展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
G-TECH INSTRUMENTS INC.
製品の説明 :
A rotor that does not perform dynamic balance correction may produce unnecessary vibrations and thus reduce the productivity of the machine, as well as damage to the bearings. At the same time, it may cause damage to the outer frame or supporting device and foundation during severe movement.
G-Tech HJ-4250S-A Hard Bearing Balancing Machine is applicable for tool machine spindles, high-speed built-in spindles, motor rotors / motors, rollers, fans, centerless grinding wheels.
A maximum rotor weight of 500kg, a maximum rotor diameter of 1 meter, and measurement accuracy at low speed dynamic balance is 0.5gram-mm(max), and the can be 0.05gram-mm(max) at high-speed dynamic balance.
EQP SERIES CO., LTD
製品の説明 :
Voltage Sensitivity: 10mV/(m/s²)±10%
Power Supply: DC15～36V
Constant Current: 0.5～10mA
Resonant Frequency: Approximately 40kHz
Frequency Response: 5～10kHz (±3dB)
Maximum Acceleration: 220m/s²
Shock Resistance: 49,000m/s²
Noise Level: Below 100μVRMS
Operating Temperature Range: -50～110℃
Detection Structure: Shear Type
Case Material: Titanium
Mass: Approximately 10g
FARSIGHT PRECISION CO., LTD.
製品の説明 :
Finished leaking testing just only 1 minute !!!
Leaking Testing Machine (Pressure testing machine)
◎ Our company could according to products request of
condition of client, design and manufacturing dry type,
wet type or dry-wet 2 ways in one leaking testing
machine.
◎ 2 workpiece finished at the same time.
◎ The client can select the "COSMO", "FUKUDA" or other
leaking testing instrument, and install user-interface
system.
◎ Attach computer storage, calculation and network output
etc...
◎ The equipment could exchange the workpiece quickly.
◎ The equipment could exchange fixtures for other
workpiece.
◎ It can set the water tank in time.
◎ The client can option to mark on workpiece with laser or
punching.
LASER APPLICATION TECHNOLOGY CO., LTD.
製品の説明 :
◎ Tool Length Measurement
◎ Tool Radius Measurement
◎ Tool Breakage Detection
◎ Spindle Runout Analysis
◎ Three Axes Backlash Analysis
◎ Spindle Inclination Analysis
◎ Online Thermal Displacement Automatic Modeling and Compensation
LASER APPLICATION TECHNOLOGY CO., LTD.
製品の説明 :
◎ Repeatability: < 1μm (2σ)
◎ Low triggering force
◎ Short triggering distance, approximately 0.1mm
◎ Fast single measurement speed, less than 8 seconds
Taiwan Auto-Design Co.
製品の説明 :
Polytec 3D Scanning Vibrometers are state-of-the-art
for noise and vibration measurement in research and
development. Using three independent scanning
heads they deliver the full information on all vibrational
directions. The PSV-500-3D determines operational
deflection shapes and Eigenmodes for NVH, acoustics,
structural dynamics, ultrasonics, and FEM validation.
The high frequency version up to 25 MHz extends the
application range to non-destructive evaluation (NDE)
research. Every PSV-500-3D integrates perfectly into the CAE world providing interfaces to 3D geometries,
modal analysis and automation. The scanning heads
based on helium-neon laser allow measurements
even on tiny structures due to their especially small
laser spot.
PSV Scanning Vibrometers are available as
a compact laptop version or as a practical rack-type
workstation.
DA CEI TRADE CO.,LTD.
製品の説明 :
Low pressure loss! Low cost! Light!
Compressor and high pressure blower are unnecessary!
Air-speed 100m/s can be discharged by the turbo-blower.
LNC TECHNOLOGY CO., LTD.
製品の説明 :
‧Low profile, high performance, easy installation, high applicability
‧High sensitivity, high precision
‧measurement:±16G, extremely low signal /noise ratio
‧XYZ three-axis vibration detection
‧Measuring frequency 3.32kHz(max.)
‧EtherCAT protocol
‧Water and oil proof, great anti-interference ability
‧Support time domain graph, frequency domain graph, abnormal vibration section marking of program function
‧Support smart function development: Broken tool detection, abnormal vibration detection, spindle protection, tool wear, adjustment assistance, equipment health inspection, etc.
USYNC INC.
製品の説明 :
心得科技整合機械手臂、客製化料台、量測站與量測軟體，打造自動化機台，解決人力工時、工件品質保障、加工產能等製程問題，大幅提升加工機附加價值和競爭力。
量測站提高工件品質，並有效控制良率，不受外部環境與人員失誤影響，是自動化產線不可或缺的環節。
DA CEI TRADE CO.,LTD.
製品の説明 :
* Electric heater for generating the high temp. hot-air of the hige pressure.
* Temp. control can be be satisfactory because A-sensor (for detecting the hot-air of the outlet) and B-sensor (for
detecting the hot-star and overheat temp. ) is incorporated.
* Life of the heater element becomes long and the high temp. hot-air of 800ﾟC can be used the long time stably by using
with Multi-controller TRC202.
* Hot-start operation for intermittent operation is possible by using with Multi-controller TRC202.
