展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
NINE-9 CUTTING TOOLS CO., LTD.
製品の説明 :
NC Helix Drill cuts material by helical interpolation; serrated cutting edge minimizes chip length.
Low spindle power is not a problem, good for drilling material that generates long, soft chips.
● Reduce Your Tool Inventory
Each holder can machine di erent diameters and hole depths, saving your tool inventory and cost!
No need to peck drill or dwell in operation even machine without internal coolant.
● Lower spindle power consumption Easy to cut!
• Thanks to the small cutting load of the serrated cutting edge and helical interpolation lower power consumption. Work quicker, smarter and achieve better results.
• Circular ramping milling, maximum ramping angle is 20°. For example: tool HD27 machining Ø50 mm hole, 9 mm pitch for aluminum, 6 mm pitch for carbon steel.
● Special insert geometry - exceptional swarfs control.
• Serrated cutting edge makes the chips short and small, and easier to evacuate.
• Eliminate swarf and vibration problems while drilling di cult material or deeper holes.
● “One tool” performs multiple applications
• Not only a drill, but an end mill too.
• Small radius path to cut a hole or step hole, various curved cavity shapes on di erent materials.
SHARP ONE CO., LTD.
製品の説明 :
M26AB is of good quality and meets market needs. It solves the
incomplete design of the traditional end mill grinding machine on the
original market. Compared to other brands, M26AB features are as
follows.
Single piece grinding wheel can grind different end gash, first to none.
It can grind variable index and spiral.
Positioning is visible. Grinding intensive and powerful blades is
adjustable.
Grinding carbide flat drill bit.
Grinding chip flutes positive angles.
Standard vacuum can decrease chips spreading, good for health and
machine.
M26AB multi-function machine greatly reduces the cost of end mills
and increases the efficiency. It is the first end mill grinding machine with
standardized positioning, standardized & friendly operation, and multifunction
on the market. These advantages attract users to test our
machines and prove that M-26-AB can help their daily work.
NINE-9 CUTTING TOOLS CO., LTD.
製品の説明 :
Nine9 chamfer mill is designed for chamfering and countersinking with an indexable insert.
The insert is a specifically designed for use in high speed machining ; the multiple flutes
provide for increased feed rate, optimizing performance and reducing cutting time.
High performance chamfer tool for upgrading your machining process.
For front and back chamfering. Eliminates 2nd operation or deburring time.
● Excellent Repeatability
• Smallest Indexable counter sink, diameter ø7 mm.
• The insert is dual-relief angle, specially edge honning and optimized coated for high cutting speed.
• Optimized the number of teeth on the holder to achieve higher feed rate.
● Economical
• Each insert has 4 cutting edges.
• Long tool life.
● Applications
• For front and back chamfering.
• 90° counter sink and 45° chamfering.
• For counter sink, circular chamfering, contour chamfering and face milling.
NINE-9 CUTTING TOOLS CO., LTD.
製品の説明 :
The “ i-Center ” is a trademark of Nine9,
the developer of the first indexable center drill in the world.(Patented)
Offering an indexable insert system for the 1st time, Nine9’s “i-Center ” design improves your process performance. Shortens set up and center drilling time.Increases tool life and reduces tooling costs.
● High Speed, High Feed Rate
• The special ground insert and rigid holder design facilitate high performance speed and feed rates. For example, drilling alloy steel
at 6000 rpm and feed rate of 600 mm/min. (0.1 mm/rev.).
● Excellent Repeatability
• The positioning repeatability of the insert is within 0.02 mm
(.0008”) in radial direction, thus ensuring conformity to any national
standards.
● Easy Tool Length Setting
• The axial position accuracy of the insert is 0.05 mm (.002”). It is
not necessary to reset the tool length when changing or cutting edge.
● Extended Tool Life
• Coolant can be supplied through the center of the holder to increase performance and extend tool life.
• Insert geometry, grades and coating process are specifically engineered for centering applications.
EANG LIAN CORPORATION
製品の説明 :
刷、磨、拋、洗<br />
專業化的設計能力<br />
多樣化的線材應用<br />
客制化的生產系統<br />
提供客戶製程製品-刷、磨、拋、洗.全方位的解決方案<br />
瑩聯股份有限公司—主要供應各式工業用刷是工業用刷之專業設計製造廠、擁有自有品牌(優利牌),產品適用於各行各業。無論需要刷洗、精細研磨、拋光、輕研磨、重研磨、毛邊去除、深孔加工皆有顯著效果!<br />
<br />
主要產品:<br />
1.動力輪刷系列適用於各型電動及汽動工具.<br />
2.矽砂尼龍研磨刷系列可針對各種表面精細研磨.<br />
3.輪軸刷及板槽刷系列接受各種線材及特殊尺寸訂製<br />
4.鋼鐵業退火酸洗、脫脂清洗、刷磨、清洗等大型刷輥<br />
5.德國技術合作專業生產高科技合成纖維輥適-用於鋼鐵軋片產線之刮油輥、塗油輥、擠水輥、張力輥、轉向輥、擠油輥、擠乾輥、擠壓輥、擠水輥、不織布擠水 輥。 6.各種線材及特殊尺寸可依照客戶需要量身訂製
YATAGHAN ENTERPRISE CO., LTD.
製品の説明 :
Cristone Bristle Brush consists of Crystal Fiber Stones. The cutting performance, tool life and flexibility is superior than any other polishing stones or brushes.
It can efficiently remove the roughness of the surface but prevent excessive shaving.
For different grinding purposes and processing ways, we provide a wide selection of variable types for solutions so you can greatly boost your efficiency of grinding or polishing.