展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
CLAMPTEK ENTERPRISE CO., LTD.
製品の説明 :
Clamptek’s CLKA series is using the optimal designation, so the clamping capacity is higher than other cylinders. The cylinder body and the fulcrum are integrated structured. Therefore, the cylinder’s size is smaller and it’s more solid and firm.
Clamptek’s CLKA series uses special dust seals to ensure the high dust proof and high sealing performance. As for the lower flange part, which uses minimized designation, it’s suitable for the compact and light fixture.
If you have any customized requests, please feel free to contact us.
Please kindly check the suggested operating pressure as below,
Max. operating pressure: 70 kgf/cm2
Min. operating pressure: 10 kgf/cm2
YANMECH Industrial Co., Ltd.
製品の説明 :
【J Series:】
1. Adapter Plates can be selected.
2. Install side strips and chips cover sealed base jaw to prevent chips and coolant ingress.
3. The jaw can be individually operated, and irregularly shaped workpieces can be clamped.
4. Special specifications can be customized.
【L Series:】
1. Adapter Plates can be selected.
2. The jaw can be individually operated, and irregularly shaped workpieces can be clamped.
3. Special specifications can be customized.
ASMITH MANUFACTURING COMPANY
製品の説明 :
Spring Loaded Draw Latch |The proposed load of 22~50 kgf.
Both sides spring design with compression function.
Standard Lock-hole can using with lock. Suitable for vibration equipment.
Smooth surface, excellent brushed finish appearance, in accordance with RoHS.
The draw latch is including the horizontal keeper [CS(T)-0120-2 or CS(T)0130-2], if you need another type keeper then you can reference the below "Accessories".
➤Material: SUS304(Stainless steel)-vibration ground and brushed finish, SPCC(cold-rolled steel)-zinc plated
CLAMPTEK ENTERPRISE CO., LTD.
製品の説明 :
The Thread-body single acting hydraulic cylinder use imported oil seal and accessories to guarantee the quality. No oil leakage while clamping in high pressure for a long time. The volume of the thread-body single acting hydraulic cylinder is small. It can be utilized in a small space in the fixture.
This hydraulic cylinder is used to extend out, and when spring returns, but it can't be used for pulling back.
The angle degree between the cylinder and workpiece could not be larger than 10° while installing.
The bottom of the cylinder barrel needs a leakage-proof gasket.
Max. operating pressure: 250 kgf/cm²
Min. operating pressure: 20 kgf/cm²
Single acting
Usable fluid:
TAI CHONG CO., LTD.
製品の説明 :
用途: CNC切削中心機,銑床,龍門銑床,電腦銑床等切削作業。<br />
特性:<br />
本體與面板一體成型加工完成。<br />
以電控操作,快速充脫磁場變換。<br />
以永久磁鐵吸著工件,沒有停電的危險性。<br />
吸磁作業面,螺栓孔可應用於模具及固定方式的變化。<br />
可配合彈性導磁塊,針對變形平面,作平面加工,大量節省調整時間,提高工作效率。<br />
結構剛性佳,配合精度穩定,適合高精度加工作業。<br />
與強力型電磁鐵比較,大幅度節省電力消耗。<br />
防水效果最確實,保證不漏水,不漏電。<br />
平均吸磁力18kgf/cm2以上。
CLAMPTEK ENTERPRISE CO., LTD.
製品の説明 :
*High supporting force
CSP-P/ CSP-K increases the holding force between the piston rod and the inner jacket to arise the higher supporting force.
*Coolant cleaning measures
In order to prevent the malfunction from the intrusion of high-pressure coolant and the cutting dust entering the internal structure, air can be cleaned at the breathing port when replacing the workpiece. Air cleaning requires a dedicated air circuit. (recommended cleaning pressure is 0.3 - 0.5MPa).
*Universal piping base
CSP-P/ CSP-K piping base is interchangeable, which can be installed with other low-pressure cylinders in the same specifications.