展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
HEIDENHAIN CO., LTD. (TAIWAN)
製品の説明 :
Angle encoders for rotary and tilting axes are indispensable for machine tools on which high positioning accuracy and a high machining rate are essential. Because angle encoder measure angular motion of the axis directly and immediately. Mechanical transfer elements therefore have no influence on position measurement, both kinematics errors and the influences of forces are measured by the angle encoder and considered in the position control loop. This can eliminate a number of potential error sources: Gear errors, reversal error, errors due to deformation of the drive mechanics by machining forces.
REN AN INFORMATION TECHNOLOGY CO., LTD.
製品の説明 :
RenAn's operation simulation workstation is a physical simulation with 3D graphic, showing the cutting and machining process.
[Save consumable cost]: There is no need to worry about the expenditure of consumables, and it will not be affected by pollutants such as waste materials and oil and gas.
[Safety]: Advanced 3D simulation and CNC virtual machine make high risk CNC operation without any danger.
[Smart learning]: Like training the pilot using flight simulators, we use CNC simulator to train the students or operators to be the machinist. Its industrial panel remains the same functionality as real machine that students can practice constantly to accumulate hands-on operation skills.
The controller series of simulator: Fanuc, Siemens, Heidenhain and Mitsubishi.
Turning, Milling, TurnMill, 4 axis, 5 axis.
TONGTAI MACHINE & TOOL CO., LTD.
製品の説明 :
‧The VP-12 combines the advantage of a smaller footprint with a large internal machining space, equipped with a high-speed spindle to meet the requirements of efficient and precise machining.
‧Direct-drive spindle BBT-40 provides a high rigidity and high efficiency.
‧The tool magazine allows for flexible tool placement and pre-selection, coupled with a high-speed ATC mechanism to reduce non-cutting time, showcasing efficiency similar to drilling and tapping machining centers.
‧High quality spindle and high rigidity structure design subject to high standards of machine accuracy to achieve good cutting performance.
‧By Tongtai production system, we check every detail process from design, manufacturing, assembly and QC.
HEIDENHAIN CO., LTD. (TAIWAN)
製品の説明 :
Collision protection is a major topic at HEIDENHAIN. The touch probes feature a large deflection path and offer additional safety with rated breaking points in the stylus or the connecting pin to the probe contact.
The TS 460 and TT 460 touch probes feature intelligent battery management in order to minimize current consumption. The touch probe switches in steps to the stand by condition: The longer a touch probe has been switched off, the less current it consumes. Activating a touch probe from a low standby level takes only a split second longer. This ensures high, application oriented availability.
VISION WIDE TECH CO., LTD.
製品の説明 :
GSF Series 5-axis Gantry Type Machining Center, provided excellent 5-axis simultaneous accuracy performance for 5-axis machining in mold cutting, highly precise contour finishing, milling, drilling, and tapping. Vision Wide manufactured the 5-axis machining center to shorten tool displacement travel and cutting process effectively, and to extend tool lifetime and offer the best choice for composite angle machining. GSF Series had excellent dynamic performance on one-piece structural and equipped high accuracy 2-axis head to achieve 5-axis simultaneous accuracy performance.
•Continuous 2-axis head
•5 axis dynamic rotation synchronization accuracy (TCPM) 0.04mm.
•Built-in Spindle Direct-Driven on B&C axis, 12,000~24,000rpm spindle speed.
•Backlashless driving on B/C axis，Rotation Positioning accuracy ±5”.
•Low table height, closer operating zone, wider door width are convenient design for user.
•Chain type chip conveyor (standard) is able to remove iron chips efficiently.
BENIGN ENTERPRISE CO., LTD.
製品の説明 :
• Selective bed width: 300 mm
• With FAG or SKF precision bearings installed on spindle, maximum cutting depth can be 8 mm on 50 mm diameter and best roundness 0.003 mm (200 mm long).
• Thermal treated and precision ground alloy gears.
• Universal gearbox for both imperial and metric thread-conversion table also attached.
• Tracks of cross slide and bed are well lubricated with lubrication pump (manual).
• CE certified
FALCON MACHINE TOOLS CO., LTD.
製品の説明 :
Easy Setup, Flexible and Sealed for Grinding
The FVGC Series of vertical grinding machines is another prime example of Chevalier's position as the global leader in grinding technology. The series seamlessly increases efficiency and productivity for such industries as semiconductor, punch and aerospace, as well as other sectors for which these machines can be equipped. Workpieces in these fields primarily are a composite, single crystal silicon or brittle, along with other materials that present process challenges.
CHIEN CHENS MACHINERY CO., LTD.
製品の説明 :
Specification
Table size: 2600 x 650 mm
Longitudinal travel: 2400 mm
Cross travel: 800 mm
Y slide way width: 1980 mm
Z Slide high: MAX 800 mm
Z Slide way width: 500 mm
Spindle taper: NT#50(BT)
Spindle motor: 7.5HP / 4P
Spindle speed: 70~1200 RPM
Feeding speed: 10~6000 mm/min
Ballscrew: Ø40 mm P=8 C3
Net weight: 6800 kgs
YIH KUAN ENT CO., LTD.
製品の説明 :
The CNC Milling Head can tackle all sorts of critical processes, such as rough milling, finishing milling, boring holes, and much more. It's easily compatible with a number of different machines, like computer gantry milling machines, machining centers, and so on. Don't let small spaces or tight curves slow down your projects - the CNC Milling Head is compact enough to fit even into the most complex of workspaces. Plus its precise performance ensures that you get results exactly how you need them - every time. With the CNC Milling Head you can take your machining to the next level while saving time and money in the process.
1. The IK milling head, which fits your current milling machines and special purpose machines, can take place of your current milling heads and upgrade your machines.
2. This product with gear-type construction is very powerful and can creat a maximum machining efficiency for you
3. Spindle speed change has high and low two stage.
4. This product can be installed to a computer-controlled vertical milling machine and a special purpose machine.
5. This products doesn't include a servo motor or servo controller.
6. The IK CNC milling head series has three kinds of products.
