展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
YEONG CHIN MACHINERY INDUSTRIES CO., LTD.
製品の説明 :
Most Popular High Performance NSV106AS is well suited for superior surface finishing works, specially in automotive, job shop and electronics industries. ￭ Large delta machine column and base ensure the highest stability during high speed movement￭ High precision roller type guideways on all 3 axes￭ High precision linear guideway with 6 slide blocks on X-axis￭ High performance YCM in-house designed spindle with low vibration to achieve excellent finish
TONGTAI MACHINE & TOOL CO., LTD.
製品の説明 :
‧HTT-500, the 5-axis horizontal machining center, is Tongtai's new solution of process integration which will definitely meet the demands on high-mix low-volume manufacturing.
‧Excellent machine rigidity and stability to ensure high accuracy during precision machining.
‧Orthogonal mechanical coordinate system for easy programming and enhance the precision and efficiency of machining.
‧Central chip removal system effectively prevents the problem of internal temperature rise from accumulated cutting chips and reduces the environmental variables for higher precision.
‧Equipped with APC (auto pallet changer) system to shorten the machine idle time.
‧Built-in thermal compensation function to ensure ideal machining accuracy under different temperature conditions.
WELE MECHATRONIC CO., LTD.
製品の説明 :
1.高剛性高穩定性結構
A. 底座：機器底座採用整體式鑄件，有效確保機器剛性。Z底座採4線軌設計，全行程範圍內直接落地支持，有絕佳的剛性及穩定性，確保整體長期幾何精度。
B. 滑座：滑座採用整體式鑄件，支撐於Z底座上，4線軌設計增加滑座負載剛性。
C. 立柱：立柱採用整體式鑄件，有效確保機器剛性；且固定不移動，大大減少主軸移動行程中所帶來的幾何精度誤差影響。
2. XYZ三軸及W軸導軌均採用先進的超重負荷型「滾柱」線性導軌，大幅度提高導軌「剛性」和「重切削能力」，也繼續保有「低摩擦力、低磨耗、低遲滯現象、低失位量、高速度、高精度、高動態特性、高壽命、不需調整」等線性導軌的優良特性。
3.XYZW四軸的均有過負載保護，如因誤操作造成撞機，可有效降低對機器的損傷。
4.雙編碼器回饋裝置（配置於XYZ三個進給軸)，B軸採用(圓光栅-角度編碼器) 廠牌：發格Fagor。
5.主軸箱等關鍵零件係利用「大型臥式搪孔機」及「大型高精度三次元量測儀（三座標量床）」確實達成應有的加工精度，確保優良的組裝基礎。
6.鞍頭：110主軸系統配備搪孔軸直徑110mm，搪孔軸行程W=500mm、3500 rpm(兩檔齒輪箱)。搪孔軸為氮化處理高硬度合金鋼件，前段支持使用傳統的硬化襯套外，後段附加線性導軌的加強支持，借助滾動低磨耗的特性，增長搪孔軸的精度壽命。
7.主軸前軸承採用直徑150mm的高精度主軸軸承，加上改良設計的軸承配置及潤滑設計，有效的提高主軸剛性和壽命。
8.主軸鬆刀採浮動式抓鬆刀裝置，鬆刀時不會施力於主軸軸承上，可長保主軸最佳精度；另，新式鬆刀缸配置設計，可使主軸於任一行程(W軸)位置換刀。
9.特殊設計的自動潤滑系統；潤滑油與切削液分開， 單獨收集可確保切削液的穩定性及工作環境的清潔。
10.刀庫採立柱側背式設計；刀庫與立柱接合，不同於落地型式，立柱固定不移動，刀庫與鞍頭配置可達成左右平衡架構，提高W軸動態穩定特性。
11.承襲歐美先進工具機廠的標準，以嚴格維護的「1.2米x1.2米」高精密度的方形標準平板做為精密度的基礎，對各項關鍵零件進行精密鏟花（刮研），使機器的各處結合面和滑動面均能達到正確的幾何精度，確保機器應有的精度和壽命。
12.採用的各項配套零組件均經過長期使用驗證，可確保機器長期運行的可靠性。
13.電氣箱採全密閉式循環熱交換系統，內部配線均參考德國工業安全標準，電源部份與訊號線區隔，以增加機器使用上的安全。
14.搭配高規格的Fanuc 0i MF Plus數控系統，標準功能包含：15吋彩色液晶螢幕、Fanuc全鍵式操作面板、1280米記憶容量、Ethernet網路接口、Flash記憶卡插口、Manual Guide i圖形對話式編程、剛性攻牙、手動剛性攻牙、AI contour control II等多項高規格功能，能經濟有效的滿足各種使用需求。
15.完整的品檢測試流程，搭配先進的自動光學直準儀、雷射干涉儀、球桿檢測儀、線上動平衡儀等精密檢測儀器，確保出廠的機器都能達到設計的性能和應有的功能。
16.經驗豐富的研發團隊，突破老舊的包袱，協助客戶達成各種特殊需求。
17.兼具經驗和熱誠的服務團隊和完整的服務體系，可以及時有效的讓用戶的機器長保最佳使用狀態。
REN AN INFORMATION TECHNOLOGY CO., LTD.
製品の説明 :
Guided-steps CAD/CAM with Machining Simulation including tool path verification and machining time.
Excellent tool for learning CAD/CAM and verifying with simulation.
YEONG CHIN MACHINERY INDUSTRIES CO., LTD.
製品の説明 :
NFX400A is designed especially for small, complex high-quality parts mainly for aerospace, automotive, medical, job shop and die & mold applications
￭ Extra wide column and base design to ensure best support and cutting rigidity.
￭ Increased tool life by cutting with belly and edge of the tool
￭ Reduce fixture error and improve workpiece loading and uploading time
￭ Greatly reduced non-cutting or setup waiting time
￭ Saves manufacturing cost with reduced fixture and electrode costs.
HAWE Hydraulik Singapore Pte. Ltd. Taiwan Branch
製品の説明 :
Compact hydraulic power packs are a type of hydraulic power pack. They arecharacterised by a highly compact design, since the motor shaft of the electric drive also acts as the pump shaft. Compact hydraulic power packs are designed to supply hydraulic circuits with hydraulic fluid.
The compact hydraulic power pack type INKA consists of the tank, the integrated motor and the radial piston pump or gear pump directly attached to the motor
shaft. The directly mounted electronic communication box with integrated realtime operating system allows the operating state to be recorded and visualised. The
measured values of the integrated multi-sensor (including the motor speed) can be passed on to the higher-level machine controls via standardised interfaces and processed there.
The consistently modular design of the type INKA means that different usage volumes and delivery flows can be realised quickly and easily from the modular
system. Compatible, ready-for-connection, complete solutions can be assembled easily using a wide range of connection blocks and the valve banks that can be combined with them.
Features and benefits
■ Prepared for condition monitoring with integrated sensors and communication box
■ Optimum efficiency through under-oil motor cooling, direct power transmission,and sophisticated heat dissipation
■ Suitable for nominal operating modes S2 (short period operation) and S3 (periodic intermittent operation)
■ Resource-saving due to small oil filling volume
Intended applications
■ Machine tools and material testing
■ Hydraulic tools
■ Handling systems
■ Presses and processing machines
YING HAN TECHNOLOGY CO., LTD.
製品の説明 :
5-AXIS VERTICAL MACHING CENTER BELONGS LINEAR WAYS ON THREE AXES, X, Y, Z -AXIS TRAVEL: 800x600x550mm, MEEHANITE CAST IRON IS TEMPERED FOR STRESS RELIEF TO ENSURE STRUCTURAL STABILITY WITHOUT DEFORMATION. REINFORCED COLUMN BASE GREATLY INCREASES STRUCTURAL STRENGTH AND WILL EXHIBIT ULTRA-HIGH STABILITY DURING HIGH SPEED OPERATION. WITH THE EQUIPMENT OF CNC TILTING ROTARY TABLE, THE MACHINE IS ABLE TO PERFORM 5-AXIS MACHINING, IT CAN MACHINE COMPLEX, MULTI-SIDED PARTS IN A SINGLE SETUP, THEREBY REDUCING SETUP TIME WHILE INCREASING PART ACCURACY.
KAO FONG MACHINERY CO., LTD.
製品の説明 :
This series is the fix-column bridge type machining center which adopts fixed crossbeam and column, but moveable table . X and Y axes use the roller type linear guide way, and Z axis offers box way or linear guide way according to customer’s needs. In addition, it can be equipped with various types of manual attaching head (90 degrees milling head, universal head,extension head, multi-directional head etc.). Applicable to all kinds of parts processing, mold mold processing, aluminum parts and aerospace transportation parts processing industry etc.
INNOSERV FA INC. TAIWAN BRANCH (BVI)
製品の説明 :
Micro Dynamics Vertical Machining Center Line opens a new era in multi-purpose and versatile machining centers. Compact, durable, powerful, strong and accurate, the MEGA/TERA Series starts a revolution in the market: the smallest C-frame machines provide powerful and precise results for manufacturers of dies and molds, aerospace, automotive, semi-conductor, job shops and general machine sectors.
The MEGA/TERA Series has been designed with the latest in technology being utilized throughout the machine with productivity in mind. From its EtherNet/IP architecture for easy automation and integration into systems and cells, to its Motion Control for fast and smooth operations used in all industries, the MEGA/TERA Series has quickly become one of the industries leading machine tool lines of Vertical Machining Centers.
The MEGA/TERA Series has been refined through years of research and development of new technologies that greatly enhance the machines for the rigors of the Mold and Die industry.
All series are equipped with
■ 15,000 rpm Built-In Spindle
■ Thermal Compensation (DYPEC)
■ Micro Dynamics HMI
FAIR FRIEND ENTERPRISE CO., LTD.
製品の説明 :
★Gantry type structure
- Designed with a gantry type structure, the Feeler U800-5AX 5-axis machining center has the feature of spacious machining space, allowing large workpiece to be loaded and unloaded with ease. It is also convenient for operator to check the current machining condition at any time.
★U-shaped construction of base and column
-The advanced U-Shape structure significantly increases structural rigidity and machining accuracy.
-X.Y.Z axis rapid traverse rate reach 48m/min.
- Suitable for equipping with a large diameter of rotary table.
★Three axes overlap and separated from two rotary axes
- This design avoids a distance between the machining point and the intersection point of two rotating axes.
- Easy to compensate for the errors of radius on rotating axes and movement on three linear axes to ensure the machine's stability and accuracy.
★Separated design for three axes moving area and machining area
- This design feature not only makes chip removal more convenient, but also enables better chip-prevention capability of the machine.
- The rotaary shaft speed is increased by 800 rpm, which makes the turntable have a high-speed turning function.
SHE HONG INDUSTRIAL CO., LTD.
製品の説明 :
Intelligent, Specialized in heavy duty cutting
Optimum stability & High rigidity of 3-axes box guideway model
+One of Major 6 Brands of Self-Made NC Controllers Taiwan One and Only Hartrol Premium Controller
+AI intelligent technology Automatic tuning parameter maintains accuracy
+For box guideway model, 50% Quadrant Error reduced and 30% reduction in backlash error
+25% wider width, 15% rigidity increased
+15% ~ 20% machining efficiency better than peers
+30% accuracy better than peers with full stroke support of saddle design, which ensures structure stability and durability
