展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
APACER TECHNOLOGY INC.
製品の説明 :
結合各大廠牌光學量測儀器與機械手臂，輔以高度客製化軟體，實現高精度之多點、多角度光學量測，可滿足所有面板、背光模組或LCM模組等光學量測需求。
瞭解更多：https://iiot.apacer.com/tw/optical-inspection/ai-aoi-automation/
更多實績案例，歡迎參考Apacer宇瞻智慧物聯官網：https://iiot.apacer.com/tw/case-studies/
EQP SERIES CO., LTD
製品の説明 :
Voltage Sensitivity: 10mV/(m/s²)±10%
Power Supply: DC15～36V
Constant Current: 0.5～10mA
Resonant Frequency: Approximately 40kHz
Frequency Response: 5～10kHz (±3dB)
Maximum Acceleration: 220m/s²
Shock Resistance: 49,000m/s²
Noise Level: Below 100μVRMS
Operating Temperature Range: -50～110℃
Detection Structure: Shear Type
Case Material: Titanium
Mass: Approximately 10g
EQP SERIES CO., LTD
製品の説明 :
This system is versatile and can be used not only for general vibration monitoring but also for measurements in challenging environments and is compatible with intrinsic safety and explosion-proof requirements. The Vibrating Converter MODEL-2503 is a system that can accommodate various sensors and specifications.
A vibration monitoring system using the Intrinsic Safety Explosion-proof Detector MODEL-2450EX is composed of detectors, barriers (safety retainers), and MODEL-2503 installed in hazardous locations.
The output includes not only DC4-20mA but also two systems of vibrating waveform AC±2V. This allows not only observation on digital monitors but also connectivity to various PLCs, contributing to the IoT compatibility of facilities.
Can be used in conjunction with the high-sensitivity piezoelectric accelerometer MODEL2430.
G-TECH INSTRUMENTS INC.
製品の説明 :
A rotor that does not perform dynamic balance correction may produce unnecessary vibrations and thus reduce the productivity of the machine, as well as damage to the bearings. At the same time, it may cause damage to the outer frame or supporting device and foundation during severe movement.
G-Tech HJ-4250S-A Hard Bearing Balancing Machine is applicable for tool machine spindles, high-speed built-in spindles, motor rotors / motors, rollers, fans, centerless grinding wheels.
A maximum rotor weight of 500kg, a maximum rotor diameter of 1 meter, and measurement accuracy at low speed dynamic balance is 0.5gram-mm(max), and the can be 0.05gram-mm(max) at high-speed dynamic balance.
G-TECH INSTRUMENTS INC.
製品の説明 :
★POSITION INSPECTOR: Quick health check of your machine tool linear axis
★POSITION ANALYZER: In-depth analysis & diagnostics of your machine tool linear axis
★ROTARY AXIS INSPECTOR: Quick health check of your machine tool rotary axis
★ROTARY AXIS ANALYZER: In-depth analysis & diagnostics of your machine tool rotary axis
★SPINDLE INSPECTOR: Quick health check of your spindle accuracy & performance
★SPINDLE ANALYZER: In-depth analysis & diagnostics of your spindle accuracy & performance
BLUM PRODUCTION METROLOGY CO., LTD.
製品の説明 :
• Measuring speed up to 3 m/min
• Precise non-lobing touch characteristics
• No-wear, optoelectronic measuring mechanism
• Easy pairing procedure between probe and receiver
• Use of up to 6 measuring systems with one receiver
• Extended battery life
• Precise measurement even with coolant
Taiwan Auto-Design Co.
製品の説明 :
Polytec 3D Scanning Vibrometers are state-of-the-art
for noise and vibration measurement in research and
development. Using three independent scanning
heads they deliver the full information on all vibrational
directions. The PSV-500-3D determines operational
deflection shapes and Eigenmodes for NVH, acoustics,
structural dynamics, ultrasonics, and FEM validation.
The high frequency version up to 25 MHz extends the
application range to non-destructive evaluation (NDE)
research. Every PSV-500-3D integrates perfectly into the CAE world providing interfaces to 3D geometries,
modal analysis and automation. The scanning heads
based on helium-neon laser allow measurements
even on tiny structures due to their especially small
laser spot.
PSV Scanning Vibrometers are available as
a compact laptop version or as a practical rack-type
workstation.
Samwell Testing Inc.
製品の説明 :
PSV QTec Scanning Vibrometers take full-field vibration mapping to the next level with unrivalled optical sensitivity! Their innovative, patented QTec® technology uses multi-path interferometry based on infrared (SWIR) laser granting high-fidelity measurements on all surfaces from DC to 25 MHz. PSV QTec significantly reduce testing time - especially on dark, biological, rotating or moving objects, determining operational deflection shapes and Eigenmodes for NVH, acoustics, structural dynamics, ultrasonics, FEM validation and NDT.
BLUM PRODUCTION METROLOGY CO., LTD.
製品の説明 :
– THOUSANDS OF MEASURING VALUES OF ALL TOOL CUTTING EDGES PER SECOND
– UP TO 60% LESS MEASURING AND CHECKING TIME
– MEASUREMENT AND MONITORING OF ALL KINDS OF TOOLS, TOOL FORMS AND CUTTING MATERIALS
– COMPENSATION OF SPINDLE DRIFT AND TOOL CUTTING EDGE RUN-OUT ERRORS
