展示テーマ
デジタルトランスフォーメーション
グリーントランスフォーメーション
NINE-9 CUTTING TOOLS CO., LTD.
製品の説明 :
NC Helix Drill cuts material by helical interpolation; serrated cutting edge minimizes chip length.
Low spindle power is not a problem, good for drilling material that generates long, soft chips.
● Reduce Your Tool Inventory
Each holder can machine di erent diameters and hole depths, saving your tool inventory and cost!
No need to peck drill or dwell in operation even machine without internal coolant.
● Lower spindle power consumption Easy to cut!
• Thanks to the small cutting load of the serrated cutting edge and helical interpolation lower power consumption. Work quicker, smarter and achieve better results.
• Circular ramping milling, maximum ramping angle is 20°. For example: tool HD27 machining Ø50 mm hole, 9 mm pitch for aluminum, 6 mm pitch for carbon steel.
● Special insert geometry - exceptional swarfs control.
• Serrated cutting edge makes the chips short and small, and easier to evacuate.
• Eliminate swarf and vibration problems while drilling di cult material or deeper holes.
● “One tool” performs multiple applications
• Not only a drill, but an end mill too.
• Small radius path to cut a hole or step hole, various curved cavity shapes on di erent materials.
SHARPMAX TOOL INC.
製品の説明 :
● Engineered with eccentric relief for maximum edge strength in both roughing and finishing applications.
● Variable pitch geometry results in higher quality parts by decreasing chatter and harmonics.
● ZrN coating offers high hardness for estended tool life in high temp alloys and ferrous metals including stainless stee.
VISION WIDE TECH CO., LTD.
製品の説明 :
GSF Series 5-axis Gantry Type Machining Center, provided excellent 5-axis simultaneous accuracy performance for 5-axis machining in mold cutting, highly precise contour finishing, milling, drilling, and tapping. Vision Wide manufactured the 5-axis machining center to shorten tool displacement travel and cutting process effectively, and to extend tool lifetime and offer the best choice for composite angle machining. GSF Series had excellent dynamic performance on one-piece structural and equipped high accuracy 2-axis head to achieve 5-axis simultaneous accuracy performance.
•Continuous 2-axis head
•5 axis dynamic rotation synchronization accuracy (TCPM) 0.04mm.
•Built-in Spindle Direct-Driven on B&C axis, 12,000~24,000rpm spindle speed.
•Backlashless driving on B/C axis，Rotation Positioning accuracy ±5”.
•Low table height, closer operating zone, wider door width are convenient design for user.
•Chain type chip conveyor (standard) is able to remove iron chips efficiently.
NINE-9 CUTTING TOOLS CO., LTD.
製品の説明 :
This is a revolutionary new concept of engraving tools with indexable carbide inserts. They offer you the ability to produce HIGH QUALITY ENGRAVING in most materials.
The latest coated carbide grades help you to obtain higher speed and feed rate, dramatically reducing your cycle time.
● High Positive Rake Angle
• Indexable insert.
• Suitable for engraving all types of materials, such as plastic, non-ferrous metal, aluminum, copper, carbon steel and stainless steel.
● Multi-Side Grinding
• Full peripherally ground insert to ensure efficient repeatability.
• It performs excellently without producing any burrs, especially in copper, aluminum and stainless steel.
● High Speed, High Feed Rate
• Designed to run at high speed, up to 40,000 r.p.m.
• Feed rate 0.08mm (0.003”) / rev. apply to aluminum; 0.05mm (0.002”) / rev. apply to stainless steel.
• Reduces engraving cycle time!
● Economical
• Each indexable insert has 2 cutting edges.
• No resharpening required. Tool length is unchanged.
• No need to reset after changing insert or cutting edge.
• Excellent repeatability!
DEEP JET INDUSTRY CO., LTD.
製品の説明 :
1.Special cutting-edge design with low resistance to reach better chip-off from the groove. This shows the tool's stability in high speed machining.
2.The special coating enhances the anti-oxidation and wear resistance to increase high speed performance.
◆Carbide Drills With Internal Coolant Holes:
Internal coolant holes can highly increase the performance of cooling and chip removal rate.
◆Carbide Flat Drills:
Good for curve and inclined surface machinning.
JIN LI CHENG CUTTING TOOL CO., LTD.
製品の説明 :
睽違2年，深受全球客戶喜愛的金利成SUPER系列，再加入新的主力軍!!!
從大家熟知的JAVN/SUS/ALUS/JIB等四大革命性航太與難切削材刀具，JLC團隊再以最新刀款設計與鍍層來支援航太，複合材，高效抗震與擺線加工等客戶多種加工系統的應用，以滿足日趨多元的加工需求。
這次的SUPER系列新增JMD碳纖複合材專用銑刀，NEO高效抗震銑刀以及 HP5擺線加工專用的銑刀，融合了先前對歐系棒材的堅持與刀款鍍膜的創新，不但在加工上解決客戶最難處理的材料問題，更在穩定度及與效率上考慮到客戶的需求。因此，除了獲得國家專利的認可，相信更能為客戶提供最優質的加工選擇。
SUPER系列新品已開始量產，竭誠歡迎全球客戶諮詢與測試。
JLC研發團隊的用心，絕對讓您在加工上安心。
