展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
DYNA COMPRESSOR CO., LTD.
製品の説明 :
2 STAGE ROTARY SCREW
Powerful two stage compression performance surpasses one stage compression.
For this series of new designs, we use two-stage compression. The compression efficiency creates the most energy-efficient air compressor, keeping the flow rate, power consumption and temperature in the best condition, making the screw air compressor more energy-saving, more power-saving, and more suitable for your use. Improve your production efficiency, and also greatly save power consumption. Our design and manufacturing technique has always been being the quality guarantee.
Parjet Co.,Ltd.
製品の説明 :
HiPerLip®, also known as PTFE Shaft Seal, is a rotary shaft seal with a PTFE sealing lip and metal casing. The rotary seal is ideal for sealing high-speed rotary applications with very low friction and minimal power draw to achieve better performance, higher response, and precision. Thanks to excellent PTFE compounds and the unique sealing lip construction, the PTFE rotary lip seal with metal case provides superior performance over conventional rotary oil seals, especially in high rotary, poorly lubricated, highly corrosive, high temperatures, and other extreme working environments. Typical temperatures range from -60°C to 200°C (-76°F to 390°F), and shaft speeds up to 30 m/s (5,905 fpm) for low pressure applications.
HYDROKOMP GmbH
製品の説明 :
Swing clamp cylinders release the clamping point on the workpiece. With this, it is easy to change the workpiece. This hydraulic swing clamp cylinder operates as single-acting or double-acting traction cylinder, whereas part of the stroke is used to rotate the piston. The model with 0° swing angle operates only vertical as traction cylinder.
To guarantee a long lifetime the cylinders have an integrated metal wiper as standard. For oil supply, the cylinders are equipped with threaded port and manifold port with O-ring for drilled channels. You can select between right or left turning models with various standardized swing angles. The integrated overload protection protects the swing mechanism from damage due blockage of the rotation or improper assembly of the clamping arm.
For any risk of exceeding the permitted volume flow a throttle check valve must be interposed into the oil supply line. Counter-hold the clamping arm when tightening or loosening the counter nut in order to prevent torque transfer to the piston rod and to avoid damage to the ball guide. Variations with 0°, 30°, 45°, 60° and 90° swing angles are available. The permitted operating pressure is depending from the clamping arm length.
HABOR PRECISION INC.
製品の説明 :
> Applications
CNC Machining Center、CNC Grinding machine、Broaching machine、CNC Wood-working 、Machine、CNC Mechanical Press、CNC Lathe、High Speed Lathe
Hydraulic Unit
High Speed Spindle
> Feature
Prevent temperature increasing of spindle, improve working precision of machine.
Prevent deviation of spindle center line or heat deformation of machine.
Extend the lifetime of the machine.
Stabilize oil pressure, prevent oil vibration.
Easy operation, low noise.
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
製品の説明 :
1. CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. With CAB or CBB type volume distributor, oil will feed during operation time. With CDB or T type volume distributor, oil will feed during interval time.
2. The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.
3. It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered.
4. CEN03 type has a pressure switch device and been set up as 8kg/cm2, which assures the oil volume of lubrication point and check if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request.
5. It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal.
6. It has a pressure gauge where an operator can check the pressure easily.
7. Do not press the force feed-oil (F button) more than three minutes in order to avoid overloading. When the temperature reaches 100℃, the sensor will be on to stop the motor continuing running about 5 minutes.
8. It can be used for the machines requiring strictly rationing oil flow. It is usually used for such as processing machines or projecting machines.
WEXTEN PRECISE INDUSTRIES CO., LTD.
製品の説明 :
■ The unit is lightweight, easy to install and noiseless.
■ Unlike traditional air conditioners, the system utilizes oil/water for heat exchange, instead of piping refrigerant gas directly to the cooling coils.
■ Amazing performance even in high environmental temperatures.
■ Achieving energy savings and carbon reduction by applying secondary circulation with P.C.W. or the oil/water coolers.
■ No compressor, no need for refrigerants, so no concerns about Global Warming Potential (GWP) values.
HABOR PRECISION INC.
製品の説明 :
> Applications
Grinding Liquid、CNC Cutting System、CNC Lathe、Other Machining Center
> Feature
Prevent deterioration of liquid.
Open coil type heat exchanger can prevent the obstruction problem of liquid circulating system.
Advance the speed of process.
Maintain the stability of dielectric fluid, advance the process quality.
Avoid fire risk cause by temperature rise and accumulating of dielectric fluid, advance the working safety.
Reduce the wastage of electrode.
Prevent the spreading of foul odor air, reduce the air pollution.
Easy operation and low noise.
Made of anticorrosive material.
DYNA COMPRESSOR CO., LTD.
製品の説明 :
Air end compression system
100% imported from Germany. Inorder to ensure the quality ofoperation and stable air flow of the air compressor, we use Germanhigh-precision rotors with stableperformance, excellent quality, and more durablity.
Dyna Compressor With continuous R&D and renovation, our product is advance with times, our goal is to be the most competitive brand,
professional, exquisite, design that with enough flexibility and mobility to meet challenges of the market. Customized is our standard procedure. We grab every possible chance to provide new opportunity and vitality for
industrial reengineering. Under this rapidly changing, competitive era, the
only constant belief of ours is “quality is our strength”.
