展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
Parjet Co.,Ltd.
製品の説明 :
HiPerSeal®, aka Spring Energized Seal and Teflon Spring Seal, is a U-shaped machined performance polymer that utilizes a single spring energizer to provide force for the sealing lips. The seal jacket is made from PTFE compounds using high-performance polymer fillers to enhance overall spring seal life and wear resistance properties. The system pressure ultimately increases the sealing force and creates a leak tight seal. Because the spring loaded seal utilizes a spring, slight misalignment is tolerated, and the sealing force and jacket wear is more consistent. Spring energizers are available in corrosion resistant metal alloys such as stainless steel, Elgiloy and Hastelloy to meet the most serious corrosive and high temperature applications. We offer a wide variety of springs energizers including Canted Coil springs, Helical springs and Cantilever springs. For more information, you may refer to the tab "Spring" under "Products".
HYDROKOMP GmbH
製品の説明 :
Coupling elements of HYDROKOMP are made of stainless materials. This enables the elements to be used for all fluids and gases that are not aggressive. Special designs eg. for water steam or other media are available on request. HYDROKOMP offers coupling elements for two different operating modes depressurized coupling or pressurized coupling. The elements for depressurized coupling can be coupled pressurized up to 25 bar, if the specified volume flow is not be exceeded. When using higher operating pressure there ockures a risk of demaging the soft seal in the check valve as the result of high flow velocities of the fluid. This means for coupling of air up to 10 bar there should be always used the coupling elements for depressurized coupling. This also applies when the coupling process is initiated pressurized. The elements which can be coupled pressurized may be coupled up to the maximum specified operating pressure on one side and / or on both sides.
CHANGHUA CHEN YING OIL MACHINE CO., LTD.
製品の説明 :
1. CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors. With CAB or CBB type volume distributor, oil will feed during operation time. With CDB or T type volume distributor, oil will feed during interval time.
2. The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.
3. It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered.
4. CEN03 type has a pressure switch device and been set up as 8kg/cm2, which assures the oil volume of lubrication point and check if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request.
5. It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal.
6. It has a pressure gauge where an operator can check the pressure easily.
7. Do not press the force feed-oil (F button) more than three minutes in order to avoid overloading. When the temperature reaches 100℃, the sensor will be on to stop the motor continuing running about 5 minutes.
8. It can be used for the machines requiring strictly rationing oil flow. It is usually used for such as processing machines or projecting machines.
HYDROKOMP GmbH
製品の説明 :
The rotary lever clamp is especially suited for clamping fixtures with only little space for the installation of clamping elements. Its construction and compact design allows flexible solutions at various installation conditions. HYDROKOMP offers hydraulic rotary lever clamps which are single-acting as well double-acting. They are used in clamping fixtures whose oil supply is made through drilled channels. To swing down the clamping arm, the linear motion is used pro rata which clamps the workpiece. To unclamp, the clamping arm swings back to where the workpiece can be safely taken out.
CLAMPTEK ENTERPRISE CO., LTD.
製品の説明 :
Clamptek’s CLKA series is using the optimal designation, so the clamping capacity is higher than other cylinders. The cylinder body and the fulcrum are integrated structured. Therefore, the cylinder’s size is smaller and it’s more solid and firm.
Clamptek’s CLKA series uses special dust seals to ensure the high dust proof and high sealing performance. As for the lower flange part, which uses minimized designation, it’s suitable for the compact and light fixture.
If you have any customized requests, please feel free to contact us.
Please kindly check the suggested operating pressure as below,
Max. operating pressure: 70 kgf/cm2
Min. operating pressure: 10 kgf/cm2
FUTECH PRECISION CO.,LTD.
製品の説明 :
Ultra-short, high speed, light weight.
Designed with a detection device, which can be equipped with an inductive proximity switch.
Easy to adjust to ensure the correct operation of the hydraulic cylinder.
Built-in safty self-locking valve and pressure relief valve.
Dual-purpose type, can be installed by the front and rear ends.
The oil pipe must be connected to the oil pressure tank separately to avoid back pressure.
JASON AUTOMATION CO., LTD.
製品の説明 :
CytroPac - The compact revolution for hydraulic power units: completely equipped and integrated.
Rexroth has started the hydraulic power unit revolution. Lack of installation space is no longer a reason to go without hydraulic power: The new CytroPac power unit provides maximum power in the smallest space with everything you need for fast installation – including an economical Sytronix drive, completely wired frequency converter and Industry 4.0 compatibility. With powerful 4 KW and pressure of 240 bar in 50 percent less installation space. Furthermore, CytroPac also complies with the EU Ecodesign Directive 2009/125/EC. Simply connect power, fluid and interface and go. A small revolution!
ZHAO YI HSIN INDUSTRIAL CO., LTD.
製品の説明 :
Providing clean compressed air without energy consumption
No power required
Applying characteristics of compressed air, hydromechanics and physical principles to design internal structure.
Consumable-free, maintenance-free
Exclusive patented structural design can separate moisture from compressed air without consumables.
Efficiency of air drying and moisture filtration: 99%
Patented high efficiency water-cooled heat exchanger and special air-water separation structure.
High quality, durable, and longevity up to 10 years
No compromise on quality, the product is made in Taiwan.
No electronic and other energy-driven device
Suitable for those who have special needs for compressed air.
DYNA COMPRESSOR CO., LTD.
製品の説明 :
PM MOTOR
With powerful driving core, it is more energy-saving and energy-saving
The biggest advantage of permanent magnet variable frequency air compressor is energy saving by 10%~35% in average. It depends on the working condition of the air compressor and the setting of the frequency converter.
If the air consumption fluctuates, the energy-saving effect is better. Using a high-efficiency and energy-saving control system, the starting current is small and reduce the impact on the motor and electrical components; the life of the motor is extended, and the impact on the equipment and machinery is relatively reduced.
FUTECH PRECISION CO.,LTD.
製品の説明 :
Ultra-short, large-diameter rotary hydraulic cylinder, lightweight design, more stable performance during high rotation, reducing spindle load.
The built-in safety self-locking valve ensures the pressure is immediately maintained during abnormal power outage and the built-in pressure relief valve.
Dual-purpose type, can be installed by the front and rear ends.
