展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
DKSH Taiwan Ltd.
製品の説明 :
The PC R series evaporators have a heating system based on a heat pump and operate under vacuum at 5kPa and around 30°C (86°F).
Heat exchange occurs within a conical jacket, and the boiling chamber inside part is cleaned by internal scrapers that continuously stir concentrate. This configuration is designed to produce a concentrate with a high final concentration and a distillate with low conductivity.
•From 0,1 to 2 m3/day – 0.02 to 0.37 US gpm of distillate
•Dramatic reduction of volumes and disposal costs
•Matter recovery
Extremely suitable when:
•the wastewater has a high initial content of dissolved or suspended solids
•the wastewater is already pre-concentrated
•the daily volumes are relatively small
•the distillate has to be of the highest quality
•the concentrate has to be recycled
DKSH Taiwan Ltd.
製品の説明 :
EVALED® RV F is the line of mechanical recompression evaporators designed to reach the highest level of reliability in heat transfer, with minimum impact in terms of fouling and scaling.
High efficiency forced circulation shell & tube heat exchanger with horizontal tubes allows wastewater concentration up to the salts solubility limits and to manage also suspended crystals.
Wastewater is constantly treated: the distillate and the concentrate are continuously separated and then simply discharged through a pump. Heat is recovered by cooling the two outlet streams using the inlet effluent.
Available in different materials to treat different effluents containing dissolved salty, organic compounds and even the most aggressive salted wastewater (high chlorides content), produced by various industries.
The MVR is the lowest energy consumption evaporation technology.
• Maximum water recovery;
• Effective reduction of waste to be disposed of;
• Modular and flexible;
• Intuitive HMI;
• Plug & play;
• Minimum labour.
G-TECH INSTRUMENTS INC.
製品の説明 :
A rotor that does not perform dynamic balance correction may produce unnecessary vibrations and thus reduce the productivity of the machine, as well as damage to the bearings. At the same time, it may cause damage to the outer frame or supporting device and foundation during severe movement.
G-Tech HJ-4250S-A Hard Bearing Balancing Machine is applicable for tool machine spindles, high-speed built-in spindles, motor rotors / motors, rollers, fans, centerless grinding wheels.
A maximum rotor weight of 500kg, a maximum rotor diameter of 1 meter, and measurement accuracy at low speed dynamic balance is 0.5gram-mm(max), and the can be 0.05gram-mm(max) at high-speed dynamic balance.
ICOP Technology Inc.
製品の説明 :
The QEC-M series is an EtherCAT master that uses a dual-core, independently operating DM&P Vortex86EX2 processor for real-time, reliable synchronous EtherCAT control. The master core of the processor serves as the Arduino development environment; the slave core of the processor serves as the Real-time EtherCAT master. The two cores exchange data via Inter-Processors Communications (IPC).
SUNG YANG MACHINERY CORPORATION
製品の説明 :
SAN YUAN Electrical Chain Hoist Large Capacity
SIMPLY THE BEST HOISTS ON THE MARKET !!
●A secondary mechanical load brake is an additional features on ER3 models only.
●ER3 type Electric Chain Hoists & overhead crane.
●Provide more stable and smooth operation and reduce the shaking of the lifting weight!!
●The "double safety mechanism" clutch and upper and lower limit switches are used to ensure safe operation!!
●Tough body is made by Die-Cast Aluminum to keep dimension precision & outlook smooth..
●IP55 Enclosure Dust-protected and jet protected.
●Torque limiter-high transmission efficiency, quiet
It has a wide range of applications, including manufacturing, handling, storage, and engineering construction of various industrial hoisting, lifting, and lifting equipment.
STAND TOOLS ENTERPRISE CO., LTD.
製品の説明 :
◎Release magnetic sweeper has a magnetic device which enables to attract any metal items and spare parts laying on the ground without picking them up one by one
◎Pull the trigger to release magnetic force
◎Easy to use, safe and practical time saving device
◎Permanent magnet
TANKO ENTERPRISE CO., LTD
製品の説明 :
► Top tray for CNC tools
► 4"x2" PU casters with total 1000kg loading capacity
► T represents T drawer
► Normal Drawer: 90% extension with 100kg loading capacity
► T Drawer: 100% extension with 200kg loading capacity
► Drawer front height lower than 200mm with standard dividers
► Drawer front height over 300mm with CNC tools holder tray
► Full length aluminum handles with patented safety lock system
► Interlock system
