展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
DYNA COMPRESSOR CO., LTD.
製品の説明 :
PM MOTOR
With powerful driving core, it is more energy-saving and energy-saving
The biggest advantage of permanent magnet variable frequency air compressor is energy saving by 10%~35% in average. It depends on the working condition of the air compressor and the setting of the frequency converter.
If the air consumption fluctuates, the energy-saving effect is better. Using a high-efficiency and energy-saving control system, the starting current is small and reduce the impact on the motor and electrical components; the life of the motor is extended, and the impact on the equipment and machinery is relatively reduced.
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
製品の説明 :
1. KGC and KGCP types are suitable for grease NLGI grades 000, 00 and 0.
2. Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
3. KGC and KGCP types are controlled by PLC (Programmable Logic Controller). It can work with CV type Progressive Feeders which can supply fixed volume of grease. CV type Progressive Feeders can assure each of lubrication point has equal amount of grease.
4. Pressure switch can be added on request for checking if the piping works normally. The standard setting is at 60 bars and the standard specification is NC (Normally Closed) contact, which means if the pressure doesn't reach the default setting, it sends continuous signals. NO (Normally Open) contact is available on request.
5. Magnet Level Switch is also an optional accessory that can be added upon request. It sends continuous signal automatically when the grease level is lower than the minimum level.
6. For the first time use, slightly press the Feed button (F button) to feed grease immediately. F button can be used as manually grease feeding for no more than 3 minutes.
7. AC110V and AC220V motors have thermal controls. When the motor temperature reaches 100℃, the sensor will be on to stop the motor continue running about 5 minutes.
8. It has a pressure gauge that the operator can check the pressure easily.
9. It can be used for the machines requiring strictly rationing grease flow. It usually works with rubber or plastic machines, press machines, machine centers, woodworking machines, etc.
R PLUS TECHNOLOGY CO., LTD
製品の説明 :
1.Effectively and quickly remove water and particles
2.Easy replacement of 40μm and 5μm filter cartridges
3.Simple and accurate pressure adjustment
4.Do not turn off the air supply and stop refueling
5.Fine oil spray to ensure effective protection and extend the life of parts
6.Acid and alkali resistant cups and aluminum cups for use in volatile solvents in organic solvents and chemicals in the surrounding environment
LIS AUTOMATIC CONTROLLED CO., LTD.
製品の説明 :
The PJ-30VT is a frequency control (variable volume) complex system. Supplied for maximum 70bar (1000psi), 100bar (1500psi) or 140bar (2000psi) working pressure to Swiss Lathes, CNC Lathes, and Machining Center. This system carries the LIS Automatic patent high-performance centrifugal filtration device, extended the lifetime of the consumables, and also lets the system more stable. Designed for the restricted tank capacity machine, reduced the problems of the tank foaming and overheat effectively.
DERYUN PRECISE INDUSTRIES CO., LTD.
製品の説明 :
Focusing on making heat exchangers, water/oil coolers, A/C systems, refrigeration equipment etc., Deryun Precise Industries is known as a cooling-system authority, offering dedicated designing and planning as well as the longest warranty amongst competitors, plus the best after-sales service.
Our products help machine tools and industrial machinery to effectively control processing temperature and humidity, which not only prolong operating life of controllers but also enhance precision and stability of machinery to upgrade output quality. Contact us for quality products that better protect your machinery.
CLAMPTEK ENTERPRISE CO., LTD.
製品の説明 :
The Thread-body single acting hydraulic cylinder use imported oil seal and accessories to guarantee the quality. No oil leakage while clamping in high pressure for a long time. The volume of the thread-body single acting hydraulic cylinder is small. It can be utilized in a small space in the fixture.
This hydraulic cylinder is used to extend out, and when spring returns, but it can't be used for pulling back.
The angle degree between the cylinder and workpiece could not be larger than 10° while installing.
The bottom of the cylinder barrel needs a leakage-proof gasket.
Max. operating pressure: 250 kgf/cm²
Min. operating pressure: 20 kgf/cm²
Single acting
Usable fluid:
HABOR PRECISION INC.
製品の説明 :
> Applications
CNC Machining Center、CNC Grinding machine、Broaching machine、CNC Wood-working 、Machine、CNC Mechanical Press、CNC Lathe、High Speed Lathe
Hydraulic Unit
High Speed Spindle
> Feature
Prevent temperature increasing of spindle, improve working precision of machine.
Prevent deviation of spindle center line or heat deformation of machine.
Extend the lifetime of the machine.
Stabilize oil pressure, prevent oil vibration.
Easy operation, low noise.
HYDROKOMP GmbH
製品の説明 :
The rotary lever clamp is especially suited for clamping fixtures with only little space for the installation of clamping elements. Its construction and compact design allows flexible solutions at various installation conditions. HYDROKOMP offers hydraulic rotary lever clamps which are single-acting as well double-acting. They are used in clamping fixtures whose oil supply is made through drilled channels. To swing down the clamping arm, the linear motion is used pro rata which clamps the workpiece. To unclamp, the clamping arm swings back to where the workpiece can be safely taken out.
HABOR PRECISION INC.
製品の説明 :
> Applications
Spindle, Linear Motor, Ball Screw, Grinding Liquid, CNC Cutting System, CNC Lathe, Other Machining Center
> Feature
Prevent deterioration of liquid.
Open coil type heat exchanger can prevent the obstruction problem of liquid circulating system.
Advance the speed of process.
Maintain the stability of dielectric fluid, advance the process quality.
Avoid fire risk cause by temperature rise and accumulating of dielectric fluid, advance the working safety.
Reduce the wastage of electrode.
Prevent the spreading of foul odor air, reduce the air pollution.
Easy operation and low noise.
Made of anticorrosive material.