展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
HABOR PRECISION INC.
製品の説明 :
HABOR_ HIG DC Inverter Cooler_ High energy-saving X Low-carbon emission
Upgraded with new generation refrigerant_ R513A which is Low-GWP to reduce the warming influence, Habor HIG series is the best partner for green machine tools.
Habor HIG series is a DC inverter cooler integrated technologies of smart IoT, energy-saving, high-accuracy control, equipped with Ethernet Communication protocol for remote setting and real time monitoring, intelligent management of predictive maintenance and status detection.
Thanks to speed control and frequency conversion technology, HIG series can save energy cost up to 60%. In 2024, we announced new coolers which uses LOW-GWP refrigerant R513A on the base of use less refrigerant system to reduce carbon emission up to 70% .
Habor provides wide range of high precision temperature control system to machining process, such like cooling for spindles, coolant, linear motors, ball screw, gear box, hydraulic systems….etc.
Going forward Net Zero by 2050, except DC inverter cooler unit, Habor also provides various solutions to help users to save cost of factory electrical consumption. For more information, you are welcome to our booth in TMTS2024.
Habor Booth No. P0114, 1F Hall 2
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
製品の説明 :
1. KGC and KGCP types are suitable for grease NLGI grades 000, 00 and 0.
2. Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
3. KGC and KGCP types are controlled by PLC (Programmable Logic Controller). It can work with CV type Progressive Feeders which can supply fixed volume of grease. CV type Progressive Feeders can assure each of lubrication point has equal amount of grease.
4. Pressure switch can be added on request for checking if the piping works normally. The standard setting is at 60 bars and the standard specification is NC (Normally Closed) contact, which means if the pressure doesn't reach the default setting, it sends continuous signals. NO (Normally Open) contact is available on request.
5. Magnet Level Switch is also an optional accessory that can be added upon request. It sends continuous signal automatically when the grease level is lower than the minimum level.
6. For the first time use, slightly press the Feed button (F button) to feed grease immediately. F button can be used as manually grease feeding for no more than 3 minutes.
7. AC110V and AC220V motors have thermal controls. When the motor temperature reaches 100℃, the sensor will be on to stop the motor continue running about 5 minutes.
8. It has a pressure gauge that the operator can check the pressure easily.
9. It can be used for the machines requiring strictly rationing grease flow. It usually works with rubber or plastic machines, press machines, machine centers, woodworking machines, etc.
HYDROKOMP GmbH
製品の説明 :
The rotary lever clamp is especially suited for clamping fixtures with only little space for the installation of clamping elements. Its construction and compact design allows flexible solutions at various installation conditions. HYDROKOMP offers hydraulic rotary lever clamps which are single-acting as well double-acting. They are used in clamping fixtures whose oil supply is made through drilled channels. To swing down the clamping arm, the linear motion is used pro rata which clamps the workpiece. To unclamp, the clamping arm swings back to where the workpiece can be safely taken out.
JASON AUTOMATION CO., LTD.
製品の説明 :
CytroPac - The compact revolution for hydraulic power units: completely equipped and integrated.
Rexroth has started the hydraulic power unit revolution. Lack of installation space is no longer a reason to go without hydraulic power: The new CytroPac power unit provides maximum power in the smallest space with everything you need for fast installation – including an economical Sytronix drive, completely wired frequency converter and Industry 4.0 compatibility. With powerful 4 KW and pressure of 240 bar in 50 percent less installation space. Furthermore, CytroPac also complies with the EU Ecodesign Directive 2009/125/EC. Simply connect power, fluid and interface and go. A small revolution!
HYDROKOMP GmbH
製品の説明 :
Coupling elements of HYDROKOMP are made of stainless materials. This enables the elements to be used for all fluids and gases that are not aggressive. Special designs eg. for water steam or other media are available on request. HYDROKOMP offers coupling elements for two different operating modes depressurized coupling or pressurized coupling. The elements for depressurized coupling can be coupled pressurized up to 25 bar, if the specified volume flow is not be exceeded. When using higher operating pressure there ockures a risk of demaging the soft seal in the check valve as the result of high flow velocities of the fluid. This means for coupling of air up to 10 bar there should be always used the coupling elements for depressurized coupling. This also applies when the coupling process is initiated pressurized. The elements which can be coupled pressurized may be coupled up to the maximum specified operating pressure on one side and / or on both sides.
LIS AUTOMATIC CONTROLLED CO., LTD.
製品の説明 :
PJ-30MT is a fixed volume complex system. Controlled by the modular PCB board, provided the abnormal message notification of the system effectively. Suitable for using the fixed volume machines, such as CNC lathes, machine centers. This system integrates great advice from our countless loyal customers, and also LIS gain experiences in a broad of customers’ base developed a high-pressure coolant system for most industries when customers use the PJ system, it is more humane, easy to install, operate and maintain. Without a doubt, this is just a product of LIS which combine the suggestion from multiple parties.
DYNA COMPRESSOR CO., LTD.
製品の説明 :
2 STAGE ROTARY SCREW
Powerful two stage compression performance surpasses one stage compression.
For this series of new designs, we use two-stage compression. The compression efficiency creates the most energy-efficient air compressor, keeping the flow rate, power consumption and temperature in the best condition, making the screw air compressor more energy-saving, more power-saving, and more suitable for your use. Improve your production efficiency, and also greatly save power consumption. Our design and manufacturing technique has always been being the quality guarantee.
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
製品の説明 :
1. CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. With CAB or CBB type volume distributor, oil will feed during operation time. With CDB or T type volume distributor, oil will feed during interval time.
2. The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.
3. It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered.
4. CEN03 type has a pressure switch device and been set up as 8kg/cm2, which assures the oil volume of lubrication point and check if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request.
5. It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal.
6. It has a pressure gauge where an operator can check the pressure easily.
7. Do not press the force feed-oil (F button) more than three minutes in order to avoid overloading. When the temperature reaches 100℃, the sensor will be on to stop the motor continuing running about 5 minutes.
8. It can be used for the machines requiring strictly rationing oil flow. It is usually used for such as processing machines or projecting machines.
ZHAO YI HSIN INDUSTRIAL CO., LTD.
製品の説明 :
Providing clean compressed air without energy consumption
No power required
Applying characteristics of compressed air, hydromechanics and physical principles to design internal structure.
Consumable-free, maintenance-free
Exclusive patented structural design can separate moisture from compressed air without consumables.
Efficiency of air drying and moisture filtration: 99%
Patented high efficiency water-cooled heat exchanger and special air-water separation structure.
High quality, durable, and longevity up to 10 years
No compromise on quality, the product is made in Taiwan.
No electronic and other energy-driven device
Suitable for those who have special needs for compressed air.
