展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
RAISE PRECISION CO., LTD.
製品の説明 :
The compact, high-resolution MiniCODERs have proven their value for speed and position acquisition in highly dynamic applications. They use their full potential when installation situations with little space require a particularly compact, robust and reliable measuring system. The magnetic measuring systems consist of a ferromagnetic target wheel and a scanning unit. Without dedicated bearings, they are completely wear-free and maintenance-free. The optimised circuit and screening technique, and fully encapsulated electronics ensure reliable operation even in harsh environments.
Taiwan Auto-Design Co.
製品の説明 :
Polytec 3D Scanning Vibrometers are state-of-the-art
for noise and vibration measurement in research and
development. Using three independent scanning
heads they deliver the full information on all vibrational
directions. The PSV-500-3D determines operational
deflection shapes and Eigenmodes for NVH, acoustics,
structural dynamics, ultrasonics, and FEM validation.
The high frequency version up to 25 MHz extends the
application range to non-destructive evaluation (NDE)
research. Every PSV-500-3D integrates perfectly into the CAE world providing interfaces to 3D geometries,
modal analysis and automation. The scanning heads
based on helium-neon laser allow measurements
even on tiny structures due to their especially small
laser spot.
PSV Scanning Vibrometers are available as
a compact laptop version or as a practical rack-type
workstation.
EQP SERIES CO., LTD
製品の説明 :
Voltage Sensitivity: 10mV/(m/s²)±10%
Power Supply: DC15~36V
Constant Current: 0.5~10mA
Resonant Frequency: Approximately 40kHz
Frequency Response: 5~10kHz (±3dB)
Maximum Acceleration: 220m/s²
Shock Resistance: 49,000m/s²
Noise Level: Below 100μVRMS
Operating Temperature Range: -50~110℃
Detection Structure: Shear Type
Case Material: Titanium
Mass: Approximately 10g
BLUM PRODUCTION METROLOGY CO., LTD.
製品の説明 :
– THOUSANDS OF MEASURING VALUES OF ALL TOOL CUTTING EDGES PER SECOND
– UP TO 60% LESS MEASURING AND CHECKING TIME
– MEASUREMENT AND MONITORING OF ALL KINDS OF TOOLS, TOOL FORMS AND CUTTING MATERIALS
– COMPENSATION OF SPINDLE DRIFT AND TOOL CUTTING EDGE RUN-OUT ERRORS
TES ELECTRICAL ELECTRONIC CORP.
製品の説明 :
FEATURES
Automatic ferrous or non-ferrous substrate
material measurement
Non-magnetic coating on ferrous metal
substrate and insulating coating on
non-ferrous metal substrate measurement
Audible and visual warning when tolerance
limits are exceeded
Statistical display of significant values such as
mean value, standard deviation, min, max values
Units of measurement μm/mils select
LCD display with backlight
Auto power off
G-TECH INSTRUMENTS INC.
製品の説明 :
A rotor that does not perform dynamic balance correction may produce unnecessary vibrations and thus reduce the productivity of the machine, as well as damage to the bearings. At the same time, it may cause damage to the outer frame or supporting device and foundation during severe movement.
G-Tech HJ-4250S-A Hard Bearing Balancing Machine is applicable for tool machine spindles, high-speed built-in spindles, motor rotors / motors, rollers, fans, centerless grinding wheels.
A maximum rotor weight of 500kg, a maximum rotor diameter of 1 meter, and measurement accuracy at low speed dynamic balance is 0.5gram-mm(max), and the can be 0.05gram-mm(max) at high-speed dynamic balance.
RAISE PRECISION CO., LTD.
製品の説明 :
CAPTRON, pioneer of the first capacitive two-hand control system, ensure the highest safety category according to (Cat. 4) and PL e (DIN EN ISO 13849-1). The capacitive "safeCAP" two-hand control allows heavy machinery and systems in automated production plants, such as presses and punches, to be controlled safely and without pressure.
To start the machine the user simultaneously presses two capacitive buttons which are connected to a safety relay. Incorrect or inattentive control using just one hand or with another part of the body is detected by the system and the machine is not started.
CAPTRON supplies the safeCAP two-hand control with additional safety elements such as the Protector or the control desk for tabletop installation. These combinations enhance protection and are certified to DIN EN 574. The dynamically switching SENSORswitches detect interference factors such as dirt, dust or foreign bodies. The switches can be actuated using disposable or work gloves, however.
TES ELECTRICAL ELECTRONIC CORP.
製品の説明 :
■ Measures acceleration, Velocity and displacement
■ Maximum/Minimum record function
■ Earphone output for detecting noise in machine components
■ Manual memory stores up to 99 data
■ RMS, EQ PEAK and EQ P-P measurement
■ Wide range of vibration measurement by using different sensitivity of accelerometers
■ Excellent accelerometer for harsh environments
EQP SERIES CO., LTD
製品の説明 :
This system is versatile and can be used not only for general vibration monitoring but also for measurements in challenging environments and is compatible with intrinsic safety and explosion-proof requirements. The Vibrating Converter MODEL-2503 is a system that can accommodate various sensors and specifications.
A vibration monitoring system using the Intrinsic Safety Explosion-proof Detector MODEL-2450EX is composed of detectors, barriers (safety retainers), and MODEL-2503 installed in hazardous locations.
The output includes not only DC4-20mA but also two systems of vibrating waveform AC±2V. This allows not only observation on digital monitors but also connectivity to various PLCs, contributing to the IoT compatibility of facilities.
Can be used in conjunction with the high-sensitivity piezoelectric accelerometer MODEL2430.