters #Sterilization by ozone # Oil-water mixer to precise mixing 0-10% cutting fluid #Stirring device avoid cutting fluid become stagnant water. #oil tank level meter for 50 gallon barrel low level detection.
YING HAN TECHNOLOGY CO., LTD.
製品の説明 :
YTL8320G
CNC computer lathe and portal robot arm
Machine features
- Automated process control
- Mass production of extremely precise workpieces
- Visual programming made easy
- Efficient process intelligence
Machine specifications
- 8-inch spindle chuck
- 45 degree slant back bed
- Z/X axis travel: 320/185mm
- Max. load of robotic arm is 4kg
- 10 station of storage capacity
QUASER MACHINE TOOLS, INC.
製品の説明 :
The MV1 series machines have a legendary history of high quality and proven performance, the New MV184 series has an even greater degree of reliability and performance. The design concepts of the new MV184 series combine advanced technology, performance and value for various machining applications.
Quaser produces this machine layout with the state-of-the-art digital design. Taking into consideration easy repair to reduce downtime. The MV184 series is the choice to increase part production.
WELE MECHATRONIC CO., LTD.
製品の説明 :
1.高剛性高穩定性結構
A. 底座：機器底座採用整體式鑄件，有效確保機器剛性。Z底座採4線軌設計，全行程範圍內直接落地支持，有絕佳的剛性及穩定性，確保整體長期幾何精度。
B. 滑座：滑座採用整體式鑄件，支撐於Z底座上，4線軌設計增加滑座負載剛性。
C. 立柱：立柱採用整體式鑄件，有效確保機器剛性；且固定不移動，大大減少主軸移動行程中所帶來的幾何精度誤差影響。
2. XYZ三軸及W軸導軌均採用先進的超重負荷型「滾柱」線性導軌，大幅度提高導軌「剛性」和「重切削能力」，也繼續保有「低摩擦力、低磨耗、低遲滯現象、低失位量、高速度、高精度、高動態特性、高壽命、不需調整」等線性導軌的優良特性。
3.XYZW四軸的均有過負載保護，如因誤操作造成撞機，可有效降低對機器的損傷。
4.雙編碼器回饋裝置（配置於XYZ三個進給軸)，B軸採用(圓光栅-角度編碼器) 廠牌：發格Fagor。
5.主軸箱等關鍵零件係利用「大型臥式搪孔機」及「大型高精度三次元量測儀（三座標量床）」確實達成應有的加工精度，確保優良的組裝基礎。
6.鞍頭：110主軸系統配備搪孔軸直徑110mm，搪孔軸行程W=500mm、3500 rpm(兩檔齒輪箱)。搪孔軸為氮化處理高硬度合金鋼件，前段支持使用傳統的硬化襯套外，後段附加線性導軌的加強支持，借助滾動低磨耗的特性，增長搪孔軸的精度壽命。
7.主軸前軸承採用直徑150mm的高精度主軸軸承，加上改良設計的軸承配置及潤滑設計，有效的提高主軸剛性和壽命。
8.主軸鬆刀採浮動式抓鬆刀裝置，鬆刀時不會施力於主軸軸承上，可長保主軸最佳精度；另，新式鬆刀缸配置設計，可使主軸於任一行程(W軸)位置換刀。
9.特殊設計的自動潤滑系統；潤滑油與切削液分開， 單獨收集可確保切削液的穩定性及工作環境的清潔。
10.刀庫採立柱側背式設計；刀庫與立柱接合，不同於落地型式，立柱固定不移動，刀庫與鞍頭配置可達成左右平衡架構，提高W軸動態穩定特性。
11.承襲歐美先進工具機廠的標準，以嚴格維護的「1.2米x1.2米」高精密度的方形標準平板做為精密度的基礎，對各項關鍵零件進行精密鏟花（刮研），使機器的各處結合面和滑動面均能達到正確的幾何精度，確保機器應有的精度和壽命。
12.採用的各項配套零組件均經過長期使用驗證，可確保機器長期運行的可靠性。
13.電氣箱採全密閉式循環熱交換系統，內部配線均參考德國工業安全標準，電源部份與訊號線區隔，以增加機器使用上的安全。
14.搭配高規格的Fanuc 0i MF Plus數控系統，標準功能包含：15吋彩色液晶螢幕、Fanuc全鍵式操作面板、1280米記憶容量、Ethernet網路接口、Flash記憶卡插口、Manual Guide i圖形對話式編程、剛性攻牙、手動剛性攻牙、AI contour control II等多項高規格功能，能經濟有效的滿足各種使用需求。
15.完整的品檢測試流程，搭配先進的自動光學直準儀、雷射干涉儀、球桿檢測儀、線上動平衡儀等精密檢測儀器，確保出廠的機器都能達到設計的性能和應有的功能。
16.經驗豐富的研發團隊，突破老舊的包袱，協助客戶達成各種特殊需求。
17.兼具經驗和熱誠的服務團隊和完整的服務體系，可以及時有效的讓用戶的機器長保最佳使用狀態。
CAMPRO PRECISION MACHINERY CO., LTD.
製品の説明 :
Campro manufactures a family of Double Column Machining with size up to 5,200 x 3,100 mm travels. The machines offer the highest accuracies of any bridge mill on the market and can machine large parts efficiently with its rigid design. The extended Y-axis has full supported and constructed with a base/bed casting. The PV-XX16 (1,600 mm travels on Y-axis) is one-piece monoblock column structure that is bolted to the bed, delivers rigidity and stability. The PV-xx21 and PV-xx26 have wider door span and bigger machining range, the optional 1,000 mm Z-axis travel is best for attached head requested user.
REN AN INFORMATION TECHNOLOGY CO., LTD.
製品の説明 :
Just like the real CNC machine, equipped with exactly same overall appearance, actual handwheel and real machine operation panel as numerical control machine.
Solving the difficulties of real machine: precise, complicated and very expensive.
With CNC Simulator, everyone can learn CNC machine operation and accumulate hands-on operation skills.
CNC training machine is equipped with exactly same overall appearance, actual handwheel and real machine
operation panel as numerical control machine. Its purpose is to train students for accumulating CNC machine operation skills (program transmission, programming, tool selection, tool compensation and alarm clear )
Overall design is more attractive, and it emphasizes on interaction to make students less mistakes happened.
Not only decreasing learning cost but also letting students work and learn in the safe environment.
VICTOR TAICHUNG MACHINERY WORKS CO., LTD.
製品の説明 :
．High rapid feed 48 m/min with roller type linear motion guideways for 3 axes.
．Trunnion type tilting table (B+C axes) fixed on machine base enhances structure stiffness.
．Backlash-less roller-cam drive mechanism rotated at higher speed further reduce the cycle time.
．BIG-PLUS BT-40 (BBT-40) spindle 12000rpm (15kW).
