展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
WEXTEN PRECISE INDUSTRIES CO., LTD.
製品の説明 :
■ The unit is lightweight, easy to install and noiseless.
■ Unlike traditional air conditioners, the system utilizes oil/water for heat exchange, instead of piping refrigerant gas directly to the cooling coils.
■ Amazing performance even in high environmental temperatures.
■ Achieving energy savings and carbon reduction by applying secondary circulation with P.C.W. or the oil/water coolers.
■ No compressor, no need for refrigerants, so no concerns about Global Warming Potential (GWP) values.
RAISE PRECISION CO., LTD.
製品の説明 :
Capacitive switches with touch sensor technology
The first capacitive switches with touch sensor technology from CAPTRON were used in 1994 for public transportation. Today, CAPTRON offers a wide range of capacitive SENSORswitches for various industries and applications where unconditional reliability, durability, comfort and design are required.
If necessary, SENSORswitches from the standard range can be tailored and modified optically and technically to meet individual customer demands.
HYDROKOMP GmbH
製品の説明 :
Swing clamp cylinders release the clamping point on the workpiece. With this, it is easy to change the workpiece. This hydraulic swing clamp cylinder operates as single-acting or double-acting traction cylinder, whereas part of the stroke is used to rotate the piston. The model with 0° swing angle operates only vertical as traction cylinder.
To guarantee a long lifetime the cylinders have an integrated metal wiper as standard. For oil supply, the cylinders are equipped with threaded port and manifold port with O-ring for drilled channels. You can select between right or left turning models with various standardized swing angles. The integrated overload protection protects the swing mechanism from damage due blockage of the rotation or improper assembly of the clamping arm.
For any risk of exceeding the permitted volume flow a throttle check valve must be interposed into the oil supply line. Counter-hold the clamping arm when tightening or loosening the counter nut in order to prevent torque transfer to the piston rod and to avoid damage to the ball guide. Variations with 0°, 30°, 45°, 60° and 90° swing angles are available. The permitted operating pressure is depending from the clamping arm length.
CLAMPTEK ENTERPRISE CO., LTD.
製品の説明 :
Clamptek’s CLKA series is using the optimal designation, so the clamping capacity is higher than other cylinders. The cylinder body and the fulcrum are integrated structured. Therefore, the cylinder’s size is smaller and it’s more solid and firm.
Clamptek’s CLKA series uses special dust seals to ensure the high dust proof and high sealing performance. As for the lower flange part, which uses minimized designation, it’s suitable for the compact and light fixture.
If you have any customized requests, please feel free to contact us.
Please kindly check the suggested operating pressure as below,
Max. operating pressure: 70 kgf/cm2
Min. operating pressure: 10 kgf/cm2
HAWE Hydraulik Singapore Pte. Ltd. Taiwan Branch
製品の説明 :
Directional seated valves are a type of directional valve. As cone valves they are tightly sealed, with zero leakage in the closed state.
The directional seated valve type ROLV is available as a 3/2, 4/2 or 4/3-way directional seated valve with different plug types. The patented assembly consists of two parts: a round basic valve with the valve inserts, and an adapter plate which can be designed for manifold mounting with nominal size NG 6 as the
standard connection pattern, or for direct pipe connection.
Additional elements such as a check valve, a restrictor (on the consumer side) and/ or restrictor check valves can be integrated, depending on the functional requirement and adapter plate. The type ROLV can be combined in the valve bank type BA with other types of valves.
Features and benefits
■ Dirt-resistant design with high switching reliability
■ Interchangeable solenoid for greater flexibility and easy servicing
Intended applications
■ Machine tools (cutting and non-cutting)
■ Clamping tools, punching tools, fixtures
■ Testing machinery
■ Wind turbines
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
製品の説明 :
1. KGC and KGCP types are suitable for grease NLGI grades 000, 00 and 0.
2. Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
3. KGC and KGCP types are controlled by PLC (Programmable Logic Controller). It can work with CV type Progressive Feeders which can supply fixed volume of grease. CV type Progressive Feeders can assure each of lubrication point has equal amount of grease.
4. Pressure switch can be added on request for checking if the piping works normally. The standard setting is at 60 bars and the standard specification is NC (Normally Closed) contact, which means if the pressure doesn't reach the default setting, it sends continuous signals. NO (Normally Open) contact is available on request.
5. Magnet Level Switch is also an optional accessory that can be added upon request. It sends continuous signal automatically when the grease level is lower than the minimum level.
6. For the first time use, slightly press the Feed button (F button) to feed grease immediately. F button can be used as manually grease feeding for no more than 3 minutes.
7. AC110V and AC220V motors have thermal controls. When the motor temperature reaches 100℃, the sensor will be on to stop the motor continue running about 5 minutes.
8. It has a pressure gauge that the operator can check the pressure easily.
9. It can be used for the machines requiring strictly rationing grease flow. It usually works with rubber or plastic machines, press machines, machine centers, woodworking machines, etc.
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
製品の説明 :
1. Fixed amount of oil feeding that can supply the required amount of oil to each lubricating point.
2. There are various choices of discharge volume, 0.1, 0.2, 0.3, 0.4 and 0.5cc per stroke. The discharge volume of each outlet can be different.
3. Each discharge outlet has a detective piston that can detect if the pipe system works functionally.
4. T type 0.5cc can be assembled either NO (Normal Contact) or NC (Normal Close) Contact sensor switch. It also can be set up as NO or NC Contact upon request. When it is set up as NO Contact, it sends signal during the operation time. When it is set up as NC Contact, it sends signal during the interval time.
5. T type volume distributors accumulate oil inside of the distributor and discharge oil during the interval time.
6. T type volume distributors have to work with oil pressure-relief type lubricators. The lowest operation pressure is 8 kgf/c㎡ and the max pressure is 30 kgf/c㎡.
7. The viscosity range of oil is 32 ~90 cSt @ 40℃.
HABOR PRECISION INC.
製品の説明 :
> Applications
Spindle, Linear Motor, Ball Screw, Grinding Liquid, CNC Cutting System, CNC Lathe, Other Machining Center
> Feature
Prevent deterioration of liquid.
Open coil type heat exchanger can prevent the obstruction problem of liquid circulating system.
Advance the speed of process.
Maintain the stability of dielectric fluid, advance the process quality.
Avoid fire risk cause by temperature rise and accumulating of dielectric fluid, advance the working safety.
Reduce the wastage of electrode.
Prevent the spreading of foul odor air, reduce the air pollution.
Easy operation and low noise.
Made of anticorrosive material.
