展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
HEIDENHAIN CO., LTD. (TAIWAN)
製品の説明 :
Angle encoders for rotary and tilting axes are indispensable for machine tools on which high positioning accuracy and a high machining rate are essential. Because angle encoder measure angular motion of the axis directly and immediately. Mechanical transfer elements therefore have no influence on position measurement, both kinematics errors and the influences of forces are measured by the angle encoder and considered in the position control loop. This can eliminate a number of potential error sources: Gear errors, reversal error, errors due to deformation of the drive mechanics by machining forces.
HC FENG CO., LTD.
製品の説明 :
Replenishing Fluid automatically, accurate cutting fluid concentration. One equipment to multiple CNC machining centers. The supply line can be as long as 20 meters.
#Filtration by 3 filters #Sterilization by ozone # Oil-water mixer to precise mixing 0-10% cutting fluid #Stirring device avoid cutting fluid become stagnant water. #oil tank level meter for 50 gallon barrel low level detection.
HC FENG CO., LTD.
製品の説明 :
The combination of centrifugal device and magnetic separator is perfect for processing water-and oil-based cutting fluids and sludge containing magnetic dusts and shavings. The shaving removal is quick and effective, which saves a lot of time waiting and minimizes the costs to replace consumables.
CHIEN CHENS MACHINERY CO., LTD.
製品の説明 :
Specification
Table size: 1515 x 470 mm
Longitudinal travel: 1300 mm
Cross travel: 600 mm
Y slide way width: 720 mm
Z Slide high: MAX 810 mm
Z Slide way width: 420 mm
Spindle taper: NT#40(BT)
Spindle motor: 5HP / 4P
Spindle speed: 70~3600 RPM
Feeding speed: 10~6000 mm/min
Ballscrew: Ø32 mm C5
Net weight: 3500 kgs
FUI JET TECH CO., LTD
製品の説明 :
The zero-point positioning system is a normal clamping mechanism, which is opened during ventilation and the air pressure is cut off. When the zero-point positioning system is ventilated, the pressure will pass through the compressed spring inside the piston, causing the piston to rise, and the steel balls can retreat toward the water pump. When the air source is turned off, the spring will push back the piston, and the piston handle will The steel ball is pushed toward the middle, causing the ladder bolt to
HC FENG CO., LTD.
製品の説明 :
FOODIE (Chip/Sludge Removal Machine) works for :
Filtration/Removal of excess components
Chip/Sludge Removal
Fine Chip Removal
No downtime
No consumables
Backwater automatically & simultaneously
Air pressure drive w/o a plug
Vertically fast filter drying up to 90% efficiency
Precision filters effective up 20% for super filtration micro-fines
Easy to move
Filter accuracy can be adjusted
Extend cutting fluid life
LEADWELL CNC MACHINES MFG., CORP.
製品の説明 :
The 5 axes simultaneous processing, can reduce the times of workpiece unloading and the requirement of the jigs, shorten the processing time and improve performance. C-axis table using the DD motor provides high torque and rigidity and can solve the traditional worm gear backlash and worn problems. High torque and efficiency of the spindle with a complete high-rigidity structure applied results in roughing to finishing can be completed on the same machine, suitable for machining hard materials and non-ferrous materials processing.
X-axis travel: 1300mm
Y-axis travel: 610mm
Z-axis travel: 610/750mm
Table size: 1480x610mm
Max. table load: 1600kg
Spindle speed: 12000rpm
C-axis speed: 800rpm
X/Y/Z-axis rapid traverse: 36/36/30 m/min
Tool storage capacity: 30T
VISION WIDE TECH CO., LTD.
製品の説明 :
• ASM is the first 5-axis CNC turning and milling machining center of Vision Wide, and it is particularly designed for delicate cylindrical components machining featuring high acceleration, rapid feed-rate and synchronized axes machining, especially for aerospace components, tire molds, turbine blades and aluminum parts.
ASM accessorizes with 5-axis universal head and rotary shafts built-in D.D motor. Through topology analysis, ASM realizes the best distance between tool center point and B-axis transmission
• Positioning P0.006mm
• Repeatability Ps0.0055mm
• Spindle thermal compensation 0.02 mm
• Rapid Traverse 40m/min
• Acceleration 0.3G
• Cutting Feed rate 24 m/min
