展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
CLAMPTEK ENTERPRISE CO., LTD.
製品の説明 :
The Thread-body single acting hydraulic cylinder use imported oil seal and accessories to guarantee the quality. No oil leakage while clamping in high pressure for a long time. The volume of the thread-body single acting hydraulic cylinder is small. It can be utilized in a small space in the fixture.
This hydraulic cylinder is used to extend out, and when spring returns, but it can't be used for pulling back.
The angle degree between the cylinder and workpiece could not be larger than 10° while installing.
The bottom of the cylinder barrel needs a leakage-proof gasket.
Max. operating pressure: 250 kgf/cm²
Min. operating pressure: 20 kgf/cm²
Single acting
Usable fluid:
CHUAN TAI HYDRAULIC MACHINERY CO., LTD.
製品の説明 :
In order to solve the problem of difficult cleaning, the market developed so-called box-shaped filters, but still can not completely solve
1 takes up too much space
2 Multiple pump combination systems must be configured one-to-one, resulting in too many connectorsProne to oil leakage
In order to solve the above problems, the company has developed a pair of two-box external magnetic flange filters to reduce space and prevent oil leakage problems, reduce assembly time and parts costs
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
製品の説明 :
1. KGC and KGCP types are suitable for grease NLGI grades 000, 00 and 0.
2. Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
3. KGC and KGCP types are controlled by PLC (Programmable Logic Controller). It can work with CV type Progressive Feeders which can supply fixed volume of grease. CV type Progressive Feeders can assure each of lubrication point has equal amount of grease.
4. Pressure switch can be added on request for checking if the piping works normally. The standard setting is at 60 bars and the standard specification is NC (Normally Closed) contact, which means if the pressure doesn't reach the default setting, it sends continuous signals. NO (Normally Open) contact is available on request.
5. Magnet Level Switch is also an optional accessory that can be added upon request. It sends continuous signal automatically when the grease level is lower than the minimum level.
6. For the first time use, slightly press the Feed button (F button) to feed grease immediately. F button can be used as manually grease feeding for no more than 3 minutes.
7. AC110V and AC220V motors have thermal controls. When the motor temperature reaches 100℃, the sensor will be on to stop the motor continue running about 5 minutes.
8. It has a pressure gauge that the operator can check the pressure easily.
9. It can be used for the machines requiring strictly rationing grease flow. It usually works with rubber or plastic machines, press machines, machine centers, woodworking machines, etc.
TORNG INDUSTRIAL CO., LTD.
製品の説明 :
* To provide cooling, lubrication and chips removal functions simultaneously.
* It's designed for machinability, machining speed and extend the tool life.
* To save machining time and reduce machining cost.
* To ensure high quality of machining and cutting performance.
HABOR PRECISION INC.
製品の説明 :
HABOR_ HIG DC Inverter Cooler_ High energy-saving X Low-carbon emission
Upgraded with new generation refrigerant_ R513A which is Low-GWP to reduce the warming influence, Habor HIG series is the best partner for green machine tools.
Habor HIG series is a DC inverter cooler integrated technologies of smart IoT, energy-saving, high-accuracy control, equipped with Ethernet Communication protocol for remote setting and real time monitoring, intelligent management of predictive maintenance and status detection.
Thanks to speed control and frequency conversion technology, HIG series can save energy cost up to 60%. In 2024, we announced new coolers which uses LOW-GWP refrigerant R513A on the base of use less refrigerant system to reduce carbon emission up to 70% .
Habor provides wide range of high precision temperature control system to machining process, such like cooling for spindles, coolant, linear motors, ball screw, gear box, hydraulic systems….etc.
Going forward Net Zero by 2050, except DC inverter cooler unit, Habor also provides various solutions to help users to save cost of factory electrical consumption. For more information, you are welcome to our booth in TMTS2024.
Habor Booth No. P0114, 1F Hall 2
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
製品の説明 :
1. Fixed amount of oil feeding that can supply the required amount of oil to each lubricating point.
2. There are various choices of discharge volume, 0.1, 0.2, 0.3, 0.4 and 0.5cc per stroke. The discharge volume of each outlet can be different.
3. Each discharge outlet has a detective piston that can detect if the pipe system works functionally.
4. T type 0.5cc can be assembled either NO (Normal Contact) or NC (Normal Close) Contact sensor switch. It also can be set up as NO or NC Contact upon request. When it is set up as NO Contact, it sends signal during the operation time. When it is set up as NC Contact, it sends signal during the interval time.
5. T type volume distributors accumulate oil inside of the distributor and discharge oil during the interval time.
6. T type volume distributors have to work with oil pressure-relief type lubricators. The lowest operation pressure is 8 kgf/c㎡ and the max pressure is 30 kgf/c㎡.
7. The viscosity range of oil is 32 ~90 cSt @ 40℃.
HAWE Hydraulik Singapore Pte. Ltd. Taiwan Branch
製品の説明 :
Directional seated valves are a type of directional valve. As cone valves they are tightly sealed, with zero leakage in the closed state.
The directional seated valve type ROLV is available as a 3/2, 4/2 or 4/3-way directional seated valve with different plug types. The patented assembly consists of two parts: a round basic valve with the valve inserts, and an adapter plate which can be designed for manifold mounting with nominal size NG 6 as the
standard connection pattern, or for direct pipe connection.
Additional elements such as a check valve, a restrictor (on the consumer side) and/ or restrictor check valves can be integrated, depending on the functional requirement and adapter plate. The type ROLV can be combined in the valve bank type BA with other types of valves.
Features and benefits
■ Dirt-resistant design with high switching reliability
■ Interchangeable solenoid for greater flexibility and easy servicing
Intended applications
■ Machine tools (cutting and non-cutting)
■ Clamping tools, punching tools, fixtures
■ Testing machinery
■ Wind turbines
WEXTEN PRECISE INDUSTRIES CO., LTD.
製品の説明 :
■Single refrigerant circuit is with multiple oil circuits, and it provides independent flow rate and pressure precisely.
■ Different liquids can be controlled temperature at the same time,and it can be customized.
■ Temperature control of Dual-PCB for each of plural circuits and it can adjust temperature individually.
■ It has temperature compensation and preheated function.
■ Temperature control precision is +0.5~1.5 ㆍC. (It can be customized of other temperature control precision.)
■ Saving about 50% of floor space.
■ Using high-efficiency environmental refrigerant and without pollution.
■ Up-to 95% materials of machine are recyclable and eco-friendly.
RAISE PRECISION CO., LTD.
製品の説明 :
CAPTRON, pioneer of the first capacitive two-hand control system, ensure the highest safety category according to (Cat. 4) and PL e (DIN EN ISO 13849-1). The capacitive "safeCAP" two-hand control allows heavy machinery and systems in automated production plants, such as presses and punches, to be controlled safely and without pressure.
To start the machine the user simultaneously presses two capacitive buttons which are connected to a safety relay. Incorrect or inattentive control using just one hand or with another part of the body is detected by the system and the machine is not started.
CAPTRON supplies the safeCAP two-hand control with additional safety elements such as the Protector or the control desk for tabletop installation. These combinations enhance protection and are certified to DIN EN 574. The dynamically switching SENSORswitches detect interference factors such as dirt, dust or foreign bodies. The switches can be actuated using disposable or work gloves, however.
