展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
TAI CHONG CO., LTD.
製品の説明 :
用途: CNC切削中心機,銑床,龍門銑床,電腦銑床等切削作業。<br />
特性:<br />
本體與面板一體成型加工完成。<br />
以電控操作,快速充脫磁場變換。<br />
以永久磁鐵吸著工件,沒有停電的危險性。<br />
吸磁作業面,螺栓孔可應用於模具及固定方式的變化。<br />
可配合彈性導磁塊,針對變形平面,作平面加工,大量節省調整時間,提高工作效率。<br />
結構剛性佳,配合精度穩定,適合高精度加工作業。<br />
與強力型電磁鐵比較,大幅度節省電力消耗。<br />
防水效果最確實,保證不漏水,不漏電。<br />
平均吸磁力18kgf/cm2以上。
CLAMPTEK ENTERPRISE CO., LTD.
製品の説明 :
Clamptek’s CLF5H series designed with connecting rod structure which can operate conveniently. CLF5H series can also reduce the interference with loading and unloading operation, because when CLF5H series is in the unclamping state, it’s clamping arm can be put lower than holding position.
Clamptek’s CLF5H series’ clamping arm is very flexible. By reducing the interference of the surrounding equipment, CLF5H series can save lots of working space.
Clamptek’s CLF5H series equipped with special dust proof design and high sealing, which can prevent the cutting chips and coolant to infiltration. Therefore, CLF5H series can be used in more severe conditions.
Please kindly check the suggested operating pressure as below,
Max. operating pressure: 70 kgf/cm2
Min. operating pressure: 10 kgf/cm2
Taiwan TeamA Tech. Co., Ltd.
製品の説明 :
Form 3L為 Formlabs 推出的大型光固化3D列印機,是一款成型空間達擁有達33.5*20*30cm的桌面級3D列印機,讓您的想像力不受限!採用最新專利研發的低應力光固化成型技術(LFS),擁有彈性樹脂槽與封閉式光學模組(LPU)等,大幅增加了機器的可靠與穩定性,精確度、平滑度及透度都大大增加,讓您的大物件也擁有精緻細節!搭配Form Wash L自動清洗機與Form Cure L溫控光固機,以磁力迴旋可一次清洗一個Form 3L平台或是兩個Form 3平台,並使用兩個500W加熱器與大功率紫外線燈全方位高度強化,發揮材料最佳性能!
Form 3L特色包含
1. 33.5*20*30cm 超大列印空間
2. 大型物件也有大大的細緻度
3. 彈性成型槽印大型實心物件也不怕
4. 專利LFS技術配合光學模組使透度平滑度大幅提升
5. 雙卡匣智能給料,安心列印不中斷
6. 高達20多種樹脂滿足外觀、功能驗證需求
7. 輕觸支撐材,好拆不麻煩
8. 繁體中文切片軟體PreForm超好用
Taiwan TeamA Tech. Co., Ltd.
製品の説明 :
建立於 Fuse 1 成功的基礎下,formlabs 推出進階款選擇性雷射燒結(Selective Laser Sintering, SLS)3D列印機 Fuse 1+30W 及粉末回收系統 Fuse Sift。提升2倍的列印速度,在3倍的雷射功率下,實現真正快速的企業內部生產!使用尼龍粉末燒結技術,搭載高轉換效率的「掺鐿光纖雷射」與專利研發技術「表面盔甲技術」(Surface Armor),讓用戶獲得更穩定的列印品質與更堅固的物件表面。
Formlabs一直以來對於人體健康與環境保護都十分重視,Fuse 1在運轉時,通過國家室內空氣品質標準,其中包含甲醛、TVOC、PM2.5、及PM10…等揮發性有機物測試,列印中不會產生有害氣體,另外也配有完善的粉末回收系統Fuse Sift。除了能將舊粉末過濾後重複使用,還可自動化混合新舊粉、自行選擇刷新比例,減去繁雜的手動混合程序,不僅環保不浪費,更能以最低耗損帶來最高產值。
【Fuse 1+30W 六大特色】
1. 16.5*16.5*30cm 超大列印空間
2. 掺鐿光纖雷射穩定的光束品質
3. 專利Surface Armor技術物件更堅固
4. 粉末回收率高、擁有自動粉末混合系統
5. 兼具高韌性、耐高溫、耐衝擊的多元性能列印材料
6. 繁體中文切片軟體PreForm超好用
CLAMPTEK ENTERPRISE CO., LTD.
製品の説明 :
*High supporting force
CSP-P/ CSP-K increases the holding force between the piston rod and the inner jacket to arise the higher supporting force.
*Coolant cleaning measures
In order to prevent the malfunction from the intrusion of high-pressure coolant and the cutting dust entering the internal structure, air can be cleaned at the breathing port when replacing the workpiece. Air cleaning requires a dedicated air circuit. (recommended cleaning pressure is 0.3 - 0.5MPa).
*Universal piping base
CSP-P/ CSP-K piping base is interchangeable, which can be installed with other low-pressure cylinders in the same specifications.
JIN YEAR PRECISION CO., LTD.
製品の説明 :
1.Down thrust with"semi-sphere"to prevent workpiece lift.
2.Mechanical/Hydraulic. Two operate methods.
3.Vise body is made of ductile iron FCD-60.
4.Vise bed hardened to HRC45 and maintain accuracy for long.
5.Vise bed height-size and the guide block side are all made with full control, can 2.3 or 4 vises to perform a job at a time.
6.Vise have 4 ways of clamping. For you to choice.