展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
KING NICE TECH.CO., LTD.
製品の説明 :
It can effectively separate the slide oil,foreign matter oil,etc.on the surface of the water tank.Reduce the foul smell produced by the fusion of cutting fluid.
Reduce oil mist and liquid fly rafts causing grease on machinery and workpieces.Free from skin irritation and allergies.
No need to discharge,can reduce the amount of waste oil and wastewater treatment.
Reduce workpiece corrosion,rust,improve machining accuracy and extend tool life.
Purify cutting fluid to stabilize its quality,extend life and improve processing efficiency.
Filter impurities such as suspended solids to prevent backlash form affecting the surface of the motor and theworkpiece.
Stop theproduction of anaerobice bacteria and reduce the frequency of changing cutting fluid.
Reduce the failure rate of pipe and motor blockage.
Reduce labor costs and cleaning time for cutting fluids .Save processing costs for waste oil recovery.
YING HAN TECHNOLOGY CO., LTD.
製品の説明 :
5-AXIS VERTICAL MACHING CENTER BELONGS LINEAR WAYS ON THREE AXES, X, Y, Z -AXIS TRAVEL: 800x600x550mm, MEEHANITE CAST IRON IS TEMPERED FOR STRESS RELIEF TO ENSURE STRUCTURAL STABILITY WITHOUT DEFORMATION. REINFORCED COLUMN BASE GREATLY INCREASES STRUCTURAL STRENGTH AND WILL EXHIBIT ULTRA-HIGH STABILITY DURING HIGH SPEED OPERATION. WITH THE EQUIPMENT OF CNC TILTING ROTARY TABLE, THE MACHINE IS ABLE TO PERFORM 5-AXIS MACHINING, IT CAN MACHINE COMPLEX, MULTI-SIDED PARTS IN A SINGLE SETUP, THEREBY REDUCING SETUP TIME WHILE INCREASING PART ACCURACY.
LITZ HITECH CORP.
製品の説明 :
1. 堅強的龍門型結構設計，與U型底座<br />設計。<br />2. 高剛性的天車式設計。<br />3. Y軸雙伺服馬達與雙螺桿驅動。<br />4. A軸採內藏式，雙支撐雙驅動系統。<br />5. 高扭矩高精度的AC軸旋轉台。<br />6. 具備銑/車功能
HEAKE PRECISION TEC, CO., LTD.
製品の説明 :
All models use three-axis roller linear guide and three-axis screw hollow oil cooling. The Z axis uses a double pneumatic cylinder counterweight to achieve horizontal, smooth, high-speed response and high-speed movement.
YIDA PRECISION MACHINERY CO., LTD.
製品の説明 :
1. T structure bed with high-quality cast-iron frame for enhanced rigidity and stability.
2. Extremely rigid mobile column with linear guide ways ensures stability and cutting accuracy while allowing rapid traverse of the X, Y and Z axes.
3. High rigidity roller type linear guideways, rugged massive linear guideways on X, Y and Z axes maintain precision and ensure a rapid traverse rate.
YIDA PRECISION MACHINERY CO., LTD.
製品の説明 :
The five-axis machining centers is suitable for high-efficiency, high-precision complex curved surface processing.
The characteristics of precise processing of complex workpieces and diversified manufacturing needs can be completed by fixing them in one setup.
The MV-500 shortens production working hours, improved the processing accuracy of complex parts to meet diversified needs, greatly saves on mold costs, and improves production efficiency and market competition.
CAMPRO PRECISION MACHINERY CO., LTD.
製品の説明 :
Campro manufactures a family of Double Column Machining with size up to 5,200 x 3,100 mm travels. The machines offer the highest accuracies of any bridge mill on the market and can machine large parts efficiently with its rigid design. The extended Y-axis has full supported and constructed with a base/bed casting. The PV-XX16 (1,600 mm travels on Y-axis) is one-piece monoblock column structure that is bolted to the bed, delivers rigidity and stability. The PV-xx21 and PV-xx26 have wider door span and bigger machining range, the optional 1,000 mm Z-axis travel is best for attached head requested user.
HAWE Hydraulik Singapore Pte. Ltd. Taiwan Branch
製品の説明 :
Compact hydraulic power packs are a type of hydraulic power pack. They arecharacterised by a highly compact design, since the motor shaft of the electric drive also acts as the pump shaft. Compact hydraulic power packs are designed to supply hydraulic circuits with hydraulic fluid.
The compact hydraulic power pack type INKA consists of the tank, the integrated motor and the radial piston pump or gear pump directly attached to the motor
shaft. The directly mounted electronic communication box with integrated realtime operating system allows the operating state to be recorded and visualised. The
measured values of the integrated multi-sensor (including the motor speed) can be passed on to the higher-level machine controls via standardised interfaces and processed there.
The consistently modular design of the type INKA means that different usage volumes and delivery flows can be realised quickly and easily from the modular
system. Compatible, ready-for-connection, complete solutions can be assembled easily using a wide range of connection blocks and the valve banks that can be combined with them.
Features and benefits
■ Prepared for condition monitoring with integrated sensors and communication box
■ Optimum efficiency through under-oil motor cooling, direct power transmission,and sophisticated heat dissipation
■ Suitable for nominal operating modes S2 (short period operation) and S3 (periodic intermittent operation)
■ Resource-saving due to small oil filling volume
Intended applications
■ Machine tools and material testing
■ Hydraulic tools
■ Handling systems
■ Presses and processing machines
GENTIGER MACHINERY INDUSTRIAL CO., LTD.
製品の説明 :
• Closed-type double-column structure, it increases structure dramatically increases the structural rigidity of the machine and maintains extraordinary stability at all times.
• Roller-type linear guideway on three axes, it achieves high loading resistance, high rigidity, long service life, low thermal growth, and low noise.
• Three linear guideways on the Y axis, it provides more stable support for the spindle head, which contributes to upgraded stability in machining.
• The 45° vertical horizontal swiveling head is applicable for both vertical and horizontal machining, increasing flexibility in machining applications.
VISION WIDE TECH CO., LTD.
製品の説明 :
One of the proudest products of Vision Wide which fulfills automatic 5-face machining with super rigidity structure and high positioning accuracy. HF satisfies demands in mold surface cutting, angle cutting, 3D mold cutting, and precise contour finishing.
INNOSERV FA INC. TAIWAN BRANCH (BVI)
製品の説明 :
Micro Dynamics Vertical Machining Center Line opens a new era in multi-purpose and versatile machining centers. Compact, durable, powerful, strong and accurate, the MEGA/TERA Series starts a revolution in the market: the smallest C-frame machines provide powerful and precise results for manufacturers of dies and molds, aerospace, automotive, semi-conductor, job shops and general machine sectors.
The MEGA/TERA Series has been designed with the latest in technology being utilized throughout the machine with productivity in mind. From its EtherNet/IP architecture for easy automation and integration into systems and cells, to its Motion Control for fast and smooth operations used in all industries, the MEGA/TERA Series has quickly become one of the industries leading machine tool lines of Vertical Machining Centers.
The MEGA/TERA Series has been refined through years of research and development of new technologies that greatly enhance the machines for the rigors of the Mold and Die industry.
All series are equipped with
■ 15,000 rpm Built-In Spindle
■ Thermal Compensation (DYPEC)
■ Micro Dynamics HMI
