展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
TAI CHONG CO., LTD.
製品の説明 :
用途： CNC切削中心機，銑床，龍門銑床，電腦銑床等切削作業。<br />
特性：<br />
本體與面板一體成型加工完成。<br />
以電控操作，快速充脫磁場變換。<br />
以永久磁鐵吸著工件，沒有停電的危險性。<br />
吸磁作業面，螺栓孔可應用於模具及固定方式的變化。<br />
可配合彈性導磁塊，針對變形平面，作平面加工，大量節省調整時間，提高工作效率。<br />
結構剛性佳，配合精度穩定，適合高精度加工作業。<br />
與強力型電磁鐵比較，大幅度節省電力消耗。<br />
防水效果最確實，保證不漏水，不漏電。<br />
平均吸磁力18kgf/cm2以上。
CLAMPTEK ENTERPRISE CO., LTD.
製品の説明 :
＊High supporting force
CSP-P/ CSP-K increases the holding force between the piston rod and the inner jacket to arise the higher supporting force.
＊Coolant cleaning measures
In order to prevent the malfunction from the intrusion of high-pressure coolant and the cutting dust entering the internal structure, air can be cleaned at the breathing port when replacing the workpiece. Air cleaning requires a dedicated air circuit. (recommended cleaning pressure is 0.3 - 0.5MPa).
＊Universal piping base
CSP-P/ CSP-K piping base is interchangeable, which can be installed with other low-pressure cylinders in the same specifications.
CLAMPTEK ENTERPRISE CO., LTD.
製品の説明 :
Clamptek’s CLF5H series designed with connecting rod structure which can operate conveniently. CLF5H series can also reduce the interference with loading and unloading operation, because when CLF5H series is in the unclamping state, it’s clamping arm can be put lower than holding position.
Clamptek’s CLF5H series’ clamping arm is very flexible. By reducing the interference of the surrounding equipment, CLF5H series can save lots of working space.
Clamptek’s CLF5H series equipped with special dust proof design and high sealing, which can prevent the cutting chips and coolant to infiltration. Therefore, CLF5H series can be used in more severe conditions.
Please kindly check the suggested operating pressure as below,
Max. operating pressure: 70 kgf/cm2
Min. operating pressure: 10 kgf/cm2
Taiwan TeamA Tech. Co., Ltd.
製品の説明 :
formlabs 熱銷光固化機種 Form 3+/3B+ 搭載專利研發「低應力光固化成型技術（LFS）」，其特色包含彈性樹脂槽與封閉式光學模組（LPU）等，雷射光可垂直照射到物件，大幅增加機器的可靠與穩定性，可印出高精確度、平滑度及透度更佳的高品質物件，桌面級的機種，也能達到工業級的效果。
搭配上為 Form 3+/3B+ 量身打造的後處理設備－自動清洗機 Form Wash 及恆溫光固機 Form Cure，提供完整、快速的 3D 列印製造流程。
Form 3+ 六大特色包括：
1. 前所未有的表面精細度
2. 極平滑的物件表面與透度
3. 彈性樹脂槽使成功率大增
4. 遠端列印超easy
5. 無與倫比的30多種多元樹脂材料
6. 輕觸支撐材帶來最佳效率
