展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
BUFFALO MACHINERY CO., LTD.
製品の説明 :
The AXILE G8’s powerful gantry design perfectly balances rigidity and precision, ideal for the machining of complex workpieces.
With a maximum loading capacity up to 1,300 kg on a swiveling, rotary table, complemented by high-performance built-in spindles, the G8's agility enables production of a wide range of large parts and tools.
The G8 MT option offers both milling and turning in one machine, greatly increasing operational flexibility. By reducing set-up times and potential clamping errors, the G8 MT can efficiently machine a wider variety of parts, including cylindrical components.
HEIDENHAIN CO., LTD. (TAIWAN)
製品の説明 :
Angle encoders for rotary and tilting axes are indispensable for machine tools on which high positioning accuracy and a high machining rate are essential. Because angle encoder measure angular motion of the axis directly and immediately. Mechanical transfer elements therefore have no influence on position measurement, both kinematics errors and the influences of forces are measured by the angle encoder and considered in the position control loop. This can eliminate a number of potential error sources: Gear errors, reversal error, errors due to deformation of the drive mechanics by machining forces.
HEIDENHAIN CO., LTD. (TAIWAN)
製品の説明 :
Linear encoders are indispensable for machines with high demands regarding positioning accuracy and machining speed. Linear encoders directly and immediately measure the actual position of the feed axis. This makes it possible to eliminate a number of potential error sources: Positioning error due to thermal behavior of the recirculating ball screw
, Reversal error, errors due to deformation of the drive mechanics by machining forces, kinematic errors through pitch error in the recirculating ball screw.
FUI JET TECH CO., LTD
製品の説明 :
The zero-point positioning system is a normal clamping mechanism, which is opened during ventilation and the air pressure is cut off. When the zero-point positioning system is ventilated, the pressure will pass through the compressed spring inside the piston, causing the piston to rise, and the steel balls can retreat toward the water pump. When the air source is turned off, the spring will push back the piston, and the piston handle will The steel ball is pushed toward the middle, causing the ladder bolt to
SGCAM TECHNOLOGY CO., LTD.
製品の説明 :
主功能介紹：<br />
全中文畫面，易學、易懂、易用，為加工業最適合的加工軟體，操作軟體完全不用背指令。<br />
可由AutoCAD製圖畫出工件外形，再匯入DXF圖檔，轉換為CNC程式碼。<br />
參數式的加工資料設定，作CAM只需三個步驟：（1）選擇工法（2）指定加工參數（3）計算、轉出加工G碼。<br />
參數式的資料設定，圖形改變後，加工碼會自動隨之改變。<br />
智慧型功能：<br />
工法和加工的輪廓可直接複製修改，不必再重新指定。<br />
自動清角可自動清除前一把刀具，所留下來的角落殘料。<br />
鑽孔時依據孔徑大小，自動搜尋鑽孔的加工位置，不必每一孔都去點選指定。<br />
字型可自動截割輪廓外圍不用慢慢編修。<br />
支援單筆劃字型刻字。<br />
加工路徑最佳化，各加工路徑間依最短距離自動計算，且可指定各加工路徑間不提刀以縮短加工時間，達到最佳之加工效率。<br />
立體加工： 不必畫3D曲面圖形就可做出立體加工工法，簡單夾治具可自行製作。<br />
牽引面加工：可加工彎管、簡單的立體。<br />
規則面加工：規則斜面、四角錐面、圓錐面。<br />
旋轉面加工：圓球面、葫蘆形狀。<br />
Z軸投影加工：可在不等高的平面上作投影加工。
CHIEN CHENS MACHINERY CO., LTD.
製品の説明 :
Specification
Table size: 1515 x 470 mm
Longitudinal travel: 1300 mm
Cross travel: 600 mm
Y slide way width: 720 mm
Z Slide high: MAX 810 mm
Z Slide way width: 420 mm
Spindle taper: NT#40(BT)
Spindle motor: 5HP / 4P
Spindle speed: 70~3600 RPM
Feeding speed: 10~6000 mm/min
Ballscrew: Ø32 mm C5
Net weight: 3500 kgs
REN AN INFORMATION TECHNOLOGY CO., LTD.
製品の説明 :
Realistic CNC Controller Function Panel, Modularized Machine Operation Panel, and Machine Simulation.
Excellent tool for CNC controller recognition and practicing tool offset.
CHIEN CHENS MACHINERY CO., LTD.
製品の説明 :
Specification
Table size: 1515 x 470 mm
Longitudinal travel: 1300 mm
Cross travel: 600 mm
Y slide way width: 720 mm
Z Slide high: MAX 760 mm
Z Slide way width: 420 mm
Spindle taper: NT#50(BT)
Spindle motor: 7.5HP / 2P
Spindle speed: 62~1100 RPM
Feeding speed: 10~6000 mm/min
Ballscrew: Ø32 mm C5
Net weight: 3200 kgs
HC FENG CO., LTD.
製品の説明 :
FOODIE (Chip/Sludge Removal Machine) works for :
Filtration/Removal of excess components
Chip/Sludge Removal
Fine Chip Removal
No downtime
No consumables
Backwater automatically & simultaneously
Air pressure drive w/o a plug
Vertically fast filter drying up to 90% efficiency
Precision filters effective up 20% for super filtration micro-fines
Easy to move
Filter accuracy can be adjusted
Extend cutting fluid life
BUFFALO MACHINERY CO., LTD.
製品の説明 :
With a rotary table diameter of 600 mm, the G6 is a compact vertical machining center designed for agile, smart machining of smaller workpieces requiring complex geometries and intricate features. This highly versatile VMC delivers full 5-axis CNC machining, with the built-in spindle moving along the X,Y,Z-axis, and the table moving in rotary C-axis and swiveling A-axis.
The G6’s perfect balance of speed and precision makes it the perfect option for job shops and production lines seeking an upgrade in machining capabilities, delivering high removal rates, excellent surface finishes, and maximum production efficiency.
In addition to the high-performance G6 model, AXILE also offers the G6 MT, which combines both milling and turning in one machine, greatly increasing operational flexibility. By reducing set-up times and potential clamping errors, the G6 MT can efficiently machine a wider variety of parts, including cylindrical components.
