展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
Taiwan TeamA Tech. Co., Ltd.
製品の説明 :
Form 3L為 Formlabs 推出的大型光固化3D列印機，是一款成型空間達擁有達33.5*20*30cm的桌面級3D列印機，讓您的想像力不受限！採用最新專利研發的低應力光固化成型技術（LFS），擁有彈性樹脂槽與封閉式光學模組（LPU）等，大幅增加了機器的可靠與穩定性，精確度、平滑度及透度都大大增加，讓您的大物件也擁有精緻細節！搭配Form Wash L自動清洗機與Form Cure L溫控光固機，以磁力迴旋可一次清洗一個Form 3L平台或是兩個Form 3平台，並使用兩個500W加熱器與大功率紫外線燈全方位高度強化，發揮材料最佳性能！
Form 3L特色包含
1. 33.5*20*30cm 超大列印空間
2. 大型物件也有大大的細緻度
3. 彈性成型槽印大型實心物件也不怕
4. 專利LFS技術配合光學模組使透度平滑度大幅提升
5. 雙卡匣智能給料，安心列印不中斷
6. 高達20多種樹脂滿足外觀、功能驗證需求
7. 輕觸支撐材，好拆不麻煩
8. 繁體中文切片軟體PreForm超好用
ASMITH MANUFACTURING COMPANY
製品の説明 :
Spring Loaded Draw Latch ｜The proposed load of 22~50 kgf.
Both sides spring design with compression function.
Standard Lock-hole can using with lock. Suitable for vibration equipment.
Smooth surface, excellent brushed finish appearance, in accordance with RoHS.
The draw latch is including the horizontal keeper [CS(T)-0120-2 or CS(T)0130-2], if you need another type keeper then you can reference the below "Accessories".
➤Material: SUS304(Stainless steel)-vibration ground and brushed finish, SPCC(cold-rolled steel)-zinc plated
YOKE INDUSTRIAL CORP
製品の説明 :
•Rotates through 360° and pivot 90°.
•Manufactured from alloy steel, quenched and tempered.
•Manufactured and tested in accordance with EN1677-1.
•Load rated parts are 100% magnaflux crack detected.
•Individual forged parts and cap screw are traceable to Test Certification.
•Bolts are Metric thread (ASME / ANSIB18.3.1M), specification is grade 12.9 alloy socket head screw per DIN EN ISO 4762.
•Individually proof tested to 2.5 times the WLL.
•Fatigue rated to 1.5 times the WLL.
•All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
•Quick and simple assembly, just a tapped hole is required.
CLAMPTEK ENTERPRISE CO., LTD.
製品の説明 :
＊High supporting force
CSP-P/ CSP-K increases the holding force between the piston rod and the inner jacket to arise the higher supporting force.
＊Coolant cleaning measures
In order to prevent the malfunction from the intrusion of high-pressure coolant and the cutting dust entering the internal structure, air can be cleaned at the breathing port when replacing the workpiece. Air cleaning requires a dedicated air circuit. (recommended cleaning pressure is 0.3 - 0.5MPa).
＊Universal piping base
CSP-P/ CSP-K piping base is interchangeable, which can be installed with other low-pressure cylinders in the same specifications.
