展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
Parjet Co.,Ltd.
製品の説明 :
HiPerSeal®, aka Spring Energized Seal and Teflon Spring Seal, is a U-shaped machined performance polymer that utilizes a single spring energizer to provide force for the sealing lips. The seal jacket is made from PTFE compounds using high-performance polymer fillers to enhance overall spring seal life and wear resistance properties. The system pressure ultimately increases the sealing force and creates a leak tight seal. Because the spring loaded seal utilizes a spring, slight misalignment is tolerated, and the sealing force and jacket wear is more consistent. Spring energizers are available in corrosion resistant metal alloys such as stainless steel, Elgiloy and Hastelloy to meet the most serious corrosive and high temperature applications. We offer a wide variety of springs energizers including Canted Coil springs, Helical springs and Cantilever springs. For more information, you may refer to the tab "Spring" under "Products".
HYDROKOMP GmbH
製品の説明 :
Swing clamp cylinders release the clamping point on the workpiece. With this, it is easy to change the workpiece. This hydraulic swing clamp cylinder operates as single-acting or double-acting traction cylinder, whereas part of the stroke is used to rotate the piston. The model with 0° swing angle operates only vertical as traction cylinder.
To guarantee a long lifetime the cylinders have an integrated metal wiper as standard. For oil supply, the cylinders are equipped with threaded port and manifold port with O-ring for drilled channels. You can select between right or left turning models with various standardized swing angles. The integrated overload protection protects the swing mechanism from damage due blockage of the rotation or improper assembly of the clamping arm.
For any risk of exceeding the permitted volume flow a throttle check valve must be interposed into the oil supply line. Counter-hold the clamping arm when tightening or loosening the counter nut in order to prevent torque transfer to the piston rod and to avoid damage to the ball guide. Variations with 0°, 30°, 45°, 60° and 90° swing angles are available. The permitted operating pressure is depending from the clamping arm length.
Parjet Co.,Ltd.
製品の説明 :
PTFE Glide seal sets consists of a PTFE sealing element with a rubber O-ring functioning as elastic energizer. This type of Teflon seal is mainly used to seal reciprocating rods, pistons, and plungers, commonly found in hydraulic and pneumatic applications. The required sealing effect is achieved by radial pressure, produced by the preloaded element and system pressure, on the lip against mating surface. The elastic energizer pushes the PTFE ring against the mating surface which provides the initial sealing force for the PTFE seal.
Parjet Co.,Ltd.
製品の説明 :
Parjet has become a leader in the sealing industry by providing a full range of sealing solutions. For every complex seal application, Parjet has a solution.
Mechanical shaft seals are often an ideal sealing method. They provide the most suitable sealing method under many conditions especially high temperatures, high pressures, high viscosity (sediment), high speeds, large diameters, and many others. Most importantly, we have a highly technical mechanical seal providing and customizing the most optimal sealing solution for you.
CLAMPTEK ENTERPRISE CO., LTD.
製品の説明 :
Clamptek’s CLF5H series designed with connecting rod structure which can operate conveniently. CLF5H series can also reduce the interference with loading and unloading operation, because when CLF5H series is in the unclamping state, it’s clamping arm can be put lower than holding position.
Clamptek’s CLF5H series’ clamping arm is very flexible. By reducing the interference of the surrounding equipment, CLF5H series can save lots of working space.
Clamptek’s CLF5H series equipped with special dust proof design and high sealing, which can prevent the cutting chips and coolant to infiltration. Therefore, CLF5H series can be used in more severe conditions.
Please kindly check the suggested operating pressure as below,
Max. operating pressure: 70 kgf/cm2
Min. operating pressure: 10 kgf/cm2
HYDROKOMP GmbH
製品の説明 :
The rotary lever clamp is especially suited for clamping fixtures with only little space for the installation of clamping elements. Its construction and compact design allows flexible solutions at various installation conditions. HYDROKOMP offers hydraulic rotary lever clamps which are single-acting as well double-acting. They are used in clamping fixtures whose oil supply is made through drilled channels. To swing down the clamping arm, the linear motion is used pro rata which clamps the workpiece. To unclamp, the clamping arm swings back to where the workpiece can be safely taken out.
CHUAN TAI HYDRAULIC MACHINERY CO., LTD.
製品の説明 :
In order to solve the problem of difficult cleaning, the market developed so-called box-shaped filters, but still can not completely solve
1 takes up too much space
2 Multiple pump combination systems must be configured one-to-one, resulting in too many connectorsProne to oil leakage
In order to solve the above problems, the company has developed a pair of two-box external magnetic flange filters to reduce space and prevent oil leakage problems, reduce assembly time and parts costs
CLAMPTEK ENTERPRISE CO., LTD.
製品の説明 :
🔹The optimized design of the accessories of CHA / CHA-P series makes the structure more compact and increases the product strength.
🔹 CHA / CHA-P series equipped with special dustproof design and have high sealing performance.
🔹The designation of high anti-torque makes the durability long.
🔹 Max. operating pressure：70 kgf/cm²
Min. operating pressure：15 kgf/cm²
🔹Double acting
SHAN HUA PLASTIC INDUSTRIAL CO., LTD.
製品の説明 :
善化工業股份有限公司專業生產符合SAE100R7、SAE100R8規範之高壓油管。<br />
擁有最多樣尺寸、顏色、配置及包裝供客戶選擇。<br />
產品特點為重量輕，約橡膠管重量的1/2，受壓力時，曲線不變。<br />
採用耐候、耐磨擦、耐油性的特殊材質。可耐用各式酸鹼，並可選擇外管顏色，便利於顏色管理，亦可選擇導電和非導電型，以確保機台人員的安全。<br />
用途方面，除了可以完全取代傳統橡膠管外，可用於各式高壓液體、高壓氣體、噴塗裝機、清水溝車、農業機具、轉向系統、船舶用管等，各式液、氣體配管均可使用。<br />
CHUAN TAI HYDRAULIC MACHINERY CO., LTD.
製品の説明 :
The oil level gauge is made of special materials by injection molding, which has anti-impact characteristics and is not prone to cracking during installation.
Special specifications can be customized
HYDROKOMP GmbH
製品の説明 :
Coupling elements of HYDROKOMP are made of stainless materials. This enables the elements to be used for all fluids and gases that are not aggressive. Special designs eg. for water steam or other media are available on request. HYDROKOMP offers coupling elements for two different operating modes depressurized coupling or pressurized coupling. The elements for depressurized coupling can be coupled pressurized up to 25 bar, if the specified volume flow is not be exceeded. When using higher operating pressure there ockures a risk of demaging the soft seal in the check valve as the result of high flow velocities of the fluid. This means for coupling of air up to 10 bar there should be always used the coupling elements for depressurized coupling. This also applies when the coupling process is initiated pressurized. The elements which can be coupled pressurized may be coupled up to the maximum specified operating pressure on one side and / or on both sides.
