展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
DKSH Taiwan Ltd.
製品の説明 :
The PC R series evaporators have a heating system based on a heat pump and operate under vacuum at 5kPa and around 30°C (86°F).
Heat exchange occurs within a conical jacket, and the boiling chamber inside part is cleaned by internal scrapers that continuously stir concentrate. This configuration is designed to produce a concentrate with a high final concentration and a distillate with low conductivity.
•From 0,1 to 2 m3/day – 0.02 to 0.37 US gpm of distillate
•Dramatic reduction of volumes and disposal costs
•Matter recovery
Extremely suitable when:
•the wastewater has a high initial content of dissolved or suspended solids
•the wastewater is already pre-concentrated
•the daily volumes are relatively small
•the distillate has to be of the highest quality
•the concentrate has to be recycled
G-TECH INSTRUMENTS INC.
製品の説明 :
A rotor that does not perform dynamic balance correction may produce unnecessary vibrations and thus reduce the productivity of the machine, as well as damage to the bearings. At the same time, it may cause damage to the outer frame or supporting device and foundation during severe movement.
G-Tech HJ-4250S-A Hard Bearing Balancing Machine is applicable for tool machine spindles, high-speed built-in spindles, motor rotors / motors, rollers, fans, centerless grinding wheels.
A maximum rotor weight of 500kg, a maximum rotor diameter of 1 meter, and measurement accuracy at low speed dynamic balance is 0.5gram-mm(max), and the can be 0.05gram-mm(max) at high-speed dynamic balance.
G-TECH INSTRUMENTS INC.
製品の説明 :
The performance of the spindle is an important key to processing quality. When you understand the performance of the spindle, you can predict and control the quality of the processed parts. The shape accuracy, roundness, and surface roughness of the workpieces are all related to the performance of the spindle. Only when the spindle is real measuring the accuracy of the spindle at the processing speed of the machine has meaning to the control of the quality of the processed parts, so measuring and understanding the performance of the machine tool, finding the best working speed, determining the warm-up time, even confirm the accuracy of the spindle after the collision.
LION provided this SEA analysis system as early as 1993 to help spindle manufacturers, machine tool factories and processing plants to reduce workpiece defect rate and improve product quality.
★The SEA system complies with the following international standards:
✓ ANSI / ASME B5.54-2005: "Methods for Performance Evaluation of CNC Machining Centers"
✓ ISO230: Test Code for Machine Tools, 3: "Determination of Thermal Effects" 7: "Geometric Accuracy of Axes of Rotation"
✓ ANSI / ASME B5.57-1998: "Methods for Performance Evaluation of CNC Turning Centers"
✓ ANSI / ASME B89.3.4: "Axes of Rotation, Methods for Specifying and Testing"
DKSH Taiwan Ltd.
製品の説明 :
EVALED® RV F is the line of mechanical recompression evaporators designed to reach the highest level of reliability in heat transfer, with minimum impact in terms of fouling and scaling.
High efficiency forced circulation shell & tube heat exchanger with horizontal tubes allows wastewater concentration up to the salts solubility limits and to manage also suspended crystals.
Wastewater is constantly treated: the distillate and the concentrate are continuously separated and then simply discharged through a pump. Heat is recovered by cooling the two outlet streams using the inlet effluent.
Available in different materials to treat different effluents containing dissolved salty, organic compounds and even the most aggressive salted wastewater (high chlorides content), produced by various industries.
The MVR is the lowest energy consumption evaporation technology.
• Maximum water recovery;
• Effective reduction of waste to be disposed of;
• Modular and flexible;
• Intuitive HMI;
• Plug & play;
• Minimum labour.
ICOP Technology Inc.
製品の説明 :
The QEC-M series is an EtherCAT master that uses a dual-core, independently operating DM&P Vortex86EX2 processor for real-time, reliable synchronous EtherCAT control. The master core of the processor serves as the Arduino development environment; the slave core of the processor serves as the Real-time EtherCAT master. The two cores exchange data via Inter-Processors Communications (IPC).
SUNG YANG MACHINERY CORPORATION
製品の説明 :
SAN YUAN Double Rail Wire Rope Hoist (Two Speed)
Three yuan double-track two-speed electric steel cable crane speed ratio
6 : 1 & 10 : 1.
The two-motor two-speed electric crane is designed as follows:
the fast/slow speed motor and the fast/slow speed brake are independent, and the fast/slow speed switching is performed by the clutch mode.
SUNG YANG MACHINERY CORPORATION
製品の説明 :
SAN YUAN Electrical Chain Hoist Large Capacity
SIMPLY THE BEST HOISTS ON THE MARKET !!
●A secondary mechanical load brake is an additional features on ER3 models only.
●ER3 type Electric Chain Hoists & overhead crane.
●Provide more stable and smooth operation and reduce the shaking of the lifting weight!!
●The "double safety mechanism" clutch and upper and lower limit switches are used to ensure safe operation!!
●Tough body is made by Die-Cast Aluminum to keep dimension precision & outlook smooth..
●IP55 Enclosure Dust-protected and jet protected.
●Torque limiter-high transmission efficiency, quiet
It has a wide range of applications, including manufacturing, handling, storage, and engineering construction of various industrial hoisting, lifting, and lifting equipment.
G-TECH INSTRUMENTS INC.
製品の説明 :
To reduce damages caused by accidental collision, and to record collision events.
✓ Smart monitoring box consisting of sensors & electronics
✓ High bandwidth MEMS tri-axial accelerometer (X, Y & Z)
✓ Relay triggered in less than 1 millisecond upon a collision
✓ Built-in data log for max. 5,000 collision events
✓ Easy installation on machine structure
✓ Easy software for threshold setting & logging
✓ Economically priced
