展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
YOKE INDUSTRIAL CORP
製品の説明 :
•Rotates through 360° and pivot 90°.
•Manufactured from alloy steel, quenched and tempered.
•Manufactured and tested in accordance with EN1677-1.
•Load rated parts are 100% magnaflux crack detected.
•Individual forged parts and cap screw are traceable to Test Certification.
•Bolts are Metric thread (ASME / ANSIB18.3.1M), specification is grade 12.9 alloy socket head screw per DIN EN ISO 4762.
•Individually proof tested to 2.5 times the WLL.
•Fatigue rated to 1.5 times the WLL.
•All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
•Quick and simple assembly, just a tapped hole is required.
TAIKI INDUSTRIAL CO., LTD.
製品の説明 :
The jaw t-nuts (T08) are suitable for Kitagawa B-208 Chucks.
The jaw t-nuts connect with a power chuck and soft jaws.
YANMECH Industrial Co., Ltd.
製品の説明 :
Product Features：Different from the previous positioning of the box jaws by the positioning key, this product will positioning parts into the product, can be locked with the screw lock or unlock, can avoid the traditional positioning the possibility of flying out in the rotation and the advantage of easy assembly.
Taiwan TeamA Tech. Co., Ltd.
製品の説明 :
Form 3L為 Formlabs 推出的大型光固化3D列印機，是一款成型空間達擁有達33.5*20*30cm的桌面級3D列印機，讓您的想像力不受限！採用最新專利研發的低應力光固化成型技術（LFS），擁有彈性樹脂槽與封閉式光學模組（LPU）等，大幅增加了機器的可靠與穩定性，精確度、平滑度及透度都大大增加，讓您的大物件也擁有精緻細節！搭配Form Wash L自動清洗機與Form Cure L溫控光固機，以磁力迴旋可一次清洗一個Form 3L平台或是兩個Form 3平台，並使用兩個500W加熱器與大功率紫外線燈全方位高度強化，發揮材料最佳性能！
Form 3L特色包含
1. 33.5*20*30cm 超大列印空間
2. 大型物件也有大大的細緻度
3. 彈性成型槽印大型實心物件也不怕
4. 專利LFS技術配合光學模組使透度平滑度大幅提升
5. 雙卡匣智能給料，安心列印不中斷
6. 高達20多種樹脂滿足外觀、功能驗證需求
7. 輕觸支撐材，好拆不麻煩
8. 繁體中文切片軟體PreForm超好用
HUI BAO ENTERPRISE CO.,LTD
製品の説明 :
FEATURES：
Able to clamp the workpiece from both inside and outside, apply for embedded sensor, two directions inlet
APPLICATION：
CNC loading and unloading the workpiece, jigs and fixture
Taiwan TeamA Tech. Co., Ltd.
製品の説明 :
擺脫時間、地點的限制，利用自動化生產解決方案再創生產率新高！無需人工操作，24小時不停機生產，製造大量、高質量物件，使用 Formlabs 自動化解決方案（包含 Form Auto、群機管理和高容量樹脂系統），在 3D 列印工作流程中更高效的工作並重新定義生產能力。在不增加列印機管理複雜性的情況下擴展您的零件生產。從任何地方點擊發送，Formlabs 自動化解決方案將處理剩下的工作流程。
【最大程度地降低每個零件的成本，節省高達 80% 的勞動力】
在 Form Auto 出現之前，每個完成的零件都需要在後處理之前從成型平台上手動移除。Form Auto 透過將 Formlabs 獲得專利的「快速剝離技術」與「成型平台 V2 」結合使用，完全自動化地移除零件。蒐集的零件被放置在防紫外線的容器中，無縫批量轉移到 Form Wash。
【24 小時不間斷 3D 列印，無需額外程序】
Form Auto 自動化生產系統旨在不閒置列印機、不讓列印物件在序列中等待，無論現場是否有操作人雃，Form Auto 始終準備好開始下一次列印。 隨時隨地構建多列印機群，從辦公室點擊「列印」，立即在生產間開始生產。透過群機管理中的圖像和影片遠程監控和審查成品零件，設備內相機在完成時捕獲每個列印件來保存每個部分的記錄。
CLAMPTEK ENTERPRISE CO., LTD.
製品の説明 :
The Thread-body single acting hydraulic cylinder use imported oil seal and accessories to guarantee the quality. No oil leakage while clamping in high pressure for a long time. The volume of the thread-body single acting hydraulic cylinder is small. It can be utilized in a small space in the fixture.
This hydraulic cylinder is used to extend out, and when spring returns, but it can't be used for pulling back.
The angle degree between the cylinder and workpiece could not be larger than 10° while installing.
The bottom of the cylinder barrel needs a leakage-proof gasket.
Max. operating pressure: 250 kgf/cm²
Min. operating pressure: 20 kgf/cm²
Single acting
Usable fluid:
Taiwan TeamA Tech. Co., Ltd.
製品の説明 :
Fuse Blast 是一種易於使用的全自動清潔和拋光解決方案，適用於 SLS 3D 列印零件的後處理流程，有助於更快速更輕鬆地製造專業的、一致的高潔淨度零件。Fuse Blast 可無縫整合到 Fuse 系列生態圈中，協助簡化後處理工作流程，讓您能夠在 30 分鐘內徹底清潔整個成型室內的全部列印零件，並大幅減少人工操作時間和成本。 透過選購的拋光系統，Fuse Blast 可將零件拋光至光滑、半亮面和可染色的三種不同的表面光潔度，始終如一地提供專業級效果，從而進一步提高零件外觀品質。
YA LIANG INDUSTRIAL CO., LTD.
製品の説明 :
The brand new design- the whole aluminum thick arm. Perfect tight and more convenient, can be adjusted for a variety of dial Indicators in any direction.
CLAMPTEK ENTERPRISE CO., LTD.
製品の説明 :
Clamptek’s CLF5H series designed with connecting rod structure which can operate conveniently. CLF5H series can also reduce the interference with loading and unloading operation, because when CLF5H series is in the unclamping state, it’s clamping arm can be put lower than holding position.
Clamptek’s CLF5H series’ clamping arm is very flexible. By reducing the interference of the surrounding equipment, CLF5H series can save lots of working space.
Clamptek’s CLF5H series equipped with special dust proof design and high sealing, which can prevent the cutting chips and coolant to infiltration. Therefore, CLF5H series can be used in more severe conditions.
Please kindly check the suggested operating pressure as below,
Max. operating pressure: 70 kgf/cm2
Min. operating pressure: 10 kgf/cm2
