展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
STAND TOOLS ENTERPRISE CO., LTD.
製品の説明 :
◎Release magnetic sweeper has a magnetic device which enables to attract any metal items and spare parts laying on the ground without picking them up one by one
◎Pull the trigger to release magnetic force
◎Easy to use, safe and practical time saving device
◎Permanent magnet
DKSH Taiwan Ltd.
製品の説明 :
PC F series is designed to produce maximum distillate quality with minimum capital and operating costs. Each model is a compact skid-mounted unit, simple, safe and easy to move. Control is by a PLC, including the functions of feed and discharge, therefore allowing automatic operation and minimum supervision. All models are designed for continuous operation, 24h/day, and require just electrical supply and compressed air.
PC F series evaporators operate in a high vacuum condition, with the boiling chamber pressure set at 5-6 kPa (absolute vacuum), in order to save the thermal energy produced by the heat pump. In this way the boiling temperature of the wastewater is approximately 40°C (104°F) and typical phenomena (scaling, precipitation, corrosion) which may reduce the performance are either eliminated or considerably reduced.
From 0,7 to 24 m3/day – 0.13 – 4.4 US gpm of distillate
Dramatic reduction of volumes and disposal costs
Water reuse and matter recovery
ICOP Technology Inc.
製品の説明 :
The QEC-M series is an EtherCAT master that uses a dual-core, independently operating DM&P Vortex86EX2 processor for real-time, reliable synchronous EtherCAT control. The master core of the processor serves as the Arduino development environment; the slave core of the processor serves as the Real-time EtherCAT master. The two cores exchange data via Inter-Processors Communications (IPC).
G-TECH INSTRUMENTS INC.
製品の説明 :
A rotor that does not perform dynamic balance correction may produce unnecessary vibrations and thus reduce the productivity of the machine, as well as damage to the bearings. At the same time, it may cause damage to the outer frame or supporting device and foundation during severe movement.
G-Tech HJ-4250S-A Hard Bearing Balancing Machine is applicable for tool machine spindles, high-speed built-in spindles, motor rotors / motors, rollers, fans, centerless grinding wheels.
A maximum rotor weight of 500kg, a maximum rotor diameter of 1 meter, and measurement accuracy at low speed dynamic balance is 0.5gram-mm(max), and the can be 0.05gram-mm(max) at high-speed dynamic balance.
EQP SERIES CO., LTD
製品の説明 :
任何人都可以輕鬆測量振動。 實現超小型、簡單、實用、快速的測量。
手持式便攜型振動計。
Hi/Lo 靈敏度切換，可以進行較寬範圍之測量
加速度測量範圍為0.01m/s2 至199.9m/s2
速度測量範圍為0.01mm/s 至199.9mm/s
位移測量範圍為0.001 至19.99mm(P-P）
使用兩節 AA 鹼性電池，可連續使用 30 小時以上。
所有附件（如觸針、磁鐵、安裝螺釘和手提箱）均作為標準配置提供。
它符合振動烈度測量設備標準JIS B 0907，能夠確定旋轉機械等的質量。
通過各種擴展選項可以進行振動波形記錄和頻率分析。
符合歐洲CE規範之產品。
DKSH Taiwan Ltd.
製品の説明 :
EVALED® RV F is the line of mechanical recompression evaporators designed to reach the highest level of reliability in heat transfer, with minimum impact in terms of fouling and scaling.
High efficiency forced circulation shell & tube heat exchanger with horizontal tubes allows wastewater concentration up to the salts solubility limits and to manage also suspended crystals.
Wastewater is constantly treated: the distillate and the concentrate are continuously separated and then simply discharged through a pump. Heat is recovered by cooling the two outlet streams using the inlet effluent.
Available in different materials to treat different effluents containing dissolved salty, organic compounds and even the most aggressive salted wastewater (high chlorides content), produced by various industries.
The MVR is the lowest energy consumption evaporation technology.
• Maximum water recovery;
• Effective reduction of waste to be disposed of;
• Modular and flexible;
• Intuitive HMI;
• Plug & play;
• Minimum labour.
DKSH Taiwan Ltd.
製品の説明 :
The PC R series evaporators have a heating system based on a heat pump and operate under vacuum at 5kPa and around 30°C (86°F).
Heat exchange occurs within a conical jacket, and the boiling chamber inside part is cleaned by internal scrapers that continuously stir concentrate. This configuration is designed to produce a concentrate with a high final concentration and a distillate with low conductivity.
•From 0,1 to 2 m3/day – 0.02 to 0.37 US gpm of distillate
•Dramatic reduction of volumes and disposal costs
•Matter recovery
Extremely suitable when:
•the wastewater has a high initial content of dissolved or suspended solids
•the wastewater is already pre-concentrated
•the daily volumes are relatively small
•the distillate has to be of the highest quality
•the concentrate has to be recycled
